home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.novell
- Path: sparky!uunet!gatech!darwin.sura.net!max.fiu.edu!serss0!reza
- From: reza@serss0 (Gholam Reza Omidipour)
- Subject: Help with Netware 2.2 installation
- Organization: Florida International University
- Date: Mon, 28 Dec 1992 16:23:44 GMT
- Message-ID: <Bzz9JL.JoH@fiu.edu>
- References: <1992Dec23.180219.25620@sci34hub.sci.com> <PCG.92Dec27232149@decb.aber.ac.uk> <1992Dec28.033404.11512@sci34hub.sci.com>
- Sender: news@fiu.edu (Usenet Administrator)
- Lines: 11
-
- I am posing this question for Novell Gurus for a friend:
- system: 386sx, IDE western digital 212 Meg, VGA card to set for Mono.
- 1 3.5 1.44 and 1 5.25 1.2 floppies. After setting parameters for initiali
- setup like wd adapter 8 bit driver and chanell 0 info: ISA disk,primary, and
- INterrupt 14 and after inserting disketts:system1,2,osexe,osobj,drivers for
- many times system abends with :
- Improper ROM parameter table for disk controller". He could not find any info
- on this abend in Network books. Any suggestions. The mother board is 386sx,
- 16 Mhz, with Quadtel bios 1990. The pc works fine in DOS mode. It has 5 Meg
- Ram memory. Thanks in advance for any help/suggestions/recommendation.
-
-