home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.misc
- Path: sparky!uunet!paladin.american.edu!gatech!usenet.ins.cwru.edu!agate!netsys!pagesat!spssig.spss.com!uchinews!ellis!sip1
- From: sip1@ellis.uchicago.edu (Timothy F. Sipples)
- Subject: Re: IDE & Future Domain SCSI II controller in OS/2 2.0?
- Message-ID: <1993Jan2.183750.21477@midway.uchicago.edu>
- Sender: news@uchinews.uchicago.edu (News System)
- Reply-To: sip1@midway.uchicago.edu
- Organization: Dept. of Econ., Univ. of Chicago
- References: <1993Jan1.081822.25449@krk.fi>
- Date: Sat, 2 Jan 1993 18:37:50 GMT
- Lines: 21
-
- In article <1993Jan1.081822.25449@krk.fi> malinen@krk.fi (Mikko Malinen) writes:
- >i'd like to know how Future Domain SCSI II controller behaves in OS/2 2.0
- >with IDE drives. Is there any problems i may encounter in installing Future
- >Domain controller in machine for tape drive beside my IDE drives.
- > My hardware follows:
- >486/33 mhz ISA PC (OPTi Chipset with AMI 07/07/91 bios)
- >Boca XVGA SuperVGA adapter
- >8 mb memory
- >Western Digital Piranha WD4200 (210 mb), and ST1239A (210 mb) both IDE drives.
- >OS/2 2.0.1 (UK), DOS 5.0
-
- No problems. Future Domain adapters are natively supported by OS/2.
- Just make sure you have the appropriate BASEDEV lines in your
- CONFIG.SYS (per the instructions in the README file), and you should
- be fine.
-
- --
- Timothy F. Sipples | Read the OS/2 FAQ List 2.0h, available from
- sip1@ellis.uchicago.edu | 128.123.35.151, anonymous ftp, in /pub/os2/all/info
- Dept. of Econ., Univ. | /faq, or from LISTSERV@BLEKUL11.BITNET (send "HELP")
- of Chicago, 60637 | [Read the List, THEN post to ONE OS/2 newsgroup.]
-