home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: alt.cd-rom
- Path: sparky!uunet!infonode!ingr!b11!kaos.b11.ingr.com!ross
- From: ross@kaos.b11.ingr.com (Ross Erickson)
- Subject: Re: MSCDEX loading hi?
- Message-ID: <1993Jan21.172253.21824@b11.b11.ingr.com>
- Sender: usenet@b11.b11.ingr.com (Usenet Network)
- Reply-To: ross@kaos.b11.ingr.com
- Organization: Intergraph Corporation
- References: <7DaLXB1w165w@mongobbs.new-orleans.la.us> <1993Jan19.122342.6210@magnus.acs.ohio-state.edu>
- Date: Thu, 21 Jan 1993 17:22:53 GMT
- Lines: 28
-
- In article <1993Jan19.122342.6210@magnus.acs.ohio-state.edu>, jnlong@magnus.acs.ohio-state.edu (Jeffrey N Long) writes:
- >In article <7DaLXB1w165w@mongobbs.new-orleans.la.us> todd@mongobbs.new-orleans.
- >la.us (todd toles) writes:
- >>Can one load MSCDEX high using QEMM 6.0X? If so, could someone explain
- >>to me how to do it, or point me to a source that can?
- >>
- >>Thanks.
- >>
- >>Todd E. Toles / UNO PO 645, New Orleans, LA 70148-0645
- >>Todd@Mongobbs.UUCP (or Todd@mongobbs.new-orleans.la.us)
- >
- > I have been working on this very problem all weekend, and finaly found the
- >parameter /e. this loads MSCDEX into ram above 640. I was using EMM386 but
- >any manager should work.
-
- This will only work if you have EMS (Expanded memory) setup. I don't
- with QEMM (NOEMS setting). How do you put it into HMA or memory above
- 640K. The EMS config uses too much high memory because of the 64K
- memory window.
-
- --
- |------------------------------------------------------------------|
- | Ross Erickson | |
- | ross@kaos.b11.ingr.com | Read GAME BYTES Magazine! Found |
- | 205-730-4019 - voice | on ftp.ulowell.edu and |
- | 205-730-6445 - fax | wuarchive.wustl.edu. Check it out! |
- | Internet: 129.135.252.87 | |
- |------------------------------------------------------------------|
-