home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!elroy.jpl.nasa.gov!swrinde!zaphod.mps.ohio-state.edu!uwm.edu!ogicse!news.u.washington.edu!milton.u.washington.edu!pollock
- From: pollock@milton.u.washington.edu (Joe Pollock)
- Newsgroups: comp.sys.att
- Subject: Re: Adding 2nd 360K floppy to an AT&T 6300
- Message-ID: <1hpvtvINNsat@shelley.u.washington.edu>
- Date: 29 Dec 92 16:55:27 GMT
- Article-I.D.: shelley.1hpvtvINNsat
- References: <1992Dec24.223819.11987@cbnewsl.cb.att.com> <1hnh3jINNbm4@shelley.u.washington.edu> <1992Dec28.203932.15988@Firewall.Nielsen.Com>
- Distribution: usa
- Organization: University of Washington, Seattle
- Lines: 21
- NNTP-Posting-Host: milton.u.washington.edu
-
- In article <1992Dec28.203932.15988@Firewall.Nielsen.Com> kstox@admips2.Berkeley.EDU (Ken Stox) writes:
- >
- >If memory serves correct, This was documented, but was not correct. Later
- >versions of the firmware used the switches differently. Sorry that I can't
- >rememeber the details, but it has been 6 years since I owned one of these
- >babies.
- >
- >--
- >===============================================================================
- >Ken Stox Consultant to A.C. Nielsen kstox@naitc.com
-
- I checked this aspect - although there are differences in how rev. 1.21 and
- rev. 1.43 firmware use the switches, the above settings are valid for both
- versions (according to my service manual).
-
- I considered typing in the entire matrix for both firmware versions, but it
- was about four pages of text, including notes :-)
-
- Is there a FAQ for the 6300?
-
- joe
-