home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!paladin.american.edu!darwin.sura.net!spool.mu.edu!agate!usenet.ins.cwru.edu!cleveland.Freenet.Edu!as346
- From: as346@cleveland.Freenet.Edu (Bob Mayerovitch)
- Newsgroups: alt.cd-rom
- Subject: Re: Help wanted -- NEC 72 and PAS16
- Date: 24 Dec 1992 05:23:25 GMT
- Organization: Case Western Reserve University, Cleveland, OH (USA)
- Lines: 17
- Message-ID: <1hbhgdINN189@usenet.INS.CWRU.Edu>
- References: <Bzoq8D.1qx@icon.rose.hp.com> <1h5h06INNjin@usenet.INS.CWRU.Edu>
- Reply-To: as346@cleveland.Freenet.Edu (Bob Mayerovitch)
- NNTP-Posting-Host: hela.ins.cwru.edu
-
-
- In a previous article, rb@hprpcd.rose.hp.com (Robert Brooks) says:
-
- >So your Trantor driver is still in config.sys, but you no longer use
- >the Trantor card? Sounds like you need to remove the Trantor driver
- >and replace it with Mediavision's TSLCDR.SYS driver.
- >
- No, I've tried REMing out the Trantor driver so the TSLCDR.SYS loads
- (which it does by proclaiming that no SCSI adapter is present), but when I
- first rebooted after installing the
- Mediavision-supplied cables and drivers, the TSLCDR.SYS wouldn't recognize
- any SCSI adapter, but the NECCDR.SYS driver allowed that an adapter was
- present but that no SCSI device was.
- In other words, with the new driver, I get nothing, and with the old one I
- get an acknowledgement of the adapter, but nothing else.
- --
- rmayerov@rs6000.baldwinw.edu
-