home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!rutgers!cbmvax!grr
- From: grr@cbmvax.commodore.com (George Robbins)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: C=2232 multiser @ >>19.2Kbps??!!
- Message-ID: <38141@cbmvax.commodore.com>
- Date: 25 Dec 92 22:04:50 GMT
- References: <1992Dec24.133121.968@miavx3.mid.muohio.edu>
- Reply-To: grr@cbmvax.commodore.com (George Robbins)
- Organization: Commodore, West Chester, PA
- Lines: 27
-
- In article <1992Dec24.133121.968@miavx3.mid.muohio.edu> mchandy@miavx3.mid.muohio.edu writes:
- > I am using a C=2232 multi-serial card in my C=2500 for running a BBS.
- > Apparently the fastest speed the serial.device driver for the 2232 is
- > 19.2Kbps. I would like to run it at either 38.4Kbps or 57.6Kbps.
- >
- > I have tried actually setting the serial port config of my BBS software at
- > these higher speeds, but this seems only to affect the CTS/RTS flow control,
- > not the actual DTE to DCE rate, which remains at 19.2Kbps (not the higher rate
- > it is set at).
- >
- > I need to get the 2232 running at higher speeds so I can speed up xfers and
- > free up some of the CPU time required to wait for the serial port to free up.
- >
- > If anyone knows what I can do to get the C=2232 operating at speeds higher than
- > 19.2Kbps, please let me know!!!
-
- Just change the osciallator that determines the baud rates to one of
- 2X or 4X the frequency and all the speeds will scale accordingly.
-
- Plese not that this does not represent a claim that the board will
- be able to support all ports at > 19.2K baud, but you can try it if
- you want to.
-
- --
- George Robbins - now working for, work: to be avoided at all costs...
- but no way officially representing: uucp: {uunet|pyramid|rutgers}!cbmvax!grr
- Commodore, Engineering Department domain: grr@cbmvax.commodore.com
-