home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.modems
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!neoucom.edu!wtm
- From: wtm@uhura.neoucom.edu (Bill Mayhew)
- Subject: Re: T-3000 + Fax Upgrade
- Message-ID: <1992Nov17.140449.14649@uhura.neoucom.edu>
- Keywords: T-3000 fax WorldBlaer upgrade
- Organization: Northeastern Ohio Universities College of Medicine
- References: <83789@ut-emx.uucp>
- Date: Tue, 17 Nov 1992 14:04:49 GMT
- Lines: 18
-
- The newer T-3000 units are the same as Worldblazers except for the
- EPROMs (possibly) and a PAL chip (definitely). The WB EPROM code
- will recogize the board as a T-3000 and will act like a T-3000
- until the PAL is swapped. After the PAL change, Poof! instant WB.
-
- I found this out when I received the T-3000 to WB upgrade that had
- a defective PAL. I left the WB EPROMs in, and put the old PAL back
- in until TB sent me a new PAL.
-
- Presuming all the code will fit into the EPROM space, the fax
- upgrade should just be new EPROMS and a new PAL. Hopefully some
- decent hoset software is included.
-
-
- --
- Bill Mayhew NEOUCOM Computer Services Department
- Rootstown, OH 44272-9995 USA phone: 216-325-2511
- wtm@uhura.neoucom.edu (140.220.1.1)
-