home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!wupost!cs.utexas.edu!sun-barr!west.West.Sun.COM!cronkite.Central.Sun.COM!sixgun.East.Sun.COM!seven-up.East.Sun.COM!sungy!stasys!alanya!lupe
- From: lupe@ukw.uucp (Lupe Christoph)
- Newsgroups: comp.sys.sun.hardware
- Subject: Re: Sun 3/60 SCSI Port
- Message-ID: <1993Jan2.183136.20670@ukw.uucp>
- Date: 2 Jan 93 18:31:36 GMT
- References: <C032sB.9st@vuse.vanderbilt.edu>
- Sender: news@stasys.sta.sub.org
- Organization: cic
- Lines: 19
-
- dougvoss@vuse.vanderbilt.edu (Douglas Voss) writes:
-
- >I have heard a couple of vague references to problems with the SCSI
- >port on Sun 3/60's.
-
- >Can anyone confirm/deny the existence of a problem? Further can
- >anyone fill me in on the details? (which pins are wrong etc)
-
- Can you try to be more specific? Or is this all you heard?
-
- In any case, the problem I remember is that on the earlier
- 3/60's, the TERMPWR pin is shorted to ground. Verify this before
- connecting any equipment you not damn sure of. Best is to measure
- for a short on the 3/60, and for voltage on TERMPWR on the peripherals.
- --
- | ...!unido!ukw!lupe (German EUNet, "bang") | Disclaimer: |
- | lupe@ukw.UUCP (German EUNet, domain) | This is an unofficial |
- | suninfo!alanya!lupe (Sun Germany) | opinion of Christoph & |
- | Res non sunt complicanda praeter necessitatem. | Imschweiler Consulting |
-