home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!crdgw1!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!cbnewsc!cbfsb!cbnewsb.cb.att.com!dvc
- From: dvc@eagle.hr.att.com (David Van Cleef)
- Newsgroups: comp.sys.3b1
- Subject: Re: Expansion box info needed
- Message-ID: <DVC.92Dec30112539@eagle.ATT.COM>
- Date: 30 Dec 92 16:25:39 GMT
- References: <1992Dec28.045136.5170@ultb.isc.rit.edu>
- <1992Dec29.130554.3446@cbnews.cb.att.com>
- <1992Dec29.202555.8913@sonyd1.Broadcast.Sony.COM>
- <72605@cup.portal.com>
- Sender: news@cbfsb.cb.att.com
- Organization: AT&T Bell Laboratories
- Lines: 14
- In-Reply-To: thad@cup.portal.com's message of 30 Dec 92 06:31:01 GMT
- Originator: news@cbnewsb.cb.att.com
- Nntp-Posting-Host: eagle.hr.att.com
-
- >>>>> On 30 Dec 92 06:31:01 GMT, thad@cup.portal.com (Thad P Floryan) said:
-
- TPF> The ONLY cards that don't work in the expansion chassis are:
-
- TPF> RAM expansion
- TPF> EIA/RAM combo (with OR without RAM)
-
- Does this even extend to those 0.5MB RAM boards that have been
- hardware hacked (using the procedure in the HWNotes) to reside in
- the "4th" slot?
- --
- David A. Van Cleef AT&T Bell Laboratories
- internet: dvc@eagle.hr.att.com Red Hill Facility, Middletown, NJ
- +1 908 615 4906
-