home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!utcsri!utgpu!attcan!ncrcan!cattnts!lsimages!whome!camaro!tfoley
- From: tfoley@camaro.uucp (Tim Foley)
- Newsgroups: comp.os.linux
- Subject: Re: throughput...never did get an answer : )
- Message-ID: <1993Jan2.131812.11328@camaro.uucp>
- Date: 2 Jan 93 13:18:12 GMT
- References: <marcf.725768903@yorku.ca>
- Organization: camaro
- Lines: 36
-
- In article <marcf.725768903@yorku.ca> marcf@nexus.yorku.ca (Marc G Fournier) writes:
- >Hi...
- >
- > What is the max that I can hope to run uugetty at for a
- >modem?
- >
- > I tried 9600 for a hard-wired connection and got significant
- >character lose...how will a modem handle it?
- >
-
- Hmm, do you have CTSRTS enabled and a full cable to support it? I had
- problems at the start with my modem, but I switch to a nice full 25 pin
- ribbon cable and now I have my uugetty baud rate locked at 19200, I did have
- it a t 38400, but brought it down.
-
- Also, I have a VT220 on the other serial port running at 19200 as well,
- with no problems, and a long cable, but it also has almost all of the pins.
-
- Give that a check out and see if that fixes it up. Make sure you turn on
- CTSRTS for the modem...I think your running a world blazer right? SO I
- guess your used to fussying with settings. I've got an HST, I just love
- extra registers.....Arghhhh. ;)
-
- Take Care
-
- Tim
-
-
-
- --
- --------------------------------------------------------------------------
- The HeartBeat of America...Yesterdays Camaro Z28
- tfoley@camaro.uucp
- Call the Camaro Linux Pub-access site: 1-416-238-6550 USRobotics HST
- Note: Please, no ftpmail or mailing lists or the host gets annoyed :)
- --------------------------------------------------------------------------
-