home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.amiga.tech:194 comp.sys.amiga.hardware:22198 comp.sys.amiga:343
- Path: sparky!uunet!paladin.american.edu!gatech!rpi!usc!news.aero.org!foy
- From: foy@aero.org (Richard Foy)
- Newsgroups: comp.sys.amiga.tech,comp.sys.amiga.hardware,comp.sys.amiga
- Subject: Can I recover read protected files.
- Date: 30 Dec 1992 15:03:55 GMT
- Organization: The Aerospace Corporation, El Segundo, CA
- Lines: 22
- Message-ID: <1hsdorINNnlh@news.aero.org>
- NNTP-Posting-Host: aerospace.aero.org
-
- I have an A2000 with a Ricoh removable media 50meg drive named RH2:
- a standard hard drive, accelerator board etc.
-
- I goofed and and now have the system come up with a message "RH2: has a
- checksum error on block 2572." If I cancel the error message the icons
- appear and I can read the files that were on the disk before I caused
- the error. However there was a large group of files that I had unset all
- of the protection bits. I would like to be able to recover those files.
- When I send a command to set any of those files to read I get the system
- message "Rh2: is not validated."
-
- Does any one have suggestions for what I might try to do in order to
- recover those read protected files?
-
- Thank you for any help?
-
- Richard Foy (foy@aero.org)
-
-
-
-
-
-