home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!zaphod.mps.ohio-state.edu!swrinde!emory!uumind!willard!dawson
- From: dawson@willard.UUCP (Willard Dawson)
- Newsgroups: comp.bbs.waffle
- Subject: Re: uucico G protocol patch
- Message-ID: <FPJNwB2w165w@willard.UUCP>
- Date: Thu, 31 Dec 92 10:04:02 EST
- References: <3qcHwB1w165w@patsbbs.UUCP>
- Organization: Willard's House BBS, Atlanta, GA -- +1 (404) 664 8814
- Lines: 189
-
- pat%patsbbs@frcs.alt.za writes:
-
- > Help!
- >
- > I saw a reference in this newsgroup to a patch for uucico to
- > allow it to support the 'G' protocol as an alternative to 'g'.
- > Can someone please point me to where that I can get details
- > of this patch!
- >
- > Many thanks in anticipation
- >
- > /_/_/ Talk to the world ! Internet: pat%patsbbs@frcs.alt.za
- > / /!/ ! FidoNet : Pat Verner at 5:7101/36
- > ! Pat Verner ZS6BZJ ! X.400: G=Pat,S=Verner,A=Beltel,C=ZA,O=Private Bo
- > ! Pretoria, RSA ! Packet : ZS6BZJ @ ZR6ADO.TVL.ZAF.AF
- >
-
- I tried to reply via email, but got this ricochet bounce error message.
- I also tried to reply to your x.400 account, but you didn't provide any PRMD
- info, so I don't think you'll get that, either.
-
- From vdbsan!gatech!widener!m2xenix.psg.com!MAILER-DAEMON Thu Dec 31 06:53:14 1992 remote from willard
- Received: by willard.UUCP (1.65/waf)
- via UUCP; Thu, 31 Dec 92 06:59:40 EST
- for dawson
- Received: by vdbsan (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7OSf-0002gjC@vdbsan>; Thu, 31 Dec 92 06:53 EST
- Received: from gatech.UUCP by gatech.UUCP (4.1/SMI-4.1)
- id AA02235; Thu, 31 Dec 92 02:33:35 EST
- From: vdbsan!gatech!widener!m2xenix.psg.com!MAILER-DAEMON
- Received: from widener.UUCP by gatech.edu (4.1/Gatech-9.1)
- id AA20218 for vdbsan!willard!dawson; Thu, 31 Dec 92 02:25:47 EST
- Received: from heifetz.UUCP by cs.widener.edu with UUCP id AA00198
- (5.65c/Widener-4.2 for gatech!vdbsan!willard!dawson); Thu, 31 Dec 1992 02:23:15 -0500
- Received: by heifetz.msen.com (/\==/\ Smail3.1.22.1 #22.11)
- id <m0n7JMA-000HcaC@heifetz.msen.com>; Thu, 31 Dec 92 01:26 EST
- Received: from uunet.UUCP by destroyer.rs.itd.umich.edu (5.65/2.2)
- id AA23667; Thu, 31 Dec 92 01:19:58 -0500
- Received: from m2xenix.psg.com by relay2.UU.NET with SMTP
- (5.61/UUNET-internet-primary) id AA07305; Thu, 31 Dec 92 01:16:17 -0500
- Received: by m2xenix.psg.com (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7JBP-0009miC@m2xenix.psg.com>; Wed, 30 Dec 92 22:15 PST
- Message-Id: <m0n7JBP-0009miC@m2xenix.psg.com>
- Date: Wed, 30 Dec 92 22:15 PST
- To: gatech!vdbsan!willard!dawson
- Subject: mail failed, returning to sender
- Reference: <m0n7JBL-0009mbC@m2xenix.psg.com>
-
- |------------------------- Failed addresses follow: ---------------------|
- <frcs!pat@m2xenix.psg.com> ... loop detection: maximum hop count exceeded
- |------------------------- Message text follows: ------------------------|
- Received: by m2xenix.psg.com (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7JBL-0009mbC@m2xenix.psg.com>; Wed, 30 Dec 92 22:14 PST
- Received: from m2xenix.psg.com by relay1.UU.NET with SMTP
- (5.61/UUNET-internet-primary) id AA12652; Thu, 31 Dec 92 01:14:54 -0500
- Received: by m2xenix.psg.com (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7JBE-0009mbC@m2xenix.psg.com>; Wed, 30 Dec 92 22:14 PST
- Received: from m2xenix.psg.com by relay1.UU.NET with SMTP
- (5.61/UUNET-internet-primary) id AA12648; Thu, 31 Dec 92 01:14:46 -0500
- Received: by m2xenix.psg.com (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7JB7-0009mbC@m2xenix.psg.com>; Wed, 30 Dec 92 22:14 PST
- Received: from m2xenix.psg.com by relay1.UU.NET with SMTP
- (5.61/UUNET-internet-primary) id AA12639; Thu, 31 Dec 92 01:14:40 -0500
- Received: by m2xenix.psg.com (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7JB0-0009mbC@m2xenix.psg.com>; Wed, 30 Dec 92 22:14 PST
- Received: from m2xenix.psg.com by relay1.UU.NET with SMTP
- (5.61/UUNET-internet-primary) id AA12634; Thu, 31 Dec 92 01:14:34 -0500
- Received: by m2xenix.psg.com (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7JAr-0009mbC@m2xenix.psg.com>; Wed, 30 Dec 92 22:14 PST
- Received: from m2xenix.psg.com by relay1.UU.NET with SMTP
- (5.61/UUNET-internet-primary) id AA12630; Thu, 31 Dec 92 01:14:24 -0500
- Received: by m2xenix.psg.com (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7JAi-0009mbC@m2xenix.psg.com>; Wed, 30 Dec 92 22:14 PST
- Received: from m2xenix.psg.com by relay1.UU.NET with SMTP
- (5.61/UUNET-internet-primary) id AA12621; Thu, 31 Dec 92 01:14:15 -0500
- Received: by m2xenix.psg.com (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7JAb-0009mbC@m2xenix.psg.com>; Wed, 30 Dec 92 22:14 PST
- Received: from uunet.uu.net (via LOCALHOST.UU.NET) by relay2.UU.NET with SMTP
- (5.61/UUNET-internet-primary) id AA07132; Thu, 31 Dec 92 01:14:10 -0500
- Received: from mailrus.UUCP by uunet.uu.net with UUCP/RMAIL
- (queueing-rmail) id 011313.1637; Thu, 31 Dec 1992 01:13:13 EST
- Received: from mailrus.cc.umich.edu by destroyer.rs.itd.umich.edu (5.65/2.2)
- id AA23622; Thu, 31 Dec 92 01:13:13 -0500
- Received: by mailrus.cc.umich.edu (5.65/1123-1.0)
- id AA28730; Thu, 31 Dec 92 01:12:58 -0500
- Received: from gatech.UUCP by gatech.edu (4.1/Gatech-9.1)
- id AA19543 for uunet!m2xenix!frcs!pat; Thu, 31 Dec 92 01:06:54 EST
- Received: from vdbsan.UUCP by gatech.UUCP (4.1/SMI-4.1)
- id AA00696; Thu, 31 Dec 92 01:03:15 EST
- Received: by vdbsan (/\==/\ Smail3.1.25.1 #25.4)
- id <m0n7IX9-00032MC@vdbsan>; Thu, 31 Dec 92 00:33 EST
- Received: by willard.UUCP (1.65/waf)
- via UUCP; Thu, 31 Dec 92 00:25:18 EST
- for pat%patsbbs@frcs.alt.za
- To: patsbbs!frcs.alt.za!pat@uunet.uu.net
- Subject: Re: uucico G protocol patch
- From: mailrus!gatech!willard!dawson@uunet.uu.net (Willard Dawson)
- Message-Id: <9usmwB4w165w@willard.UUCP>
- Date: Thu, 31 Dec 92 00:24:19 EST
- In-Reply-To: <3qcHwB1w165w@patsbbs.UUCP>
- Organization: Willard's House BBS, Atlanta, GA -- +1 (404) 664 8814
-
- pat%patsbbs@frcs.alt.za writes:
-
- > Help!
- >
- > I saw a reference in this newsgroup to a patch for uucico to
- > allow it to support the 'G' protocol as an alternative to 'g'.
- > Can someone please point me to where that I can get details
- > of this patch!
- >
- > Many thanks in anticipation
- >
- > /_/_/ Talk to the world ! Internet: pat%patsbbs@frcs.alt.za
- > / /!/ ! FidoNet : Pat Verner at 5:7101/36
- > ! Pat Verner ZS6BZJ ! X.400: G=Pat,S=Verner,A=Beltel,C=ZA,O=Private Bo
- > ! Pretoria, RSA ! Packet : ZS6BZJ @ ZR6ADO.TVL.ZAF.AF
- >
-
- I happened to keep the relevant post, just in case this sort of request
- should arise. Of course, the originator might also contact you...
-
- Path: willard!slammer!emory!sol.ctr.columbia.edu!usc!cs.utexas.edu!uunet!mcsun!Germany.EU.net!horga!joker!mack
- From: Jochen Erwied <mack@joker.wes.open.de>
- Newsgroups: comp.bbs.waffle
- Subject: Re: UUCICO SPEED
- Message-ID: <eq0iVB2w165w@joker.wes.open.de>
- Date: Wed, 09 Dec 92 22:04:37 CET
- References: <5HRgVB2w165w@willard.UUCP>
- Distribution: world
- Organization: Creative Chaos Computing - Mailbox: +49-281-52975 (22.00-08.00)
- Lines: 44
-
- dawson@willard.UUCP writes:
-
- > > In <Tq10uB9w165w@joker.wes.open.de> Jochen Erwied <mack@joker.wes.open.de>
- > >
- > > >I am using a patched UUCICO not reporting 'g' as supported protocol,
- > > >but 'G'. My host supports 'g'-protocol with a 7 window/64 byte packets
- >
- > He's obviously patched his UUCICO.EXE binary to report G rather than g.
- > You can't simply change your SYSTEMS file and expect it to work without
- > having support for the G protocol in the uucico executable. I had to do
- > something very similar to make the 1.64 RMAIL.EXE properly handle mail to
- > x.400 mail addresses.
- >
- > Perhaps Mike would be kind enough to share his method in patching the
- > UUCICO binary? That'd be very helpful; I'd love to give this a try with
- > a couple of my feeds. It shouldn't be all that difficult to arrive at
- > the correct bytes to change in the UUCICO.EXE file to make it work.. but
- > if Mike would share that info, we would not all have to arrive at the
- > same conclusion separately...
-
- Well - it was me who posted the article about patching uucico, so here's
- the way to do it:
-
- 1. Copy uucico.exe to uucicog.exe
- 2. Use a diskeditor supporting search-commands (Norton's DiskEdit works
- fine) to modify this file.
- 3. Search for the string 'U%c'.
- 4. Replace it with 'UG' and a nullbyte.
- 5. Save your changes.
- 6. Quit the editor
- 7. If using BNU (or any other FOSSIL), remember to set the buffers
- high enough to hold 7*512 bytes, otherwise results may not be as
- expected...
- 8. Try connecting to a site supporting 'G'-protocol with command-line
- option '-k 512' using the patched uucico.
-
- Good luck!
-
- -Jochen
-
- --
- Jochen Erwied - Asternweg 5 - D-W-4230 Wesel - Internet: mack@wes.open.de
- "Spass und Freude durch Musik, wir wollen's laut, das reisst uns mit.
- Denn Rockmusik ist nicht so leise, wie die ganze Schlagerschei**e" [Bonfire]
-
- --
- dawson@willard.UUCP (Willard Dawson)
- gatech!vdbsan!willard!dawson
- emory!uumind!willard!dawson
- Willard's House BBS, Atlanta, GA -- +1 (404) 664 8814
-
- --
- dawson@willard.UUCP (Willard Dawson)
- gatech!vdbsan!willard!dawson
- emory!uumind!willard!dawson
- Willard's House BBS, Atlanta, GA -- +1 (404) 664 8814
-