home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.misc
- Path: sparky!uunet!cs.utexas.edu!asuvax!ennews!telesys!weyrich!orville
- From: orville%weyrich@uunet.uu.net (Orville R. Weyrich)
- Subject: Re: HELP: co-install OS/2, UNIX, MSDOS ?
- Message-ID: <1992Dec31.134621.8340@weyrich.UUCP>
- Sender: orville@weyrich.UUCP (Orville R. Weyrich)
- Reply-To: uunet.uu.net!weyrich!orville
- Organization: Weyrich Computer Consulting
- References: <1992Dec20.052045.4277@elektro.cmhnet.org>
- Date: Thu, 31 Dec 92 13:46:21 GMT
- Lines: 24
-
- In article <1992Dec20.052045.4277@elektro.cmhnet.org> charlie@elektro.cmhnet.org (Charlie Smith) writes:
- > P3 OS/2 90 MB Primary partition (now)
- >After re-flagging P2 as the active partition, I found that the Interactive
- >UNIX "boot manager" will let me choose between UNIX and OS/2 just fine,
- >BUT: as soon as I recreate the P1 partition as a MSDOS primary partition,
- >OS/2 refuses to boot; actually, it does boot and then about 5 seconds later
- >it craps out with a TRAP 00D code and dumps the registers. It doesn't do
- >this if the OS/2 partition is the only primary partition.
- >
- I had similar symptoms trying to get OS/2 to work with an AHA-1542B controller
- and a Maxtor 1.5 GB SCSI drive -- my problems were removed by installing the
- CSD a.k.a. service pack. If you haven't tried the service pack, you might
- give it a try.
-
-
-
- orville
-
- -------------------------------------- ******************************
- Orville R. Weyrich, Jr. Weyrich Computer Consulting
- Certified Data Processor POB 5782, Scottsdale, AZ 85261
- Certified Systems Professional Voice: (602) 391-0821
- Internet: orville%weyrich@uunet.uu.net Fax: (602) 661-0660
- -------------------------------------- ******************************
-