home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!olivea!spool.mu.edu!wupost!csus.edu!netcom.com!gerg
- From: gerg@netcom.com (Greg Andrews)
- Newsgroups: comp.dcom.modems
- Subject: Re: Worldblazer not autobauding correctly at 38400
- Message-ID: <1992Dec24.005047.7811@netcom.com>
- Date: 24 Dec 92 00:50:47 GMT
- References: <1992Dec19.091753.18781@netcom.com> <1992Dec19.104747.8823@clarinet.com> <BzIvEF.E9@wsrcc.com>
- Organization: Netcom Online Communications Services (408-241-9760 login: guest)
- Lines: 27
-
- wolfgang@wsrcc.com (Wolfgang S. Rupprecht) writes:
- >brad@clarinet.com (Brad Templeton) writes:
- >>Sorry for making you type such a long message, but I of course have the
- >>modem set in &D3 mode, and have always set my modems that way for years.
- >>I can't imagine setting a modem any other way and feeling safe.
- >>And yes, DTR is definitely dropping, for a full second, before the new
- >>getty takes over, and then, as far as I know, nobody is talking to the
- >>modem before the call comes in.
- >
- >On a TB+ I noticed reset problems with exactly the same setup. I
- >wonder how much of the TB code the WB inherited.
- >
-
- Very little. The code environment is completely different in the
- T1600/T3000/WorldBlazer modems. Large chunks were ported over, but
- it still amounted to virtually a re-write to fit the old code into
- the new environment. Evidence: The TB+ never had the well-known
- UUCP protocol startup failure problem.
-
- What firmware is in your TB+?
-
- -Greg
- --
- ::::::::::::::::::: Greg Andrews gerg@netcom.com :::::::::::::::::::
- ObGuindon: The Carp Diet. You place a carp in your refrigerator
- and it takes away your appetite.
- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-