home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: sparky!uunet!spool.mu.edu!yale.edu!yale!actcnews!sun1x!scottb
- From: scottb@sun1x.actc.res.utc.com (TheLrdLovsAHngn)
- Subject: sportster 14.4/16.8 adventures
- Message-ID: <1992Dec31.210531.14912@sun1x.actc.res.utc.com>
- Organization: United Technologies Research Center
- Date: Thu, 31 Dec 1992 21:05:31 GMT
- Lines: 26
-
- Hi all,
-
- since last posting/asking about the sportster and hst 16.8 modem settings,
- my friend and I have made a few discoveries.
- Discovery #1:
-
- if you type atgw03c6,22gw05cb,2f &h1 &r2 &b1 - you and up with
- USR Courier v.32bis settings (type ati4 to see this)
-
- if you type atgw03c6,22gw05cd,2f &h1 &r2 &b1 - you end up with
- USR 16.8 HST settings ^Note: this is a D, this is the only difference
- from the first line.
-
- Then upon dialing into a 16.8 bbs, I was able to get a cps thru-put of
- 1875 chars. Probably couldve gotten a little higher, but transfer finished.
-
- The downfall of all this is, my friend who has the sportster 14.4 (with 4.1
- rom) and I cannout successfully connect at 16.8 (with above settings). It
- would seem that you need to have a real 16.8 HST on one end of the connection.
- Of course I could be wrong, so if anyone can duplicate/prove/disprove my
- findings, please post here for all to see.
- --
- Disclaimer: I didn't do it! Nobody saw me do it! You can't prove anything!
- My opinions are my own. They do not reflect anyone/thing else!
- \/ preferred \/
- scottb%nw8550@utrcgw.utc.com | sdb@rcinet.utc.com
-