home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.robotics
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!malgudi.oar.net!zeus.franklin.edu!wallace
- From: wallace@zeus.franklin.edu (Steve Wallace)
- Subject: Miniboard kits
- Message-ID: <1992Nov20.164412.1695@zeus.franklin.edu>
- Organization: Franklin University
- Date: Fri, 20 Nov 1992 16:44:12 GMT
- Lines: 144
-
- Okay guys heres my P.O. Box the address is
- P.O. Box 20504
- Columbus OH 43220 USA
-
- Make all checks out to Steve Wallace (the sooner the checks get here the
- sooner I can get The Kits).You can figuire out how much to send by adding
- the listed amount for the boards and assembly plus the postage (wich can be
- figuired out by adding $3.00 for postage if you live in the US or $6.00 if
- Your ordering outside the US + the amount for insurence for the amount of
- boards ordered but if you live outside the US just add $6.00
- for insurence).
-
- The kits are $40.00 and you can get them assembled for $10.00
- but you need to send me the board.
-
- I've finaly decided How I'm going to handle the postage
- 1. Im not sending it UPS
- 2. I've decided on a simple system for insuring the mail
- if your order is from within the US.
-
- number of Kits price to add to shipping
- 1 Kit $0.75
- 2 Kits $1.60
- 3 to 4 Kits $2.40
- 5 to 6 Kits $3.50
- 7 to 8 Kits $4.60
- 9 to 10 Kits $5.40
- 3. If you live in the US the Postage is $3.00 in any other country the
- postage is $6.00
-
- 4. If you live anywhere outside the US and want insurance
- just send me $6.00 Since costs vary in different country's and if its
- more I'll let you know but ill ship it anyway and you can send me a
- check ect.....
-
- 5. Just to remind everybody Im not handeling the PC Boards.
- You can get them by contacting Greg ratcliff at
- ratcliff.8@osu.edu
- I believe he's selling the PC boards for $6.00 a piece
- if you want assembled boards just ask him to send your boards to me
-
- This is a list of all the orders I have received
-
- Name Number of kits Number of Assembled Kits Amount Due
-
- Serge Boentges 5 kits 5 assembled $250.00
- Paul Davies 1 kit none $40.00
- Daniel Poirot 2 kits. none $80.00
- Lee Hounshell 10 kits none $400.00
- wxv4@hela.INS.CWRU.Edu 1 kit none $40.00
- Stephen A. Witt 1 kit none $40.00
- Chris Beasly 2 kits none $80.00
- Rob Scot 2 kits none $80.00
- Sandip 1 kits 1 assembled $50.00
- Jim Disbrow 2 kits none $80.00
- Scot Dodson 2 kits 1 assembled $90.00
- Mike Hollenbeck 2 kits none $80.00
- Steve Valentine 2 kits $80.00
- dulimart@cps.msu.edu 1 kits 1 assembled $50.00
- Randy Just 1 kit none $40.00
- Larry Ray 1 kit none $40.00
- Don Jacob 1 kit none $40.00
- David R.Johnston 2 kits none $80.00
- lance Haines 3 kits none $120.00
- CHARLES A FLOYD 4 kits none $160.00
- Frank Authenreith 2 kits none $80.00
- mpearce 1 kit none $40.00
- Chris 1 kit none $40.00
- Andrew H. Bond 1 kit none $40.00
- Carlos Puchol 2 kits none $80.00
-
-
- The following is a parts list
-
- IC's
-
- U2 1 74HC04 hex inverter
- U3,U4 2 SGS-Thomson L293D
- U5 1 LM2931Z-5.0 regulator
-
- Switches
-
- SW1,SW2 2 Panasonic pushbotton switch
- SW3 1 SPDT miniature slide switch
-
- LEDs
- LED 1-5 5 HLMP1700 high eff red LED
- LED 6-10 5 HLMP1700 high eff green LED
-
- Resistor Packs
-
- RP1 1 1K x 5 common terminal
- RP2 1 1K x 4 isolated terminal
- RP3, 1 1K x 3 isolated terminal
- RP4,RP5 2 47k x 7 common terminal
- RP6 1 47k x 9 common terminal
-
- Individual resistors
-
- R1 1 10.0K precision resistor
- R2 1 20.0K precision resistor
- R3,R4 2 10K 1/8w
- R5 1 100k 1/8w
- R6 1 2.2M 1/8w
-
- Capacitors
-
- C1 1 330 uF 6.3v electrolytic
- C2 1 1 uF tantalum
- C3-C5 3 0.1 uF monolithic
-
- Connectors/Sockets
-
- J1 1 2 position terminal block
- J2 1 3 position RJ11 4 wire jacks
-
- Miscellaneous
-
- XTAL 1 8 MHz ceramic resonator
- L1,L2 2 high current inductors
- Q1 1 2N3905 PNP general purpose
- 1 4 C cell battery holder
- 4 alkaline C cell
- 1 piezo beeper
- 1 power switch
- 1 modular plug cable
- 1 DB-25 female to modular jack
- 1 DB-9 female to modular jack
- 1 9-wire rainbow ribbon cable
- 2 3/32" heat shrink tubing
-
- Sensors
-
- 2 male strip header connector
- 2 reflective IR sensor
- 2 phototransistor
- 3 photocell
- 3 touch switch
-
-
- thanks
- //Steve Wallace\\
- Send all email to wallace@zeus.franklin.edu
-
-