home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!stanford.edu!agate!ucbvax!gnh-starport.cts.com!sbennett
- From: sbennett@gnh-starport.cts.com (Stephen Bennett)
- Newsgroups: comp.sys.apple2
- Subject: Re: ProTERM still locks up
- Message-ID: <m0ms6Xf-0000oKC@crash.cts.com>
- Date: 19 Nov 92 17:17:14 GMT
- Sender: daemon@ucbvax.BERKELEY.EDU
- Distribution: world
- Organization: The Internet
- Lines: 19
- X-Unparsable-Date: Wed Nov 11 92 at 20:15:08 (EST)
-
- herbertf@ersys.edmonton.ab.ca (Herbert Fung) writes about problems with PT3
-
- Mmm... in addition to the potential problems with a really fast accelerator,
- I find it's a good idea to hit Ctrl-Reset on GSs after entering PT3...
- stuff about clearing the interrupt buffer, and all that... :)
-
- If that doesn't help, it's possible that it's a problem in your TransWarp, or
- some other piece of your system hardware -- as inconvenient as I know it is,
- you might try pulling various system accessories, and see if that helps...
- Personally, I'd start with the TransWarp since accelerators tend, more than
- other stuff, to be the cause of flakiness, in my opinion... it at least gives
- a good starting place... :)
-
- Good luck!
- ___________________________________________________________________________
- /__Stephen_Bennett,_Co-Sysop_StarPort_BBS_(Va.)_703/560-9308__14.4K_bps_____\
- | UUCP....:crash!gnh-starport!sbennett | I wonder, |
- | InterNet:sbennett@gnh-starport.cts.com | therefore I might be. |
- \_ARPA....:crash!gnh-starport!sbennett@nosc.mil_|___________________________/
-