home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!paladin.american.edu!gatech!usenet.ins.cwru.edu!po.CWRU.Edu!dxk10
- From: dxk10@po.CWRU.Edu (David Kazdan Md)
- Newsgroups: rec.models.rc
- Subject: Re: FliteKote<=>MonoKote?
- Date: 29 Dec 1992 21:30:31 GMT
- Organization: Case Western Reserve University, Cleveland, OH (USA)
- Lines: 19
- Message-ID: <1hqg1nINN85g@usenet.INS.CWRU.Edu>
- References: <swhite.725657520@convex.com>
- Reply-To: dxk10@po.CWRU.Edu (David Kazdan Md)
- NNTP-Posting-Host: slc5.ins.cwru.edu
-
-
- In a previous article, swhite@convex.com (Steve Whiteside) says:
-
- >I have just finished up the framework on my GentleLady. I started
- >looking into covering materials and realized I had some FliteKote
- >left over from another project. The GentleLady instruction sheet
- >recommends SuperMonoKote as a covering material.
- >
- (Congrats on finishing the GL, and good luck flying it)
-
- I was sold Ultracote, which is a _Goldberg_ product; it seemed
- to work fine and I wonder why Goldberg doesn't specify it?
-
- David, AD8Y
-
- --
- David Kazdan, M.D., Ph.D dxk10@po.cwru.edu
- Department of Anesthesiology, University Hospitals of Cleveland, Ohio
- Amateur Radio: AD8Y
-