home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: atl.general
- Path: sparky!uunet!wupost!spool.mu.edu!nigel.msen.com!emory!wa4mei!ke4zv!gary
- From: gary@ke4zv.uucp (Gary Coffman)
- Subject: Re: Internal vs External Modems
- Message-ID: <1993Jan2.202428.1216@ke4zv.uucp>
- Reply-To: gary@ke4zv.UUCP (Gary Coffman)
- Organization: Destructive Testing Systems
- References: <1992Dec27.170850.20902@ke4zv.uucp> <0VZNwB5w165w@dithots.Gwinnett.COM>
- Date: Sat, 2 Jan 1993 20:24:28 GMT
- Lines: 49
-
- In article <0VZNwB5w165w@dithots.Gwinnett.COM> gwp@dithots.Gwinnett.COM (George W. Pogue) writes:
- >gary@ke4zv.uucp (Gary Coffman) writes:
- >
- >> In article <LVk0VB2w164w@amfent.Gwinnett.COM> amf@amfent.Gwinnett.COM (Andy F
- >>
- >> IMHO the most important reason to use an external modem is to
- >> protect your expensive computer investment from lightning. Speaking
- >> as one who has been bitten, I'll stick with an external modem and
- >> a fiber optic serial link to the computer.
- >>
- >> Gary
- >
- >If you use a surge/current protector with a grounding shield on your
- >telephones lines, would this help prevent such damage?
-
- A little in some cases. Primarily such line protectors can deal with
- small spikes and surges from lightning hits some distance away. They
- are of little value for near strikes or direct strikes on the phone
- lines.
-
- The worst situations are lightning strikes on the phone or power wires
- where the bolt attempts to exit your equipment by the other cable. IE
- enter on phone, exit on power line, or vice versa. This allows large
- damaging currents to pass through your computer. If you can break that
- path with a fiber optic link, you can prevent most damage to the computer.
-
- There is an alternative protective method that is effective, but often
- difficult to put into practice. That is the "ground window" approach.
- *Every* wire entering or exiting your equipment has to pass through a
- single confined area where it is securely grounded through heavy duty
- and quick acting suppressors. The window is then connected to a solid
- earth ground. This must be the *only* ground path in the system.
-
- Ground loops are the main source of destructive current paths in equipment.
- Preventing *all* of them is often unobvious. I used an ordinary 3 wire
- AC plug on my remote mounted UPS because it's required by the National
- Electrical Code. That created a ground loop that torched a Unix box,
- monitor, laser printer, and two modems when lightning came to visit.
- Only the Unix box was on the UPS with it's remote ground, all the other
- equipment was on interruptable power and third wire grounded to outlets
- in the computer room. The ground window was destroyed simply because
- I wanted the noisy UPS isolated from my work position.
-
- Gary
- --
- Gary Coffman KE4ZV | You make it, | gatech!wa4mei!ke4zv!gary
- Destructive Testing Systems | we break it. | uunet!rsiatl!ke4zv!gary
- 534 Shannon Way | Guaranteed! | emory!kd4nc!ke4zv!gary
- Lawrenceville, GA 30244 | | emory!ke4zv!gary@gatech.edu
-