home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.amiga.hardware:19906 comp.sys.amiga.graphics:7524
- Newsgroups: comp.sys.amiga.hardware,comp.sys.amiga.graphics
- Path: sparky!uunet!sun-barr!cs.utexas.edu!zaphod.mps.ohio-state.edu!darwin.sura.net!haven.umd.edu!decuac!pa.dec.com!rdg.dec.com!leechs.lzo.dec.com!hilton
- From: hilton@leechs.lzo.dec.com (Greg Hilton)
- Subject: URGENT Will this work on a 1200
- Message-ID: <1992Nov18.170232.20349@rdg.dec.com>
- Lines: 46
- Sender: news@rdg.dec.com (Mr News)
- Reply-To: hilton@bahtat.dec.com
- Organization: Digital Equipment Company
- Date: Wed, 18 Nov 1992 17:02:32 GMT
-
-
- HI!
-
- I have a chance of getting the following monitor:
-
- It's a trinitron that has the following scanning frequency:
-
- Vertical : 50 - 87 Hz
- Horizontal: 28 - 49 kHz
-
- Inputs:
-
- RGB D-sub 9-pin Analog.
-
- Sync input: TTL level, polarity free. Composite sync
- is acceptable at Pin #8, sync on green is acceptable.
-
- There is also a Timing Chart (summaary follows)
-
- 1. VGA H kHz 31.47
- V Hz 70.1
-
- 2. 1024 x 768 interlace
- H 35.52
- V 87.0
-
- 3. 35 kHz
- 800 x 600 (non-interlace example)
- H kHz 35.16
- V Hz 56
-
- 4. 48 kHz
- 1024 x 768 (non-interlace example)
- H kHz 48.19
- V Hz 60.0
-
- Then it says 3,4 sync polarity free
-
-
- Any help would be much appreciated
-
-
-
- Cheers,
-
- Greg
-