home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!spool.mu.edu!sol.ctr.columbia.edu!zarthac
- From: zarthac@bradley.edu (Matthew Simmons)
- Subject: Re: A1200 Technical question
- References: <10361@cbmger.de.so.commodore.com>
- Sender: nobody@ctr.columbia.edu
- Organization: J. Random Misconfigured Site
- Date: Fri, 1 Jan 1993 08:01:41 GMT
- X-Newsreader: TIN [version 1.1 PL8]
- Message-ID: <1993Jan1.080141.28390@sol.ctr.columbia.edu>
- X-Posted-From: cs1.bradley.edu
- NNTP-Posting-Host: sol.ctr.columbia.edu
- Lines: 21
-
- Dr Peter Kittel Germany (peterk@cbmger.de.so.commodore.com) wrote:
- : In article <1992Dec29.175902.7596@magnus.acs.ohio-state.edu> dcantrel@magnus.acs.ohio-state.edu (Daniel T Cantrell) writes:
- : >I was hoping someone could answer a question I have about the inside
- : >of an A1200. I know the 44 pin connector on the motherboard is an
- : >IDE interface with the standard 4 power pins built in. What I am
- : >not sure of is what the 40 pin connector sitting next to the DOS
- : >ROMs.
-
- : They were intended to upgrade a 1 MB Chip RAM machine to 2 MB Chip RAM.
- : But as it now turns out that probably all future A1200's will come
- : already with 2 MB on board, these connectors will perhaps vanish some
- : day. - As far as I know, you can also connect an RTC (clock chip) there.
-
- : --
- : Best regards, Dr. Peter Kittel // E-Mail to \\ Only my personal opinions...
- : Commodore Frankfurt, Germany \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk
- : Wer's nicht kann, soll's bleiben klopfen oder Steine lassen!
- Is there any way at all I can either use my 500rx (which I have pumped 4 meg
- into) as a whole or at the very least, just the chips in the 1200? Nobody
- wants to buy the 500rx for anything near a reasonable price...
-
-