home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.ibm.pc:1040 comp.sys.ibm.pc.misc:16098 comp.sys.ibm.pc.hardware:34021
- Newsgroups: comp.sys.ibm.pc,comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware
- Path: sparky!uunet!gatech!concert!samba!usenet
- From: Mike.Chang@launchpad.unc.edu (Mike Chang)
- Subject: Re: Request information for Maxitor 7080AT, 7213AT
- Message-ID: <1992Dec23.020307.11722@samba.oit.unc.edu>
- Sender: usenet@samba.oit.unc.edu
- Nntp-Posting-Host: lambada.oit.unc.edu
- Organization: University of North Carolina Extended Bulletin Board Service
- References: <1992Dec23.015858.11448@samba.oit.unc.edu>
- Date: Wed, 23 Dec 1992 02:03:07 GMT
- Lines: 18
-
- >I recently bought two used maxitor drives without documents. I was
- >wondering if anyone can find the parameters for Maxitor 7080AT and
- >7212AT (cylinder,head,sector number,etc). I also would like know
- ------
- >what the jumper settings are for master,slave and single drive
- >configurations. Thanks much.
- >
- >Happy holiday.
-
-
- Oops, I meant 7213AT drive.
-
- --Mike
- --
- The opinions expressed are not necessarily those of the University of
- North Carolina at Chapel Hill, the Campus Office for Information
- Technology, or the Experimental Bulletin Board Service.
- internet: laUNChpad.unc.edu or 152.2.22.80
-