home *** CD-ROM | disk | FTP | other *** search
-
- V7-MERCURY P-64 (PCI) Jumpers
-
-
- The V7-MERCURY P-64 (VL) has two jumpers, the PCI version has one jumper.
-
- Jumper No. 1 (only VL, shown as JP1 on the board) activates or deactivates the VGA part on the graphics board.
-
- Jumper position 1-2 (default):
- VGA part enabled
-
- Jumper position 2-3:
- VGA part disabled (as secondard board in the system)
-
- Jumper No. 2 (as JP2 on the board) activates or deactivates the Interrupt Requests.
-
- Jumper position 1-2 (default):
- IRQ is disabled
-
- Jumper position 2-3:
- IRQ is enabled.
-
-