BAD_VERSION:Unknown file version number, program version not up to date.
NO_MEMORY:Operation not performed, cannot extend memory.
BUG_NOCOMFILE:Cannot open company details file. Check that the disc is not write protected.
BUG_NOTINDIRECT:Error: Cannot write to non-indirect icon.
BUG_NOTEMPLATE: Error: Cannot find template.
SAVE_FIRST:WARNING: Project modified, changes will be lost! Do you really want to Quit?.
SAVE_DEMO:Project has been modfied, but you cannot save it with this demo version. Click OK to Quit.
CANNOT_OPEN:Cannot open file. Check that the disc is not write protected.
NOT_PROJECT:File does not contain a project.
NOT_ING_FILE:Wrong file type for ProjectING.
READ_ERROR:Error reading project file.
WRITE_ERROR:Error writing project file. Check that there is sufficient space on the disc.
GLOBACT_READ_ERR:Error while reading global activities file.
GLOBACT_WRITE_ERR:Cannot write global activities file.
GLOBFORM_WRITE_ERR:Cannot write global activities format file.
GLOB_READ_ERR:Error while reading global resource file.
GLOB_WRITE_ERR:Cannot write global resource file.
REP_READ_ERR:Cannot read report definition file.
INDEX_READ_ERR:Error while reading global resource index.
INDEX_WRITE_ERR:Cannot write global resource file.
GLOB_PTR_ERR:Cannot update pointers in global resources file.
TRANS_WRITE_ERROR:Error writing to transfer file.
TRANS_READ_ERROR:Error reading from transfer file.
TRANS_BAD_EVENT_ACTIVITY:Event or Activity does not exist.
TRANS_BAD_ARTEMIS_RECORD:Bad transfer record.
CANT_DISCONNECT:Cannot disconnect at transmitter or receiver event.
#or interface event.
BAD_RECONNECT:Reconnection not allowed if there is a joining activity. Action ignored.
LOOP_RECONNECT:Reconnection not allowed if it makes a loop, action ignored
CANT_RECONNECT:Cannot reconnect at transmitter or receiver event.
#or interface event.
ABANDONDED:Abandoned trying to cross the zero page boundary.
OVER_EDGE:Drawing has reached the edge of the paper, creating a new sheet...
BOUNDARY:Crossing page boundary.
NODE_CHANGED:Action has caused a change of event type.
CANT_REDRAW:Activity invalid between these events .
RESOURCE_MISSING:Missing resource details.
RESOURCE_NOSELECT:No resource selected.
RESOURCE_USED:Resource is used and cannot be deleted.
FSD_IGNORED:FSD is ignored due to calendar inconsistency.
ACTIVITY_NO_HORIZ:Activity invalid no horizontal component.
BAD_TIME_NOW:Working date is invalid.
BAD_NODE_FORMAT:Bad event identifier format.
DUP_NODE_ID:Event identifier already exists.
BAD_RES_ADD:Resource code already used.
BAD_RES_CHANGE:The resource code cannot be changed. Delete the entry and re-create the new code.
RES_NOT_KNOWN:Unknown resource code. Enter the resourse details in the global resources file.
ACT_LOOP:This activity makes a loop. Action ignored.
BAD_ST:Invalid split target date entered.
BAD_CALENDAR_ID:Calendar number should be 0-63.
BAD_TS:Invalid target start entered.
BAD_TC:Invalid target completion entered.
BAD_AS:Invalid actual start date entered.
BAD_AF:Invalid actual finish date entered.
BAD_WD:Invalid working date entered.
PROGRESS_TOO_LARGE:Progress greater than 100% is invalid.
RDU_TOO_LARGE:Remaining duration cannot be more than total duration.
BAD_FSD:Invalid fixed start day.
LIB_DUP_EVENT:Library event(s) duplicated in the current project.
LIB_NO_LOAD:You cannot add to existing projects. Remove the current project first.
NO_SAVE_DIR:To save, drag the icon to a directory viewer.
BAD_NAME:Invalid filename.
TOO_MANY_PAGES:Too many pages.
ING_SMALL:Overview
INFO_TITLE:About this program
SAVE_AS:Save as:
TRANSFER_AS:Transfer as:
CANT_PRINT:Cannot open printer stream.
NEXT_PAGE:Plotter ready for sheet ?
BAD_MENU:Cannot find menu definition in messages file.
BAD_FORM:No report form file defined in messages file.
FORM_ERROR:An error was found the report form file.
STOP_PRINT:Escape: Aborting print job...
NO_ESC_HANDLER:Cannot establish escape handler.
NO_ESC_RESTORE:Cannot restore escape handler.
NO_MEMORY:Insufficient memory, program aborting...
ADD_RES:Resource not found, adding to global resource file...
# Help messages.
# =============
HELP_DRAW:Draw enters/leaves drawing mode. Click Select to start activity. Click Select for bend in line. Double click Select to finish activity. Start/Finish events created if needed.
HELP_PAGE:Displayed page size can be changed by choosing different paper size in the Setup Options box.
HELP_SETUP:Use Setup Options box to set project parameters and to choose operating modes for the program.
HELP_CALS:Setup Calendar allows you to set holidays and rest days for the project. Rest days are displayed in Green. Holidays are displayed in Red.
HELP_MENU:Analyse Save or Print needs a network. Edit network entries need a large scale ProjectING window. For operations on objects, an event or activity must be selected.
HELP_DATA:Some menu choices display dialogue boxes. Place caret in box and enter new value or select radio button by clicking on it. Click OK to action the entered data.
HELP_SAVE:Dragging the Save menu entry right shows a file icon. To save a new file, enter the name and drag the file icon to a directory or enter the full path name and click Save.
HELP_PLOT:Choose Plotter from the Print network menu. Select All or a sheet number to be plotted and click Print.
HELP_REDRAW:Choosing Redraw activity (on Edit network menu) with a selected activity enters drawing mode for one activity. Re-shape activity line or change the start or end point.
HELP_DRAG:With Select button down on an event, move the cursor to the required end of the drag and release. Drag ends in space. Event and activity ends move.
HELP_DISCONNECT:Choosing Disconnect (Edit network) with a selected event splits it into two events if it has both incoming and outgoing activities. Drag one with Select down - attached network will move.
HELP_RECONNECT:Drag an event with the Select button onto another event. They will connect unless joined by activity or one of the events is a transmitter or receiver. Attached network will also move.
#or interface
HELP_BLOCK:Drag a event with Adjust button to move outgoing parts of the network. Hold down Shift while dragging with Adjust to move incoming network.
HELP_LIBRARY:Drag a file icon with the Select button into open ProjectING window. The file network will be added at the end of the drag. Position using Block drag.
HELP_DELETE:Choosing Delete (Edit network) with activity selected deletes it. Choosing Delete (Edit network) with event selected deletes all incoming or outgoing activities. BEWARE!
HELP_ANALYSIS:Choose Analysis to perform analysis. Choose Setup Options and set auto analysis to Forward or Both to perform analysis for every appropriate data change.
# Reports Menu & Form File Definitions
# ====================================
REPORTS:Print reports
REPORTS_01:>Global resources <P>
REPORTS_02:>Global allocation <P>
REPORTS_03:>Resource report <P>
REPORTS_04:>Project resources <L>
REPORTS_05:>Project costs <P>
REPORTS_06:>Department list <L>
REPORTS_07:>All activities <L>
REPORTS_08:>Critical path <L>
REPORTS_09:>Float list <P>
REPORTS_10:>Milestone plan <P>
# The user may add customised reports to the menu here, as shown.
# N.B. A suitable form file pathname must also be defined below.
REPORTS_11:>Custom report 1
REPORTS_12:>Custom report 2
REPORTS_13:>Custom report 3
# Report form file names, these should specify full pathnames.
