home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.ultrix
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!Sirius.dfn.de!mailgzrz.TU-Berlin.DE!news.netmbx.de!netmbx!weis
- From: weis@netmbx.netmbx.de (Dietmar Weis)
- Subject: Re: recommendation for SCSI-Device-ID's
- Organization: netmbx, Berlin, Germany
- Date: Mon, 16 Nov 1992 13:03:30 GMT
- Message-ID: <SAY8XHM@netmbx.netmbx.de>
- References: <IJS8QPG@netmbx.netmbx.de> <AJC.92Nov12121234@thendara.pa.dec.com>
- Lines: 24
-
- ajc@pa.dec.com (AJ Casamento) writes:
- >In article <IJS8QPG@netmbx.netmbx.de> weis@netmbx.netmbx.de (Dietmar Weis)
- >writes:
-
- >>> Shall I change the slowest device to ID 7 (TZ30) or just put the new disk
- >>> to ID 7?
-
- > If you need to add another device, I would recommend setting the CPU up to
- >ID 7 and then moving the slow devices up the chain. I would recommend against
- >setting anything higher than the CPU ID (that may just be a superstition of my
- >own).
-
- Thank you for your followup, AJ. Yes, it was a posting from you.
- But please tell me: how do I change the ID of the host adapter on the
- cpu board from 6 to 7 ?
- I cannot find this mentioned in my documentations.
-
- Thank you very much.
- Dietmar
- --
- weis@netmbx.netmbx.de | Dietmar Weis DONOP CONSULT GmbH
- Voice: +49 30 884 28 54-0 | Uhlandstrasse 179/180
- Fax: +49 30 882 55 29 | D - 1000 Berlin 12
- I don't speak for my company!
-