home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky alt.msdos.programmer:3058 comp.os.msdos.programmer:11720 comp.sys.ibm.pc.programmer:716 comp.lang.c++:18599 comp.lang.c:19085
- Path: sparky!uunet!gatech!destroyer!cs.ubc.ca!mala.bc.ca!oneb!witt!rudy
- Newsgroups: alt.msdos.programmer,comp.os.msdos.programmer,comp.sys.ibm.pc.programmer,comp.lang.c++,comp.lang.c
- Subject: Re: Setting up serial ports
- Message-ID: <1992Dec31.173234.2212@witt.almanac.bc.ca>
- From: rudy@witt.almanac.bc.ca (Rudy Witt)
- Date: Thu, 31 Dec 1992 17:32:34 GMT
- References: <1992Dec30.200952.5153@panther.mot.com>
- Organization: Merit Technologies Ltd.
- Lines: 37
-
- In article <1992Dec30.200952.5153@panther.mot.com> ronf@panther3.panther.mot.com (Ron Feigen) writes:
- >Being my first post, I hope this is the appropriate newgroup.
- >
- >I am a Unix/C/Assembler type that finds himself in the position of having to
- >write/port an app. on an IBM PC. One of the functions needed is to establish
- >carrier on a modem. My problem? How do I setup the com?: port using 'C'.
- >Asking the user to use the DOS mode command would be sort of kludgy.
- >Can anybody give some leads? Books? Examples?
- >
- >Anyhelp would be greatly appreciated!!!!!!!!
- >
- >
- >Thanks in advance,
- >
- >
- >
- >
- >--
- >
- >>
- >Ron Feigen
- >ronf@panther.mot.com
-
-
- I found a great book called:
-
- Serial Communications in C and C++
- written by Mark Goodwin
- published by MIS:Press
-
-
- good luck!
- --
- Rudy Witt Internet: rudy@witt.almanac.bc.ca
- Merit Technologies Ltd. Voice: 604-245-4746
- Ladysmith, BC.
- ---------------------------------------------------------------------
-