home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #27 / NN_1992_27.iso / spool / sci / electron / 19199 < prev    next >
Encoding:
Internet Message Format  |  1992-11-19  |  1.2 KB
  1. Path: sparky!uunet!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!cis.ohio-state.edu!rutgers!njitgw.njit.edu!hertz.njit.edu!rxy5310
  2. From: rxy5310@hertz.njit.edu (Rolan Yang  Wasteland Engineer)
  3. Newsgroups: sci.electronics
  4. Subject: Re: Soundblaster voicemail help needed
  5. Keywords: Voice mail
  6. Message-ID: <1992Nov19.065447.3019@njitgw.njit.edu>
  7. Date: 19 Nov 92 06:54:47 GMT
  8. References: <caffrey.722141680@spot.Colorado.EDU>
  9. Sender: news@njit.edu
  10. Organization: New Jersey Institute of Technology, Newark, N.J.
  11. Lines: 11
  12. Nntp-Posting-Host: hertz.njit.edu
  13.  
  14. If you have a Bell telephone, you can just unscrew the mouthpiece
  15. of your handset and tie the two output wires (cut and strip) to
  16. the two on the microphone.  I would recommend keeping the output 
  17. volume very low. I think that you can run the two wires from the
  18. earpiece right into the mic of the soundblaster as well. You may
  19. have to throw a resistor or pot in there.
  20. If your phone isn't Bell or easy to unscrew, there are many cheap
  21. phones out for $5 or you can subscribe to Time and cancel after the
  22. first issue and get the phone for free.:>
  23.                                             Rolan Yang
  24.                                          Wasteland Engineer
  25.