home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.acorn.tech
- Path: sparky!uunet!usc!zaphod.mps.ohio-state.edu!caen!destroyer!gumby!yale!cs.yale.edu!news-mail-gateway!daemon
- From: /G=Rhodri/S=James/O=SJ-Research/ADMD=INTERSPAN/C=GB/@mhs-relay.ac.uk
- Subject: Re: problems with time on RISCOS 3.1
- Message-ID: <ARM200-921120183133-59F5F20D*@MHS>
- Sender: /G=Rhodri/S=James/O=SJ-Research/ADMD=INTERSPAN/C=GB/@mhs-relay.ac.uk
- Organization: Yale CS Mail/News Gateway
- Date: Fri, 20 Nov 1992 18:31:33 GMT
- Lines: 22
-
- blacka@logica.co.uk writes:
-
- >I recently discovered a number of problems in RISCOS3.1time
- >handling
-
- [details omitted for reasons of space]
-
- I note that in a later post you say you are running RO3.10 in an A420. When
- you put the new ROMs in, did you do a PowerOn-Delete (or similar) to clear
- the CMOS RAM? If not, your time zone could be (and probably is) set to
- anything, and could easily give the bizarre responses mentioned above.
-
- A general note, folks; always, always, always reset your CMOS RAM on
- switching from RO2 to RO3 (or vice versa), as the allocations have changed!
-
- ---
- Rhodri James * Disclaimer: These opinions are shareware,
- SJ Research Ltd, Cambridge * and may only be used if you send off
- Rhodri.James%gb.INTERSPAN.sj * $100 registration fee in used fivers.
- @mhs-relay.ac.uk * SJ Research is not registered with me.
- or *
- rmj10@phx.cam.ac.uk * Wombats are go!
-