home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!sdd.hp.com!spool.mu.edu!dsinc!dsinc!not-for-mail
- From: syd@dsi.com (Syd Weinstein)
- Newsgroups: biz.comp.telebit
- Subject: Re: Extra IC in FAX Upgrade Kit
- Date: 26 Dec 1992 11:05:34 -0500
- Organization: Datacomp Systems, Inc., Huntingdon Valley, PA
- Lines: 21
- Distribution: na
- Message-ID: <1hhvseINNm1u@dsinc.dsi.com>
- References: <5769@gold.gvg.tek.com>
- Reply-To: syd@DSI.COM
- NNTP-Posting-Host: dsinc.dsi.com
-
- davew@gold.gvg.tek.com (David White) writes:
- >I received the FAX upgrade for my WorldBlazer yesterday and found that
- >in addition to the two EPROMs, there was a third chip labeled 12952-01
- >that was not mentioned anywhere in the upgrade instructions. Is this
- >supposed to be a replacement for the IC at U2 labeled 12544-01? I
- >would appreciate it if anyone could shed some light on this.
- Thats the feature pal.
-
- T3000, Worldblazers, T3000+Fax and Worldblazers+FAX all use the same
- E-PROM set of firmware. (Now that the older T3000 that couldn't
- do TurboPEP have been 'retired :-) ) Which features are enabled is
- controlled by that PAL.
-
- If you are unsure where it plugs in, Call telebit, they'll quickly
- tell you which position it is. (And I am surprised is not in the new
- upgrade instructions.
- --
- ========================================================================
- Sydney S. Weinstein, CDP, CCP Elm Coordinator - Current 2.4PL17
- Datacomp Systems, Inc. Projected 3.0 Release: ??? ?,1994
- syd@DSI.COM or dsinc!syd Voice: (215) 947-9900, FAX: (215) 938-0235
-