home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dsp
- Path: sparky!uunet!email!efads1.tuwien.ac.at!helmut
- From: helmut@efads1.tuwien.ac.at (Helmut Gander)
- Subject: Re: IO cards for the Motorola DSP96000 ADS (available?)
- Message-ID: <1992Dec23.111407.4461@email.tuwien.ac.at>
- Sender: news@email.tuwien.ac.at
- Nntp-Posting-Host: efads1.tuwien.ac.at
- Reply-To: helmut@efads1.tuwien.ac.at (Helmut Gander)
- Organization: INFA
- References: <1fjgtjINN7nt@agate.berkeley.edu>
- Date: Wed, 23 Dec 1992 11:14:07 GMT
- Lines: 38
-
- In article <1fjgtjINN7nt@agate.berkeley.edu>,
- sriram@doppler.berkeley.edu (S. Sriram) writes:
- |>Hi there,
- |>
- |>I was wondering if there are any add-on IO interface cards
- |>available for the Motorola DSP96000ADS ( application
- |>development system for the DSP96K). I am interested in
- |>A/D,D/A cards, serial interfaces and such.
- |>
- |>Thanks,
- |>Sriram.
- |>
- We are developing hardware that can be used together with the
- 96000ADSA.
- Using a backplane for the edge connector (96) the modules can be used
- all together.
- We are using and developing the following modules:
-
- ADC/Board with 2 channels, both with 16 Bit and 166kS/s.
- TimerBoard with three timers for IRQA/B/C, fully programmable.
- Digital I/O, each 32Bit wide, LEDs for current status.
- Incremental interface (especially for angular encoders) with count up
- and down (up to about 17Mhz)
- Fully programmable square wave generator.
-
- Additional cards will also be developed.
- Bye
- Dipl.-Ing. Gander Helmut
- Vienna University of Technology
- Institute of Flexible Automation
- Group RobTec
- Gusshausstr. 27-29/361
- A-1040 Vienna
- Austria
- EUROPE
- hg@flexaut.tuwien.ac.at
- helmut@efasp1.tuwien.ac.at
- helmut@efasp2.tuwien.ac.at
-