home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!moe.ksu.ksu.edu!kuhub.cc.ukans.edu!spssig.spss.com!uchinews!ellis!sip1
- Newsgroups: comp.os.os2.misc
- Subject: Re: 2 * IDE + SCSI under OS/2 2.0
- Message-ID: <1993Jan1.190805.15655@midway.uchicago.edu>
- From: sip1@ellis.uchicago.edu (Timothy F. Sipples)
- Date: Fri, 1 Jan 1993 19:08:05 GMT
- Reply-To: sip1@midway.uchicago.edu
- Sender: news@uchinews.uchicago.edu (News System)
- References: <1992Dec19.215353.15499@scorch.apana.org.au>
- Organization: Dept. of Econ., Univ. of Chicago
- Lines: 23
-
- In article <1992Dec19.215353.15499@scorch.apana.org.au> lukpla@scorch.apana.org.au (Luke Plaizier) writes:
- > I am having this strange trouble with OS/2 with a new
- >installation. The site consists of a small 386 with both bios
- >supported drives occupied by an IDE pair. An adaptec 1510 -
- >non boot bios and no fdd support - is used to run the main 300m SCSI
- >drive.
- > Trouble is, the OS/2 installation didn't pick the SCSI
- >card or drives on installation or in final operation.
- > Is this due to the fact that both bios drives are
- >occupied, or is something wrong with the OS/2 AHA152X.ADD
- >device driver????
-
- The installation program may simply have been unable to detect the
- Adaptec 1510. You can add the necessary drivers manually to your
- CONFIG.SYS if you wish. Get ahold of the latest Adaptec drivers
- (available via anonymous ftp from ftp-os2.nmsu.edu -- check the file
- /pub/os2/00Index for location), then follow the instructions included.
-
- --
- Timothy F. Sipples | Read the OS/2 FAQ List 2.0h, available from
- sip1@ellis.uchicago.edu | 128.123.35.151, anonymous ftp, in /pub/os2/all/info
- Dept. of Econ., Univ. | /faq, or from LISTSERV@BLEKUL11.BITNET (send "HELP")
- of Chicago, 60637 | [Read the List, THEN post to ONE OS/2 newsgroup.]
-