home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!gatech!emory!wupost!waikato.ac.nz!comp.vuw.ac.nz!newshost.wcc.govt.nz!newshost.wcc.govt.nz!not-for-mail
- Newsgroups: comp.os.linux
- Subject: Re: 0.99 pl 0/1 fine, but breaks xdm -nodaemon
- Message-ID: <1hb367INN7fr@golem.wcc.govt.nz>
- From: hamilton@golem.wcc.govt.nz (Michael Hamilton)
- Date: 24 Dec 1992 14:19:03 +1300
- References: <1h8rtsINNkir@golem.wcc.govt.nz>
- Organization: Wellington City Council, Wellington, NZ
- Keywords: kernel linux 0.99
- NNTP-Posting-Host: golem.wcc.govt.nz
- Lines: 38
-
-
- 0.99 patch level 1 seems to work fine on the following two
- configurations, appart from the xdm problems I reported in a earlier
- posting. Good work.
-
- Make: MiTAC
- Model: 4280G
- Processor: 486DX 33 MHz (Unknown amount of cache)
- Bus: EISA
- Memory: 8MB
- BIOS: Phoenix Technologies 1.0 4280 R1.03
- HD: 202 MB Formatted (Conner of some kind)
- Video card: PVGA 512K
- HD/FD cntrllr: SCSI Adaptec AHA-154XB
- Monitor: MiTAC M1420-02N
- Eithernet: Western Digital EtherCard PLUS V2.1 8013EP
- Misc: COM1 - Logitech mouse.
-
-
- Make: Hewlett Packard
- Model: HP QS20
- Processor: 386DX 20 MHz
- Memory: 8MB
- BIOS: Phoenix Technologies V D.02.05 QS/20
- HD: Quantum Prodrive LPS 240 AT IDE
- Video card: InformTech (ie noname) Tseng ET4000 HiColor 1MB
- HD/FD cntrllr: HP Multi-function card
- Monitor: Philips 7 CM 3209
- Misc: COM1 - CASE Quattro 2400 buad modem (noname serial card)
- COM2 - mouse (Quickshot QS-159) (noname serial card)
- COM3 - vt320 terminal (IRQ 10 from HP multi-function card)
- Colorado Jumbo 120 tape unit (backup via tar to DOS)
-
-
- --
- Michael Hamilton, Computer Services Section, Wellington City Council, P.O. Box
- 2199, Wellington, New Zealand. Phone: (64) (4)801-3300 FAX: (64) (4)801-3020
- Domain: hamilton@csc.wcc.govt.nz PSImail: PSI%0530147000090::HAMILTON
-