home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: alt.folklore.science
- Path: sparky!uunet!spool.mu.edu!sdd.hp.com!hp-cv!hp-pcd!hpcvaac!billn
- From: billn@hpcvaac.cv.hp.com (bill nelson)
- Subject: Re: Hot Water flow mystery.
- Message-ID: <1992Dec26.114005.5217@hpcvaac.cv.hp.com>
- Organization: Hewlett-Packard Company, Corvallis, Oregon USA
- References: <1992Dec26.063359.13443@panix.com>
- Date: Sat, 26 Dec 1992 11:40:05 GMT
- Lines: 38
-
- dannyb@panix.com (Daniel Burstein) writes:
- : regarding the questions about why the hot water from the tap would at firs
- : flow quite rapidly, then reduce in intensity, while the cold water didn't...
- :
- : There are a number of things going on.
- :
- : 1) There may be different piping systems, particularly if the building has
- : undergone renovation. While steel pipes have very little pressure related
- : expansion (at least with thepressures normally encountered), plastic
- : piping will have somewhat more.
-
- In either one, the flow would increase as the pipes heated. This is not
- what is happening.
-
- : 2) There may be air in the system. This will definitely compress under
- : pressure, thus giving extra push when a valve is first opened.
-
- Why would this make any difference? The pressure remains the same, air
- or no air. Also, the change is not that rapid. No change occurs until
- the water coming out of the faucet starts to get hot.
-
- : 3) The water heater tank may have a bladder or similar expandable
- : container in it.
-
- No - they have no such thing. Pressure tanks on a well system have such
- a bladder. However, this is not the cause - once again, the change is
- not immediate.
-
- : 4) there may be an extra "booster" pump on the heated water line which
- : added a bit of pressure which gave an extra push when the water is first
- : turned on.
-
- Why? What would be the purpose? Also, no immediate change.
-
- Trust Occam's razor. It is a case of the washer in the faucet expanding as
- it heats - thus reducing the flow.
-
- Bill
-