home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.mail.elm
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!ira.uka.de!ira.uka.de!rz.uni-karlsruhe.de!ubka.uni-karlsruhe.de!johannes
- From: johannes@ubka.uni-karlsruhe.de (Johannes Viegener)
- Subject: Re: xterm display troubles on AIX 3.2
- Message-ID: <1992Nov20.130422.10884@rz.uni-karlsruhe.de>
- Keywords: RS-6000 xterm display help
- Sender: usenet@rz.uni-karlsruhe.de (USENET 'No news is bad news' News System)
- Organization: University of Karlsruhe, Germany
- References: <12@dyson.apple.com>
- Date: Fri, 20 Nov 1992 13:04:22 GMT
- Lines: 27
-
- There are two solutions for this problem:
-
- The first one which works for us is the same which we used
- for elm 2.3:
-
- At the end of the configuration process the script asks
- if you want to edit the configuration. Make a shell escape
- here and open an editor on the file 'config.sh', search
- for a line with: "termlib='-ltermlib'" in it and change this
- line to :"termlib='-lcurses'". Exit the shell and run make.
- On our machines (all running AIX 3.2.0) the display is
- correct for xterm.
-
- The second one is to write a working /etc/termcap-entry for
- xterm. I never tried this, but it seems obvious to me, that
- the problem would be solved with a correct termcap-entry.
-
-
- Hope this helps, Johannes
- --
-
-
- +------------------------------------------------------------------------------+
- | JOHANNES VIEGENER: johannes@ubka.uni-karlsruhe.de Tel: (+49) 721-608-3133 |
- +------------------------------------------------------------------------------+
- | Universitaetsbibliothek Karlsruhe / Postfach 6920 / 7500 Karlsruhe / Germany |
- +------------------------------------------------------------------------------+
-