home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!news.acns.nwu.edu!telecom-request
- Date: 31 Dec 92 01:40:04 MST
- From: petrisko@evax2.engr.arizona.edu (William Petrisko)
- Newsgroups: comp.dcom.telecom
- Subject: Panasonic KXT-123211 Software
- Reply-To: petrisko@evax2.engr.arizona.edu
- Message-ID: <telecom12.927.8@eecs.nwu.edu>
- Organization: University of Arizona, College of Engineering and Mines, Tucson
- Sender: Telecom@eecs.nwu.edu
- Approved: Telecom@eecs.nwu.edu
- X-Submissions-To: telecom@eecs.nwu.edu
- X-Administrivia-To: telecom-request@eecs.nwu.edu
- X-Telecom-Digest: Volume 12, Issue 927, Message 8 of 14
- Lines: 25
-
- We recently purchased a Panasonic KXT-1232-11D hybrid key telephone
- system. One feature that attracted us to it was the availablity to
- program it over the RS-232 port. This, however, leaves A LOT to be
- desired ... infact, it seems it is actually easier to program from a
- display set, because it actually tells you what you are programming
- instead of having to use the program book to reference the cryptic
- codes. Does anyone know of PC software available as a front-end to
- programming the Panasonic phone system?
-
- Also (just an annoyance factor) when dialing, it seems that the
- touchtone echo is *delayed* until you get to the third or fourth
- digit. So one starts dialing (moderately fast paced) and about the
- fourth digit in, digits one to four quickly echo back, which really
- throws you off if you are used to hearing ONE digit echoed IMMEDIATELY
- after each button pressed. Anyone have a clue about this? (ie: is
- there a programming feature OR something that will either fix/turn it
- off?)
-
-
- Thanks,
-
- bill petrisko petrisko@evax2.engr.arizona.edu
- aka n7lwo ...!uunet!4gen!warlok!gargle!omnisec!thumper!bill
-
-