home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.dcom.modems:18526 comp.sys.next.sysadmin:7215
- Newsgroups: comp.dcom.modems,comp.sys.next.sysadmin
- Path: sparky!uunet!spool.mu.edu!yale.edu!ira.uka.de!smurf.sub.org!flatlin!pilhuhn!nextone!nitezki
- From: Nitezki@NiDat.sub.org (Peter Nitezki)
- Subject: NXFax-Manager and PBX: Problem with dialtone
- Message-ID: <1992Dec26.143618.5120@nidat.sub.org>
- Keywords: faxmodem, PBX dialtone
- Sender: nitezki@nidat.sub.org
- Organization: Nitezki Datensysteme, Kraichtal, Germany
- Date: Sat, 26 Dec 1992 14:36:18 GMT
- Lines: 18
-
- I use a ZyXEL U-1496E on a NeXTstation NeXTstep R3.0 and was sofar
- successful in connecting to a PBX with distinctive dialtone for UUCP by
- inserting an <ATX3> sequence in the config-file and prepending a <0W>
- seqence to the designated phone nunber.
-
- Now I would need to do the same to the setup of NXFaxMonitor (or somewhere
- else in the faxmodem setup)!
-
- Do I need to create a local profile on my modem and modify the UUCP config
- to reset to this profile?
-
- How can I get the <0W> sequence prepended to the fax number (inset on the
- panel? insert into the adress book?)
- --
- Peter Nitezki | Nitezki@NiDat.sub.org # Blessed thou who knoweth
- NITEZKI DATENSYSTEME | Tel.: +49 7251 62495 # not about the pleasure and
- Staarenbergstr. 44 | Fax : +49 7251 69215 # delight of being hooked
- D-7527 Kraichtal 2 | GERMANY # up to the Net. Peter 1,3-5
-