Media Gallery 1995 June/MG6.ISO/spea/install/mirage/install.dat

Text File | 1995-04-06 | 53.2 KB | 1,490 lines

@DefineProject
 @Name     = "V7-MIRAGE"
 @Version  = "Utilities & Various DOS Drivers - Release 1194.4"
 @OutDrive = C
 @Subdir   = "\\SPEA\\GDC"
 @Requires @HardDisk
 @Immediate = 1
@EndProject

@DefineVars
 @QString @FExt = "BAT"
 @QString @B = "V7-MIRAGE"
 @QString @Checkfile = "S3TEST.EXE"
 @QString @t151 = "  @Name    @Version"
 @QString @d8 = "\n\n\n\n\n\n\n\n"
 @Drive @acad12drv = C
 @Dir @acad12dir = "\\ACAD"
 @Drive @ckdrv = C
 @Dir @ckdir = "\\CADKEY"
 @Drive @cvandrv = C
 @Dir @cvandir = "\\CADVANCE"
 @Drive @datadrv = C
 @Dir @datadir = "\\MTEC"
 @Drive @gendrv = C
 @Dir @gendir = "\\CADD6"
 @Drive @ustardrv = C
 @Dir @ustardir = "\\USTATION"
 @Drive @ustapdrv = C
 @Dir @ustapdir = "\\USTATION"
 @Drive @usta5drv = C
 @Dir @usta5dir = "\\USTATION"
 @Drive @lotusdrv = C
 @Dir @lotusdir = "\\123"
 @Drive @symdrv = C
 @Dir @symdir = "\\SYM"
 @Drive @worddrv = C
 @Dir @worddir = "\\WORD"
 @Drive @versadrv = C
 @Dir @versa53dir = "\\VCAD53"
 @Dir @versa54dir = "\\VCAD"
 @Dir @versa386dir = "\\VCAD386"
 @Drive @wpdrv = C
 @Dir @wpdir = "\\WP"
@If (@L==1)
@QString @Lng = "-e"
@QString @t011 = " Use the keys [] and [] to select a drive. Press [─┘] to continue."
@QString @t012 = " "
@QString @t021 = " Use the SPACE BAR to select YES or NO."
@QString @t022 = " Press [─┘] to continue and create this directory (if YES)"
@QString @t023 = " or to modify the last input (if NO)."
@QString @t031 = " For more information about the configuration of drivers, please refer to"
@QString @t032 = " the @B manual or to file README at the end of this installation."
@QString @t033 = " "
@QString @t041 = " On which disk drive is"
@QString @t042 = "installed at present?"
@QString @t051 = " In which directory is"
@QString @t061 = "does not exist. Do you want to create it?"
@QString @t071 = " Installation of"
@QString @t072 = "has been prepared successfully."
@QString @t081 = " Directory"
@QString @t091 = " Which directory"
@QString @t101 = "already exists."
@QString @t102 = " Do you want to continue installing in this directory?"
@QString @t111 = " Use the SPACE BAR to select YES or NO. Press [─┘] to continue."
@QString @t121 = " On which disk drive do you want to install the \"@B Utilities\" ?"
@QString @t131 = " For which version of"
@QString @t132 = "do you want to install @B drivers?"
@QString @t133 = " Use the keys [] and [] to select. Press [─┘] to continue."
@QString @t141 = " On which disk drive do you want to install the @B driver"
@QString @t142 = " and the font files for AutoCAD release 11 ?"
@QString @t143 = " In which directory do you want to install the @B driver"
@QString @t144 = " On which disk drive do you want to install the font files"
@QString @t145 = " for AutoCAD Release 12 ?"
@QString @t146 = " In which directory do you want to install the font files"
@QString @t147 = " and the font files for AutoShade / 3DStudio ?"
@QString @t148 = " Which font size do you want to use in AutoCAD und AutoShade ?"
@QString @t152 = "  Supported applications:"
@QString @t153 = "  Prior to the installation of the @B drivers, the corresponding"
@QString @t154 = "  applications must be already installed."
@QString @t161 = "  During installation you will be asked to specify on which disk drive and"
@QString @t162 = "  in which directory the corresponding application is installed at present"
@QString @t163 = "  (exception: AutoCAD Rel. 11)."
@QString @t164 = "  INFORMATION ON HOW TO USE YOUR KEYBOARD:"
@QString @t165 = "  If the default directory name in the entering field is correct, press"
@QString @t166 = "  the RETURN key [─┘] to continue."
@QString @t167 = "  If the application is installed in a different directory, press the"
@QString @t168 = "  BACKSPACE key [─-] and enter the right directory name. Then press [─┘]."
@QString @t169 = " "
@QString @t16a = "  If you entered a false drive/directory name :"
@QString @t16b = "  press again [─┘] to repeat the entry."
@QString @t16c = "  You can abort the installation at any time by pressing the [Esc] key."
@QString @t171 = "        Select the applications for which you want to install drivers."
@QString @t172 = "        ATTENTION: If this installation program is being executed for"
@QString @t173 = "                   the FIRST TIME, also select \"@B Utilities\"."
@QString @t174 = "         Use the []  and []  keys to move the cursor up and down."
@QString @t175 = "         Use the SPACE BAR  to activate or deactivate installation of"
@QString @t176 = "         the driver at the cursor position. Press [─┘] when finished."
@QString @t177 = "            No driver was selected for installation!"
@QString @t181 = " There is EMS (Extended Memory) available on your system. Do you want"
@QString @t182 = " to make use of the EMS version of the @B DataCAD driver?"
@QString @y = "YES "
@QString @n = "NO  "
@QString @t191 = " If you want to make use of the screen save function"
@QString @t192 = " (load screen/save screen), select the big driver version."
@QString @t193 = " If not, select the small driver version."
@QString @t194 = "Generic CADD small driver version"
@QString @t195 = "Generic CADD big driver version  "
@QString @t201 = " Please enter the directory in which you want the \"@B Utilities\""
@QString @t202 = " to be installed. The standard name of the directory is: @SubDir"
@QString @t203 = " "
@QString @t204 = "Do you want to continue"
@QString @t205 = " installing the \"@B Utilities\" in this directory?"
@QString @t251 = " On which disk drive did you install the \"@B Utilities\" ?"
@QString @t252 = " In which directory did you install the \"@B Utilities\" ?"
@QString @t253 = "does not contain the \"@B Utilities\"."
@QString @t254 = "does not exist."
@QString @t300 = " Cannot find the \"@B Utilities\" in directory"
@QString @t301 = " If the \"@B Utilities\" are not installed, press [Esc]."
@QString @t320 = " NOTE:      Driver installation for Windows"
@QString @t323 = " After the end of the current installation procedure,"
@QString @t321 = " please insert disk \"Drivers for Windows\" and type:"
@QString @t322 = " README  [─┘]"
@QString @Driver = "Driver"
@QString @for = "for"
@Endif
@If (@L==2)
@QString @Lng = "-d"
@QString @t011 = " Mit den Tasten [] und [] können Sie ein Laufwerk auswählen."
@QString @t012 = " Bestätigen Sie mit [─┘]."
@QString @t021 = " Wählen Sie JA oder NEIN mit der LEERTASTE."
@QString @t022 = " Drücken Sie [─┘] zur Fortsetzung (Verzeichnis wird erzeugt, wenn JA)"
@QString @t023 = " oder zur Änderung der letzten Eingabe (wenn NEIN)."
@QString @t031 = " Weitere Informationen zur Treiberkonfiguration entnehmen Sie bitte dem"
@QString @t032 = " @B Handbuch oder der Datei README am Ende dieser Installation."
@QString @t033 = " "
@QString @t041 = " Auf welchem Laufwerk ist"
@QString @t042 = "derzeit installiert?"
@QString @t051 = " In welchem Verzeichnis ist"
@QString @t061 = "existiert nicht. Wollen Sie es erzeugen ?"
@QString @t071 = " Die Installation von"
@QString @t072 = "wurde erfolgreich vorbereitet."
@QString @t081 = " Verzeichnis"
@QString @t091 = " Welches Verzeichnis"
@QString @t101 = "existiert bereits."
@QString @t102 = " Wollen Sie die Installation in diesem Verzeichnis fortsetzen?"
@QString @t111 = " Wählen Sie JA / NEIN mit der Leertaste. Drücken Sie anschließend [─┘]."
@QString @t121 = " Auf welchem Laufwerk wollen Sie die \"@B Utilities\" installieren?"
@QString @t131 = " Für welche Version von"
@QString @t132 = "wollen Sie @B Treiber installieren?"
@QString @t133 = " Benutzen Sie die Tasten [] und [] zur Auswahl. Bestätigen Sie mit [─┘]."
@QString @t141 = " Auf welches Laufwerk wollen Sie den @B Treiber und die"
@QString @t142 = " Schriftfontdateien für AutoCAD Release 11 installieren?"
@QString @t143 = " In welches Verzeichnis wollen Sie den @B Treiber und die"
@QString @t144 = " Auf welches Laufwerk wollen Sie die Schriftfontdateien"
@QString @t145 = " für AutoCAD Release 12 installieren?"
@QString @t146 = " In welches Verzeichnis wollen Sie die Schriftfontdateien"
@QString @t147 = " Schriftfontdateien für AutoShade / 3DStudio installieren?"
@QString @t148 = " Welche Schriftfontgröße wollen Sie in AutoCAD und AutoShade nutzen?"
@QString @t152 = "  Unterstützte Anwendungen:"
@QString @t153 = "  Vor der Installation der @B Treiber müssen die entsprechenden"
@QString @t154 = "  Anwendungen bereits installiert sein."
@QString @t161 = "  Im Verlauf der Installation werden Sie aufgefordert einzugeben, auf"
@QString @t162 = "  welchem Laufwerk und in welchem Verzeichnis die betreffende Anwendung"
@QString @t163 = "  derzeit installiert ist (Ausnahme: AutoCAD Rel.11)."
@QString @t164 = "  INFORMATION ZUR BEDIENUNG DER TASTATUR:"
@QString @t165 = "  Wenn der vorgegebene Verzeichnisname im Eingabefeld korrekt ist, drücken"
@QString @t166 = "  Sie die ENTER-Taste [─┘] zur Fortsetzung."
@QString @t167 = "  Wenn die Anwendung in einem anderen Verzeichnis installiert ist, betätigen"
@QString @t168 = "  Sie die Rückwärtstaste [─-] und geben den richtigen Verzeichnisnamen ein."
@QString @t169 = "  Drücken Sie anschließend [─┘]."
@QString @t16a = "  Wenn Sie versehentlich ein falsches Laufwerk/Verzeichnis eingegeben haben:"
@QString @t16b = "  drücken Sie nochmals [─┘], um die Eingabe zu wiederholen."
@QString @t16c = "  Ein Abbruch der Installation ist jederzeit mit der Taste [Esc] möglich."
@QString @t171 = "    Wählen Sie die Anwendungen, für die Treiber installiert werden sollen."
@QString @t172 = "    ACHTUNG:   Wenn dieses Installationsprogramm zum ERSTEN MAL ausgeführt"
@QString @t173 = "               wird, wählen Sie zusätzlich \"@B Utilities\"."
@QString @t174 = "       Mit den Tasten [] und [] können Sie den Auswahlbalken bewegen."
@QString @t175 = "       Mit der LEERTASTE können Sie den invers dargestellten Treiber"
@QString @t176 = "       zur Installation aktivieren/deaktivieren. Fortsetzung mit [─┘]."
@QString @t177 = "            Es wurden keine Treiber zur Installation ausgewählt!"
@QString @t181 = " Sie haben EMS (Extended Memory) in Ihrem System verfügbar."
@QString @t182 = " Wollen Sie die EMS-Version des @B DataCAD Treibers nutzen?"
@QString @y = " JA "
@QString @n = "NEIN"
@QString @t191 = " Wenn Sie die screen save - Funktion (Bildschirm laden bzw. speichern)"
@QString @t192 = " nutzen wollen, wählen Sie den großen Treiber."
@QString @t193 = " Ansonsten wählen Sie den kleinen Treiber."
@QString @t194 = "Generic CADD kleiner Treiber"
@QString @t195 = "Generic CADD großer Treiber "
@QString @t201 = "      Bitte geben Sie das Verzeichnis an, in dem die"
@QString @t202 = "      \"@B Utilities\" installiert werden sollen."
@QString @t203 = "      Das Standardverzeichnis hierfür lautet: @SubDir"
@QString @t204 = "Wollen Sie die Installation"
@QString @t205 = " der \"@B Utilities\" in diesem Verzeichnis fortsetzen?"
@QString @t251 = " Auf welchem Laufwerk haben Sie die \"@B Utilities\" installiert ?"
@QString @t252 = " In welchem Verzeichnis haben Sie die \"@B Utilities\" installiert ?"
@QString @t253 = "enthält nicht die \"@B Utilities\"."
@QString @t254 = "existiert nicht."
@QString @t300 = " Kann die \"@B Utilities\" nicht finden im Verzeichnis"
@QString @t301 = " Wenn die \"@B Utilities\" nicht installiert sind, drücken Sie [Esc]."
@QString @t320 = " ANMERKUNG:     Treiberinstallation für Windows"
@QString @t323 = " Nach Beendigung dieses Installationsprogrammes, legen Sie bitte"
@QString @t321 = " die Diskette \"Drivers for Windows\" ein und geben Sie ein:"
@QString @t322 = " README  [─┘]"
@QString @Driver = "Treiber"
@QString @for = "für"
@Endif
@If (@L==3)
@QString @Lng = "-e"
@QString @t011 = " Sélectionnez le lecteur avec les touches [] et []. Validez avec [─┘]."
@QString @t012 = " "
@QString @t021 = " Choississez OUI ou NON avec la BARRE D'ESPACEMENT."
@QString @t022 = " Appuyez sur [─┘] pour continuer (le répertoire sera créé en cas de OUI)"
@QString @t023 = " ou pour modifier la dernière entrée (en cas de NON)."
@QString @t031 = " Veuillez trouver dans le manuel @B ou le fichier README"
@QString @t032 = " à la fin de cette installation de plus amples informations sur la"
@QString @t033 = " configuration des gestionnaires."
@QString @t041 = " Sur quel lecteur"
@QString @t042 = "est-il actuellement installé ?"
@QString @t051 = " Dans quel répertoire"
@QString @t061 = "n'existe pas. Souhaitez-vous le créer ?"
@QString @t071 = " L'installation de"
@QString @t072 = "a été préparée avec succès."
@QString @t081 = " Le répertoire"
@QString @t091 = " Quel répertoire"
@QString @t101 = "existe déjà."
@QString @t102 = " Souhaitez-vous poursuivre l'installation dans ce répertoire?"
@QString @t111 = " Choississez OUI/NON avec la barre d'espacement. Appuyez ensuite sur [─┘]."
@QString @t121 = " Sur quel lecteur souhaitez-vous installer les \"@B Utilities\" ?"
@QString @t131 = " Pour quelle version de"
@QString @t132 = "voulez-vous installer des gestionnaires?"
@QString @t133 = " Employez les touches [] et [] pour choisir. Validez avec [─┘]."
@QString @t141 = " Sur quel lecteur souhaitez-vous installer le gestionnaire @B"
@QString @t142 = " et les fichiers de caractères pour AutoCAD Release 11 ?"
@QString @t143 = " Dans quel répertoire souhaitez-vous installer le gestionnaire @B"
@QString @t144 = " Sur quel lecteur souhaitez-vous installer les fichiers de caractères"
@QString @t145 = " pour AutoCAD Release 12 ?"
@QString @t146 = " Dans quel répertoire souhaitez-vous installer les fichiers de caractères"
@QString @t147 = " et les fichiers de caractères pour AutoShade / 3DStudio ?"
@QString @t148 = " Quelle taille de caractère souhaitez-vous utiliser dans AutoCAD/AutoShade ?"
@QString @t152 = "  Applications supportées:"
@QString @t153 = "  Avant d'installer des gestionnaires @B il faut déjà avoir"
@QString @t154 = "  installé les applications concernées."
@QString @t161 = "  Au cours de l'installation, vous serez prié d'indiquer sur quel lecteur"
@QString @t162 = "  et dans quel répertoire l'application concernée est installé actuellement."
@QString @t163 = "  (exception: AutoCAD Rel.11)."
@QString @t164 = "  INFORMATIONS SUR L'EMPLOI DU CLAVIER:"
@QString @t165 = "  Si le nom de répertoire prétendu dans le carré d'entrée est juste,"
@QString @t166 = "  appuyer sur la TOUCHE D'ENTREE [─┘] pour valider."
@QString @t167 = "  Si l'application est installée dans un répertoire different, employez"
@QString @t168 = "  la TOUCHE ARRIERE [─-] et tapez le nom de répertoire juste."
@QString @t169 = "  Appuyez ensuite sur [─┘]."
@QString @t16a = "  Si vous avez indiqué, par mégarde, un faux lecteur/répertoire,"
@QString @t16b = "  appuyez sur [─┘] encore une fois pour répéter l'entrée."
@QString @t16c = "  En tout temps, vous pouvez rompre l'installation en appuyant sur [Esc]."
@QString @t171 = "    Sélectionnez les applications pour lesquelles vous souhaitez installer"
@QString @t172 = "    des gestionnaires. ATTENTION: En exécutant ce programme d'installation"
@QString @t173 = "    POUR LA PREMIERE FOIS, choississez \"@B Utilities\" de plus."
@QString @t174 = "  Avec les touches  [] et [] , vous pouvez déplacer la barre de sélection."
@QString @t175 = "  Avec la  BARRE D'ESPACEMENT , vous pouvez activer ou désactiver pour l'in-"
@QString @t176 = "  stallation le gestionnaire représenté en contraste."
@QString @t177 = "       Aucun gestionnaire n'a été choisi pour l'installation!"
@QString @t181 = " Votre système dispose de mémoire EMS (Extended Memory)."
@QString @t182 = " Souhaitez-vous utiliser la version EMS du gestionnaire @B DataCAD ?"
@QString @y = "OUI"
@QString @n = "NON"
@QString @t191 = " Si vous souhaitez utiliser la fonction screen save (charger ou mémoriser"
@QString @t192 = " écran), choississez le grand gestionnaire."
@QString @t193 = " Sinon, choississez le petit gestionnnaire."
@QString @t194 = "Generic CADD petit gestionnaire"
@QString @t195 = "Generic CADD grand gestionnaire"
@QString @t201 = "      Veuillez indiquer le répertoire dans lequel"
@QString @t202 = "      les \"@B Utilities\" doivent être installés."
@QString @t203 = "      Le répertoire standard est: @SubDir"
@QString @t204 = "Souhaitez-vous poursuivre "
@QString @t205 = " l'installation des \"@B Utilities\" dans ce répertoire ?"
@QString @t251 = " Sur quel lecteur les \"@B Utilities\" sont-ils installés ?"
@QString @t252 = " Dans quel répertoire les \"@B Utilities\" sont-ils installés ?"
@QString @t253 = "ne contient pas les \"@B Utilities\"."
@QString @t254 = "n'existe pas."
@QString @t300 = " \"@B Utilities\" introuvable dans répertoire"
@QString @t301 = " Si les \"@B Utilities\" ne sont pas installés, appuyer sur [Esc]."
@QString @t320 = " REMARQUE:       Installation de gestionnaires pour Windows"
@QString @t323 = " Après la fin du programme d'installation courant, insérez"
@QString @t321 = " la disquette \"Drivers for Windows\", s.v.p., et entrez:"
@QString @t322 = " README  [─┘]"
@QString @Driver = "Driver"
@QString @for = "pour"
@Endif
@If (@L==5)
@QString @Lng = "-e"
@QString @t011 = " Con i tasti [] e [] è possibile di scegliere un'unità disco."
@QString @t012 = " Confermare con [─┘]."
@QString @t021 = " Selezionare SI o NO con la BARRA SPAZIATRICE."
@QString @t022 = " Azionare [─┘] per continuare (la directory verrà generata in caso di SI)"
@QString @t023 = " oppure per modificare l'ultima inserzione (in caso di NO)."
@QString @t031 = " Per ulteriori informazioni sulla configurazione dei driver"
@QString @t032 = " si rimanda al manuale @B oppure al file README,"
@QString @t033 = " presente alla fine di quest' installazione."
@QString @t041 = " Su quale unità disco è attualmente installato"
@QString @t042 = "?"
@QString @t051 = " In quale directory è attualmente installato"
@QString @t061 = "non esiste. Deve essere generata ?"
@QString @t071 = " L'installazione di"
@QString @t072 = "venne preparata con successo."
@QString @t081 = " Directory"
@QString @t091 = " Quale directory"
@QString @t101 = "esiste già."
@QString @t102 = " Continuare con l'installazione in questa directory?"
@QString @t111 = " Selezionare SI / NO con la BARRA SPAZIATRICE e confermare con [─┘]."
@QString @t121 = " Su quale unità disco si desidera di installare i \"@B Utilities\" ?"
@QString @t131 = " Per quale versione di"
@QString @t132 = "\n si desidera di installare il driver @B?"
@QString @t133 = " Impiegare i tasti [] e [] per la selezione. Confermare con [─┘]."
@QString @t141 = " Su quale unità disco si desidera di installare il driver @B"
@QString @t142 = " ed i file dei set di caratteri (Fonts) per AutoCAD Release 11 ?"
@QString @t143 = " In quale directory si desidera di installare il driver @B"
@QString @t144 = " Su quale unità disco si desidera di installare i file dei"
@QString @t145 = " set di caratteri (Fonts) per AutoCAD Release 12 ?"
@QString @t146 = " In quale directory si desidera di installare i file dei"
@QString @t147 = " set di caratteri per AutoShade / AutoSketch ?"
@QString @t148 = " Quale dimensione di caratteri per i programmi AutoCAD e AutoShade ?"
@QString @t152 = "  Programmi d'applicazione supportati:"
@QString @t153 = "  Prima dell'installazione dei driver @B, i relativi programmi"
@QString @t154 = "  d'applicazione devono essere già stati installati."
@QString @t161 = "  Nel corso dell'installazione sarà pregato di inserire su quale unità disco"
@QString @t162 = "  ed in quale directory è attualmente installato il programma per il quale"
@QString @t163 = "  si desidera di installare dei driver (eccezione: AutoCAD Rel.11)."
@QString @t164 = "  INFORMAZIONI SULL'USO DELLA TASTIERA:"
@QString @t165 = "  Se il nome della directory sostenuto nel riquadro dialogato è giusto,"
@QString @t166 = "  azionare  [─┘]  per continuare."
@QString @t167 = "  Se il programma d'applicazione è installato in una directory diversa,"
@QString @t168 = "  azionare il TASTO INDIETRO  [─-]  ed inserire il nome giusto della"
@QString @t169 = "  directory. Azionare  [─┘]  per continuare."
@QString @t16a = "  Se ha sbagliato indicando un'unità disco / una directory, azionare"
@QString @t16b = "  ancora  [─┘]  per ripetere l'inserzione."
@QString @t16c = "  La terminazione dell'installazione è sempre possibile con il tasto [Esc]."
@QString @t171 = "  Selezionare i programmi per i quali si desidera di installare dei driver."
@QString @t172 = "  ATTENZIONE:  Se questo programma d'installazione viene eseguito PER LA"
@QString @t173 = "               PRIMA VOLTA, selezionare \"@B Utilities\" per di più."
@QString @t174 = "       Con i tasti [] e [] è possibile di muovere la trave illuminata."
@QString @t175 = "       Con la  BARRA SPAZIATRICE  è possibile di attivare e disattivare"
@QString @t176 = "       il driver raffigurato in modo invertito.  Continuare con [─┘]."
@QString @t177 = "           Non venne selezionato un driver per l'installazione !"
@QString @t181 = " Nel presente sistema è disponibile memoria EMS (Extended Memory). Deve"
@QString @t182 = " essere utilizzata la versione EMS del driver @B per DataCAD ?"
@QString @y = " SI "
@QString @n = " NO "
@QString @t191 = " Se si desidera far uso della funzione screen save (caricare e salvare"
@QString @t192 = " la visualizzazione schermo), scegliere il driver maggiore."
@QString @t193 = " In caso contrario, scegliere il driver minore."
@QString @t194 = "Generic CADD, driver minore  "
@QString @t195 = "Generic CADD, driver maggiore"
@QString @t201 = "      Indicare la directory nella quale i \"@B Utilities\""
@QString @t202 = "      devono essere installati."
@QString @t203 = "      La directory standard è: @SubDir"
@QString @t204 = "Continuare con l'installazione"
@QString @t205 = " dei \"@B Utilities\" in questa directory ?"
@QString @t251 = " Su quale unità disco sono installati i \"@B Utilities\" ?"
@QString @t252 = " In quale directory sono installati i \"@B Utilities\" ?"
@QString @t253 = "non contiene i \"@B Utilities\"."
@QString @t254 = "non esiste."
@QString @t300 = " Non posso trovare i \"@B Utilities\" nella directory"
@QString @t301 = " Se non sono installati i \"@B Utilities\", azionare [Esc]."
@QString @t320 = " NOTA:      Installazione dei driver per Windows"
@QString @t323 = " Dopo la fine del programma d'installazione in corso, inserire"
@QString @t321 = " il disco \"Drivers for Windows\", per favore, ed inserire:"
@QString @t322 = " README  [─┘]"
@QString @Driver = "Driver"
@QString @for = "per"
@Endif
@EndVars

@If (@Com(1) == 744 || @Com(2) == 744 || @Com(3) == 744 || @Com(4) == 744)
 @If (@L == 2)
@Display @Cls

     Warnung:  INSTALL hat einen möglichen Adressenkonflikt in Ihrem
     System bei Adresse 2E8h festgestellt (diese Adresse ist allgemein
     als COM4 reserviert). Wenn in Ihrem System ein Modem, Fax/Modem
     oder eine Soundkarte in Betrieb ist, kann eine Inkompatibilität
     mit der @B vorliegen.

     (Einige Peripheriegeräte verwenden diese im allgemeinen unbenutzte
     Adresse, obwohl die AT-Busspezifikation sie für Graphiksubsysteme
     vorsieht.)

     Es wird empfohlen, INSTALL jetzt abzubrechen und das betrefffende
     Peripheriegerät auf eine andere Adresse umzukonfigurieren, z.B.
     COM1 oder COM2. Dies kann durch Jumper oder Schalter auf dem Gerät
     erfolgen, oder mit Hilfe eines Dienstprogrammes.

   @Pause
   @Cls

     Wenn Sie INSTALL nicht abbrechen, können Sie zwar fortfahren, aber
     Sie werden nicht die besonderen Vorteile Ihrer @B nutzen
     können, bis dieser Konflikt beseitigt ist. Möglicherweise treten
     Bild-Darstellungsprobleme unter Windows auf und Auflösungen von
     mehr als 640x480 in 16 Farben laufen nicht korrekt.


   @Pause
@EndDisplay

 @Else // @L

@Display @Cls

     Warning:  INSTALL has detected a potential address conflict in
     your system at address space 2E8H (generally this space is
     reserved as COM4).  If you are running a modem, fax/modem
     or sound card in your system, there may be an incompatibility
     with the @B .

     (Some communication peripherals try and utilize this generally
     unused space, however the AT Bus specification reserves this space
     for graphics subsystems.)

     It is recommened that you exit the INSTALL program now and
     reconfigure the other communciation device for another address
     such as COM1 or COM2.  This can be done through jumpers or
     switches on the device, or through a software utility.


   @Pause
   @Cls



     If you do not exit INSTALL, you can continue but you will not be
     able to take full advantage of the advanced features of your
     @B until this conflict is removed.  Probably, you will
     have display problems running Windows and you will not be able
     to properly run resolutions beyond 640x480 in 16 colors.



    @Pause
@EndDisplay

 @Endif // @L
@EndIf // @Com

@FlushOptions()

nochmal:
@FlushGroups()
@SetGroup(B)
@BarOffset(1)
@ScrHead(1, M, 0, 63, "$062SPEA @Name $063@Version")
@GetGroups @Checkbox @LocalWindow (13, 39)
@t171
@t172
@t173












@t174
@t175
@t176
@Set B = "SPEA @B Utilities                  "
@Set W = "SPEA BigWin @for Windows/Windows @for Workgroups 3.1x "
@Set M = "SPEA BigMicro v2.24 @for MicroStation 4.0x "
@Set U = "SPEA BigMicro v2.34 @for MicroStation 5.0 "
//@Set A = "OS/2 2.x                              "
@Set D = "AutoCAD 11 / AutoCAD 12               "
@Set T = "AutoShade 2.1, 3DStudio 1.0/2.0       "
@Set G = "CADkey 5.0/386 - Display List         "
@Set I = "DataCAD 4.06 - Display List           "
@Set H = "CADVANCE 3.51                         "
@Set K = "Generic CADD 5.0, 6.0                 "
@Set L = "MicroStation 3.3 Real Mode            "
@Set N = "Lotus 1-2-3 V 2.3                     "
@Set O = "Lotus Symphony 2.0                    "
@Set S = "Microsoft WORD 5.0                    "
@Set J = "VersaCAD 5.3, 5.4, 7.0, 7.0/386       "
@Set V = "WordPerfect 5.1                       "
@EndGroups
@BarOffset(0)

@Display
@d8
  @If('B' [= @Group || 'A' [= @Group || 'W' [= @Group || 'D' [= @Group ||
      'G' [= @Group || 'H' [= @Group || 'I' [= @Group || 'K' [= @Group ||
      'L' [= @Group || 'M' [= @Group || 'N' [= @Group || 'O' [= @Group ||
      'S' [= @Group || 'U' [= @Group || 'J' [= @Group || 'T' [= @Group || 'V' [= @Group)
  @Else
@t177

   @Pause
   @Goto nochmal
  @Endif
@EndDisplay

utils:
@If('B'[= @Group)
@GetOutDrive @LocalWindow (17, 39)
@t121
@t011
@t012
@EndOutDrive

@GetSubDir
@t201
@t202
@t203
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@OutDrive:@SubDir")
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @OutDrive:@SubDir @t101 @t204
@t205
@t111
 @Option 0 = ""
@EndOption
 @If(0 [! @Option) @Goto utils @Endif
@Else
@Endif
@Endif // 'B'

nutils:
@If (('B' [! @Group) &&
  ('D' [= @Group || 'G' [= @Group || 'H' [= @Group || 'I' [= @Group ||
   'K' [= @Group || 'L' [= @Group || 'M' [= @Group || 'N' [= @Group ||
   'O' [= @Group || 'S' [= @Group || 'U' [= @Group || 'T' [= @Group ||
   'V' [= @Group || 'J' [= @Group || 'W' [= @Group))
@GetOutDrive @LocalWindow (17, 39)
@t251
@t011
@t012

@t301
@EndOutDrive

@GetSubdir
@t252
@Prompt = "@t091 ([─┘] = @Subdir) ? "
@LocalWindow (17, 39)
@EndSubdir

 @If(@Exists "@OutDrive:@SubDir\\@Checkfile") @Else
@Display
@d8
  @If(@Exists "@OutDrive:@SubDir")
@t081 @OutDrive:@SubDir @t253 @Else
@t081 @OutDrive:@SubDir @t254 @Endif

@Pause
@EndDisplay
@Goto nutils
 @Endif
@Endif // !'B'

@If('D' [= @Group || 'T' [= @Group)
@If('D' [= @Group)
 @ClearOption(11)
 @ClearOption(12)
@GetOption @LocalWindow (17, 39)
@t131 AutoCAD @t132
@t133
@Option 12 = "AutoCAD Release 12"
@Option 11 = "AutoCAD Release 11"
@EndOption
@Endif // 'D'

@If(11 [= @Option)
aqu11:
@If('B' [! @Group)
@GetOutDrive @LocalWindow (17, 39)
@t141
@t142
@t011
@t012
@EndOutDrive

@GetSubdir
@t143
@t142
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (17, 39)
@EndSubdir

@Endif // !'B'

@ELSEIF (12 [= @Option)
acad12:
@GetOutDrive @acad12drv @LocalWindow (17, 39)
@t041 AutoCAD Rel.12 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @acad12dir
@t051 AutoCAD Rel.12 @t042
@Prompt = "@t091 ([─┘] = @acad12dir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@acad12drv:@acad12dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @acad12drv:@acad12dir @t061

@t021
@t022
@t023
   @Option 0 = ""
   @EndOption
 @If(0 [! @Option) @Goto acad12 @Endif
@Endif

aqu12:
@If('B' [! @Group)
@GetOutDrive @LocalWindow (17, 39)
@t144
@t145
@t011
@t012
@EndOutDrive

@GetSubdir
@t146
@t145
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (17, 39)
@EndSubdir
@Endif // !'B'

@ELSE // Kein AutoCAD, nur AutoShade / 3DStudio
aqush3ds:
@If('B' [! @Group)
@GetOutDrive @LocalWindow (17, 39)
@t141
@t147
@t011
@t012
@EndOutDrive

@GetSubdir
@t143
@t147
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (17, 39)
@EndSubdir
@Endif // !'B'
@ENDIF // 11,12

@GetOption @LocalWindow (17, 39)
@t148
@t133
 @Option 230 = " 8X16.FNT"
 @Option 220 = "  6X9.FNT"
 @Option 240 = " 9X15.FNT"
 @Option 250 = "12X20.FNT"
 @Option 260 = "12X24.FNT"
 @Option 270 = "15X25.FNT"
 @Option 280 = "16X30.FNT"
@EndOption
@Endif // 'D' || 'T'

@If('G'[= @Group)
cadkey:
@GetOutDrive @ckdrv @LocalWindow (17, 39)
@t041 CADkey 5.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @ckdir
@t051 CADkey 5.0 @t042
@Prompt = "@t091 ([─┘] = @ckdir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@ckdrv:@ckdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @ckdrv:@ckdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto cadkey @Endif
@Endif

@If(@Exists "@ckdrv:@ckdir\\GRDEV.DAT")
 @System "Copy @ckdrv:@ckdir\\GRDEV.DAT @ckdrv:@ckdir\\GRDEV.BAK >nul"
@Endif
@Endif // 'G'

@If('I'[= @Group)
datacad:
@GetOutDrive @datadrv @LocalWindow (17, 39)
@t041 DataCAD 4.06 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @datadir
@t051 DataCAD 4.06 @t042
@Prompt = "@t091 ([─┘] = @datadir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@datadrv:@datadir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @datadrv:@datadir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto datacad @Endif
@Endif

@If(@Exists "@datadrv:@datadir\\DRV\\DRIVERS.GD2")
 @System "Copy @datadrv:@datadir\\DRV\\DRIVERS.GD2 @datadrv:@datadir\\DRV\\DRIVERS2.BAK >nul"
@Endif

@If(@Exists "@datadrv:@datadir\\DRV\\DRIVERS.GD4")
 @System "Copy @datadrv:@datadir\\DRV\\DRIVERS.GD4 @datadrv:@datadir\\DRV\\DRIVERS4.BAK >nul"
@Endif

@If(@ExtAvail > 0)
@GetOption @LocalWindow (17, 39)
@t181
@t182
@Option 400 = "@y"
@Option 410 = "@n"
@EndOption
@Endif
@Endif // 'I'

@If('H'[= @Group)
cadvance:
@GetOutDrive @cvandrv @LocalWindow (17, 39)
@t041 CADVANCE 3.51 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @cvandir
@t051 CADVANCE 3.51 @t042
@Prompt = "@t091 ([─┘] = @cvandir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@cvandrv:@cvandir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @cvandrv:@cvandir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto cadvance @Endif
@Endif
@Endif // 'H'

@If('K'[= @Group)
generic:
@GetOutDrive @gendrv @LocalWindow (17, 39)
@t041 Generic CADD @t042
@t011
@t012
@EndOutDrive

@GetSubdir @gendir
@t051 Generic CADD @t042
@Prompt = "@t091 ([─┘] = @gendir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@gendrv:@gendir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @gendrv:@gendir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto generic @Endif
@Endif

@GetOption @LocalWindow (17, 39)
@t191
@t192
@t193
@Option 100 = "@t194"
@Option 110 = "@t195"
@EndOption
@Endif // 'K'

@If('L'[= @Group)
ustatr:
@GetOutDrive @ustardrv @LocalWindow (17, 39)
@t041 MicroStation 3.3 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @ustardir
@t051 MicroStation 3.3 @t042
@Prompt = "@t091 ([─┘] = @ustardir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@ustardrv:@ustardir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @ustardrv:@ustardir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto ustatr @Endif
@Endif
@Endif // 'L'

@If('M'[= @Group)
ustatp:
@GetOutDrive @ustapdrv @LocalWindow (17, 39)
@t041 MicroStation 4.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @ustapdir
@t051 MicroStation 4.0 @t042
@Prompt = "@t091 ([─┘] = @ustapdir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@ustapdrv:@ustapdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @ustapdrv:@ustapdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto ustatp @Endif
@Endif
@Endif // 'M'

@If('U'[= @Group)
ustat5p:
@GetOutDrive @usta5drv @LocalWindow (20, 39)
@t041 MicroStation 5.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @usta5dir
@t051 MicroStation 5.0 @t042
@Prompt = "@t091 ([─┘] = @usta5dir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@usta5drv:@usta5dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @usta5drv:@usta5dir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto ustat5p @Endif
@Endif
@Endif /* 'U' */

@If('N'[= @Group)
lotus:
@GetOutDrive @lotusdrv @LocalWindow (17, 39)
@t041 Lotus 1-2-3 V2.3 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @lotusdir
@t051 Lotus 1-2-3 V2.3 @t042
@Prompt = "@t091 ([─┘] = @lotusdir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@lotusdrv:@lotusdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @lotusdrv:@lotusdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto lotus @Endif
@Endif
@Endif // 'N'

@If('O'[= @Group)
symphony:
@GetOutDrive @symdrv @LocalWindow (17, 39)
@t041 Symphony 2.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @symdir
@t051 Symphony 2.0 @t042
@Prompt = "@t091 ([─┘] = @symdir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@symdrv:@symdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @symdrv:@symdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto symphony @Endif
@Endif
@Endif // 'O'

@If('S'[= @Group)
word:
@GetOutDrive @worddrv @LocalWindow (17, 39)
@t041 WORD 5.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @worddir
@t051 WORD 5.0 @t042
@Prompt = "@t091 ([─┘] = @worddir)? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@worddrv:@worddir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @worddrv:@worddir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto word @Endif
@Endif

@If(@Exists "@worddrv:@worddir\\SCREEN.VID")
 @System "Copy @worddrv:@worddir\\SCREEN.VID @worddrv:@worddir\\SCREEN.ORG >nul"
@Endif
@Endif // 'S'

@If('J'[= @Group)
@GetOption @LocalWindow (17, 39)
@t131 VersaCAD
 @t132
@t133
 @Option 10 = "VersaCAD 5.3                    "
 @Option 20 = "VersaCAD 5.4, 6.0, 7.0 Real Mode"
 @Option 30 = "VersaCAD 7.0      Protected Mode"
@EndOption

versacad:
@GetOutDrive @versadrv @LocalWindow (17, 39)
@t041 VersaCAD @t042
@t011
@t012
@EndOutDrive

@If
(10 [= @Option) @GetSubdir @versa53dir @Elseif
(20 [= @Option) @GetSubdir @versa54dir @Elseif
(30 [= @Option) @GetSubdir @versa386dir @Endif
 @LocalWindow (17, 39)
@t051 VersaCAD @t042
@If(10 [= @Option) @Prompt = "@t091 ([─┘] = @versa53dir)? "  @Endif
@If(20 [= @Option) @Prompt = "@t091 ([─┘] = @versa54dir)? "  @Endif
@If(30 [= @Option) @Prompt = "@t091 ([─┘] = @versa386dir)? " @Endif
 @EndSubdir

@If(10 [= @Option)
 @If(@Exists "@versadrv:@versa53dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @versadrv:@versa53dir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto versacad @Endif
@Endif

@ElseIf (20 [= @Option)
 @If(@Exists "@versadrv:@versa54dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @versadrv:@versa54dir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto versacad @Endif
@Endif

@ElseIf (30 [= @Option)
 @If(@Exists "@versadrv:@versa386dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @versadrv:@versa386dir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto versacad @Endif
@Endif
@Endif // 10,20,30
@Endif // 'J'

@If('V'[= @Group)
wp:
@GetOutDrive @wpdrv @LocalWindow (17, 39)
@t041 WordPerfect 5.1 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @wpdir
@t051 WordPerfect 5.1 @t042
@Prompt = "@t091 ? "
@LocalWindow (17, 39)
@EndSubdir

@If(@Exists "@wpdrv:@wpdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (17, 39)
@t081 @wpdrv:@wpdir @t061

@t021
@t022
@t023
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto wp @Endif
@Endif
@Endif // 'V'

@If ('W' [= @Group)
@If("@StartupDir" == "\\")
@Display

@t320


@t323
@t321

    @t322
@d8
@Pause
@EndDisplay
@Endif // @StartupDir
@Endif // 'W'

@DefineDisk
    @Label = "Disk 1 of 1"
@If(@L==2) @F README.GER @O README @Else @F README.ENG @O README @Endif
@F     SHOW.EXE
//@F    INIT1.BAT

@If(@L==2)
 @F DPMS.GER @O DPMS.DOC @Group b
@Else
 @F DPMS.ENG @O DPMS.DOC @Group b
@Endif

@If(@L==2)
 @F MAILBOX.GER @O MAILBOX.DOC @Group b
@Else
 @F MAILBOX.ENG @O MAILBOX.DOC @Group b
@Endif


        @BeginLib V7-MIR.LIF

// Utilities:

@F V7MIRVBE.EXE @Group b
@F   S3TEST.EXE @Group b
@F    SMODE.EXE @Group b
//@F   S3INIT.EXE @Group b
@F       CR.EXE @Group b
//@F     EFIX.EXE @Group b
@F  V7HFREQ.COM @Group b
//@F  V7HFREQ.TIM @Group b
@If(@L==2) @F MNTMIR-D.BAT @O MNTMIR.BAT @Group b @ElseIf(@L==1) @F MNTMIR-E.BAT @O MNTMIR.BAT @Group b @ElseIf(@L==3) @F MNTMIR-F.BAT @O MNTMIR.BAT @Group b @ElseIf(@L==5) @F MNTMIR-I.BAT @O MNTMIR.BAT @Group b @Endif

/*
 @F   SPTUNE.EXE @Group b
@If(@L==2)
 @F   SPTUNE.GHP  @O   SPTUNE.HLP @Group b
 @F   SPTUNE.GER  @O   SPTUNE.TCO @Group b
@Else
 @F   SPTUNE.EHP  @O   SPTUNE.HLP @Group b
 @F   SPTUNE.ENG  @O   SPTUNE.TCO @Group b
@Endif

 @F  BIT6X15.FNT  @O fonts\\BIT6X15.FNT  @Group b
 @F COU15X25.FNT  @O fonts\\COU15X25.FNT @Group b
 @F  COU9X16.FNT  @O fonts\\COU9X16.FNT  @Group b
 @F     SANS.CHR  @O fonts\\SANS.CHR     @Group b
/**/

// Aquila-Treiber für AutoCAD 11 , AutoShade, 3D Studio:
@F     ACAD.ENG @O ACAD.DOC @Group dt

@F   RCP_S3.EXP @Option 11 @Group d
@F      IBM.LGO @Option 11 @Group d
@F       HP.LGO @Option 11 @Group d
@F   NEWS3I.LGO @Option 11 @Group d
@F   AQUILA.LGO @Option 11 @Group d
// Aquila-Treiber für AutoCAD 12 , AutoShade, 3D Studio:
@F   RCP_S3.EXP @O @acad12drv:@acad12dir\\drv\\RCP_S3.EXP  @Option 12 @Group d
@F      IBM.LGO @O @acad12drv:@acad12dir\\drv\\IBM.LGO     @Option 12 @Group d
@F       HP.LGO @O @acad12drv:@acad12dir\\drv\\HP.LGO      @Option 12 @Group d
@F   NEWS3I.LGO @O @acad12drv:@acad12dir\\drv\\NEWS3I.LGO  @Option 12 @Group d
@F   AQUILA.LGO @O @acad12drv:@acad12dir\\drv\\AQUILA.LGO  @Option 12 @Group d
// Aquila-Treiber nur für AutoShade, 3D Studio:
       @If('D' [! @Group)
@F   RCP_S3.EXP @Group t
@F      IBM.LGO @Group t
@F       HP.LGO @Group t
@F   NEWS3I.LGO @Group t
@F   AQUILA.LGO @Group t
       @Endif
// Fonts für AutoCAD, AutoShade:
@F    12x20.FNT @O fonts\\12x20.FNT    @Group dt
@F    12X24.FNT @O fonts\\12x24.FNT    @Group dt
@F    15X25.FNT @O fonts\\15x25.FNT    @Group dt
@F    16X30.FNT @O fonts\\16x30.FNT    @Group dt
@F      6X9.FNT @O fonts\\6x9.FNT      @Group dt
@F     8X16.FNT @O fonts\\8x16.FNT     @Group dt
@F     9X15.FNT @O fonts\\9x15.FNT     @Group dt
// CADkey:
@F CK_911.EXE       @O @ckdrv:@ckdir\\CK_911.EXE @Group g
@If(@Exists "@ckdrv:@ckdir\\GRDEV.DAT")
@F GRDEV.DAT    @AppendTo @ckdrv:@ckdir\\GRDEV.DAT @Group g
@Else     @F GRDEV.DAT         @O @ckdrv:@ckdir\\GRDEV.DAT @Group g
@Endif
// DataCAD:
@If(@Exists "@datadrv:@datadir\\DRV\\DRIVERS.GD2")
@F DRIVERS.GD2  @Appendto @datadrv:@datadir\\drv\\DRIVERS.GD2 @Group i
@Else     @F DRIVERS.GD2       @O @datadrv:@datadir\\drv\\DRIVERS.GD2 @Group i
@Endif
@If(@Exists "@datadrv:@datadir\\DRV\\DRIVERS.GD4")
@F DRIVERS.GD4  @Appendto @datadrv:@datadir\\drv\\DRIVERS.GD4 @Group i
@Else     @F DRIVERS.GD4       @O @datadrv:@datadir\\drv\\DRIVERS.GD4 @Group i
@Endif
@If(400 [= @Option) // EMS Version von DataCAD gewählt:
@F DL_911.EXE   @O @datadrv:@datadir\\drv\\DL_911.EXE @Group i
@Else     @F CK_911.EXE   @O @datadrv:@datadir\\drv\\CK_911.EXE @Group i
@Endif
// CADVANCE:
@F CDV911.DRV   @O @cvandrv:@cvandir\\GS.DRV  @Group h
@F CAD.RND      @O @cvandrv:@cvandir\\CAD.RND @Group h
// Generic CADD:
@If(@L==2) @F GCAD.GER @O GCAD.DOC @Group k @Else @F GCAD.ENG @O GCAD.DOC @Endif
@F LGEN911.VGD  @O @gendrv:@gendir\\LGEN911.VGD @Option 110 @Group k
@F SGEN911.VGD  @O @gendrv:@gendir\\SGEN911.VGD @Option 100 @Group k
// Lotus 1-2-3:
@F 123D600.DRV  @O @lotusdrv:@lotusdir\\123D600.DRV  @Group n
@F 123D768.DRV  @O @lotusdrv:@lotusdir\\123D768.DRV  @Group n
@F 123S600.DRV  @O @lotusdrv:@lotusdir\\123S600.DRV  @Group n
@F 123S768.DRV  @O @lotusdrv:@lotusdir\\123S768.DRV  @Group n
@F 123TXT43.DRV @O @lotusdrv:@lotusdir\\123TXT43.DRV @Group n
@F 123TEXT.DRV  @O @lotusdrv:@lotusdir\\123TEXT.DRV  @Group n
@F 123TXT25.DRV @O @lotusdrv:@lotusdir\\123TXT25.DRV @Group n
// Symphony:
@F 123D600.DRV  @O @symdrv:@symdir\\123D600.DRV  @Group o
@F 123D768.DRV  @O @symdrv:@symdir\\123D768.DRV  @Group o
@F 123S600.DRV  @O @symdrv:@symdir\\123S600.DRV  @Group o
@F 123S768.DRV  @O @symdrv:@symdir\\123S768.DRV  @Group o
@F 123TXT43.DRV @O @symdrv:@symdir\\123TXT43.DRV @Group o
@F 123TEXT.DRV  @O @symdrv:@symdir\\123TEXT.DRV  @Group o
@F 123TXT25.DRV @O @symdrv:@symdir\\123TXT25.DRV @Group o
// MicroStation Real Mode:
@F REMOVE.EXE   @Group l
@F REMOVE.EXE   @O @ustardrv:@ustardir\\drivers\\REMOVE.EXE  @Group l
@F MGLS3.EXE    @O @ustardrv:@ustardir\\drivers\\MGLS3.EXE   @Group l
@F MGLS3.MGL    @O @ustardrv:@ustardir\\drivers\\MGLS3.MGL   @Group l
// MicroStation Protected Mode:
@If(@L==2) @File BIGMICRO.GER @Out BIGMICRO.DOC @Group mu @Else @File BIGMICRO.ENG @Out BIGMICRO.DOC @Group mu @Endif
          @File    VMODE.EXE @Group mu
// MicroStation 4.0x:
@F  MSPEAS3.EXP @O @ustapdrv:@ustapdir\\drivers\\MSPEAS3.EXP @Group m
@F   MSSPEA.MA  @O @ustapdrv:@ustapdir\\drivers\\MSSPEA.MA   @Group m
@F   MSSPEA.MGL @O @ustapdrv:@ustapdir\\drivers\\MSSPEA.MGL  @Group m
// MicroStation 5.0:
          @File  MSPEAS3.MGL @Out @usta5drv:@usta5dir\\drivers\\MSPEAS3.MGL @Group u
          @File  MSPEAS3.MA  @Out @usta5drv:@usta5dir\\drivers\\MSPEAS3.MA  @Group u
          @File  MSPEAS3.DLM @Out @usta5drv:@usta5dir\\drivers\\MSPEAS3.DLM @Group u
// VersaCAD:
@If(@L==2) @F VERSACAD.GER @O VERSACAD.DOC @Group j @Else @F VERSACAD.ENG @O VERSACAD.DOC @Group j @Endif
@F REMOVE.EXE   @Group j
          @F VC2_911.COM  @O @versadrv:@versa53dir\\VC2_911.COM   @Option 10 @Group j
@F VCAD53.CFG   @O @versadrv:@versa53dir\\ENVIRO.CFG    @Option 10 @Group j
@F REMOVE.EXE   @O @versadrv:@versa53dir\\REMOVE.EXE    @Option 10 @Group j
          @F VC2_911.COM  @O @versadrv:@versa54dir\\VC2_911.COM   @Option 20 @Group j
@F VCAD54.CFG   @O @versadrv:@versa54dir\\ENVIRO.CFG    @Option 20 @Group j
@F REMOVE.EXE   @O @versadrv:@versa54dir\\REMOVE.EXE    @Option 20 @Group j
          @F VC3_911.COM  @O @versadrv:@versa386dir\\VC3_911.COM  @Option 30 @Group j
@F VCAD386.CFG  @O @versadrv:@versa386dir\\ENVIRO.CFG   @Option 30 @Group j
@F REMOVE.EXE   @O @versadrv:@versa386dir\\REMOVE.EXE   @Option 30 @Group j
// MS-WORD:
@If(@L==2) @F WORD.GER @O WORD.DOC @Group s @Else @F WORD.ENG @O WORD.DOC @Group s @Endif
@F SCREEN.VID   @O @worddrv:@worddir\\SCREEN.VID @Group s
// WordPerfect:
@F WPGRAPH.VRS  @O @wpdrv:@wpdir\\WPGRAPH.VRS @Group v
@F WPTEXT.VRS   @O @wpdrv:@wpdir\\WPTEXT.VRS  @Group v
     @EndLib
@EndDisk


@If("@StartupDir" != "\\") //////////////////////////////////////////////////////
@DefineVars @QString @FName = "CONTINUE" @EndVars

AGAIN:
@GetString @FName @Cls @LocalWindow(20, 39)
@If(@L==2)
 Zur Fortsetzung der Installation wird im Hauptverzeichnis Ihres Start-
 laufwerkes ( normalerweise in C:\ ) ein Hilfsprogramm erzeugt.

 Der vorgegebene Name des Hilfsprogrammes lautet: @FName
 Drücken Sie RETURN, wenn Sie diesen Namen übernehmen wollen.

 Wenn Sie einen anderen Namen wünschen, ändern Sie den Namen
 im grünen Eingabefeld. Beachten Sie bitte, daß maximal 8 Buchstaben
 zulässig sind. Drücken Sie anschließend RETURN.
@Prompt = " Welcher Name? "
@Else // @L
 To continue installation, an auxiliary program will be created in the
 root directory of your boot drive ( normally in C:\ ).

 The default name of the auxiliary program is: @FName
 Press RETURN if you want to confirm this name.

 If you prefer a different name, change the name in the green
 dialog box. Please note that 8 characters is the maximum name length.
 After this, press RETURN.
@Prompt = " Which name? "
@Endif // @L
@EndString

@If(@StrLen("@FName") < 1)
 @FName = "CONTINUE"
 @Goto AGAIN
@Endif

@If(@StrLen("@FName") > 8)
@Display
@If(@L==2)
 Der Name @FName ist zu lang.
 Es sind höchstens 8 Buchstaben zulässig.
@Else // @L
 The name @FName is too long.
 The maximum length is 8 characters.
@Endif // @L
@Pause
@EndDisplay
@FName = "@StrHead("@FName", 8)"
@Goto AGAIN
@Endif // @StrLen

@If(@Exists("@BootDrive:\\@FName.@FExt"))
@SetOption(0)
@GetOption @Checkbox @LocalWindow(22, 39)
@If(@L==2)
 Die Datei @BootDrive:\@FName.@FExt existiert bereits.
 Darf ich diese Datei überschreiben?

 Anmerkung:
 Wenn die Datei während einer vorhergehenden SPEA CD-ROM Installation
 erzeugt wurde, darf die Datei jetzt überschrieben werden.
 Falls Sie jedoch wünschen, daß diese Datei nicht überschrieben wird,
 wählen Sie bitte NEIN.

 Wählen Sie JA/NEIN mit der LEERTASTE. Drücken Sie [RETURN] zu Fortsetzung.
@Else // @L
 The file @BootDrive:\@FName.@FExt already exists.
 May I overwrite this file?

 Note:
 If this file was created during a previous SPEA CD ROM installation,
 the file may be overwritten now.
 However, if you wish not to overwrite this file, please select NO.

 Select YES/NO with the SPACE BAR. Press [ENTER] to continue.
@Endif // @L
@Option 0 = ""
@EndOption
@If(0 [! @Option) @Goto AGAIN @Endif
@Endif // @Exists
@Endif // @StartupDir /////////////////////////////////////////////////////////

@If('B' [= @Group)
@Display
@If(@L==2)
 Ihre Datei AUTOEXEC.BAT wird nun überprüft und, falls nötig, modifiziert.
 Keine Sorge - das Original wird zuvor gesichert in der Datei:
@Else // @L
 Your AUTOEXEC.BAT file will now be checked and modified, if required.
 Don't worry - before this, the original will be saved in the file:
@Endif // @L
            AUTOEXEC.CPY

@Pause
@EndDisplay

@SetAutoexec @OverWrite
@SetReplace("GDC", "@OutDrive:@SubDir")
@Verbatim "@OutDrive:@SubDir\\V7MIRVBE.EXE"
@EndAutoexec
@Endif // 'B'

@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"

@If('U' [= @Group || 'M' [= @Group)
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "wt", "@@echo off\n")
@If(@L==2)
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem Für S3-EINSCHIRMLÖSUNG:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "SET MSPEAPM=-c10 -v0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 steht für die gewünschte oder mögliche Auflösung)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "\nrem Für GRAPHITI-S3-ZWEISCHIRMLÖSUNG:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem SET MSPEAPM=-c0 -v0 -lc10 -lv0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 bzw. -lv0 steht für die gewünschte oder mögliche Auflösung)\n")
@Else // 2
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem For S3 SINGLE SCREEN:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "SET MSPEAPM=-c10 -v0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 signifies the desired or possible resolution)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "\nrem For GRAPHITI-S3 DUAL SCREEN:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem SET MSPEAPM=-c0 -v0 -lc10 -lv0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 resp. -lv0 signifies the desired or possible resolution)\n")
@Endif // 2
@Endif // 'U' || 'M'

@If('D' [= @Group || 'T' [= @Group)
@If(11 [= @Option)
  @Write("V7ACAD.BAT", "wt", "SET DSPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
@Endif
@If(11 [= @Option && 'T' [= @Group)
  @Write("V7ACAD.BAT", "at", "SET RCPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RDPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
@Endif
@If(12 [= @Option)
  @Write("V7ACAD.BAT", "wt", "SET ACADDRV=@acad12drv:@acad12dir\\DRV\n")
@Endif
@If(12 [= @Option && 'T' [= @Group)
  @Write("V7ACAD.BAT", "at", "SET DSPADI=@acad12drv:@acad12dir\\DRV\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RCPADI=@acad12drv:@acad12dir\\DRV\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RDPADI=@acad12drv:@acad12dir\\DRV\\RCP_S3.EXP\n")
@Endif
@If(11 [! @Option && 12 [! @Option && 'T' [= @Group)
  @Write("V7ACAD.BAT", "wt", "SET DSPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RCPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RDPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
@Endif
@If(220 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\6X9.FNT\n")   @Endif
@If(230 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\8X16.FNT\n")  @Endif
@If(240 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\9X15.FNT\n")  @Endif
@If(250 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\12X20.FNT\n") @Endif
@If(260 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\12X24.FNT\n") @Endif
@If(270 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\15X25.FNT\n") @Endif
@If(280 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\16X30.FNT\n") @Endif
@Endif // 'D' || 'T'

@If('B' [= @Group)
 @Write ("@OutDrive:\\@SubDir\\setgdc.bat", "wt", "SET GDC=@OutDrive:@SubDir\n")
@Endif

@If(@System "show readme") @Endif
@Cls

@Write ("@OutDrive:\\@SubDir\\init.bat", "wt", "@@echo off\n")
@Write ("@OutDrive:\\@SubDir\\init.bat", "at", "@OutDrive:\n")
@Write ("@OutDrive:\\@SubDir\\init.bat", "at", "CD @SubDir\n")
@Write ("@OutDrive:\\@SubDir\\init.bat", "at", "SET GDC=@OutDrive:@SubDir\n")

@If('B' [= @Group)
 @Write ("@OutDrive:\\@SubDir\\init.bat", "at", "V7MIRVBE\n")
@Endif // 'B'

@If("@StartupDir" != "\\") ////////////////////////////////////////////////////
 @Copy("@OutDrive:@SubDir\\init.bat", "@BootDrive:\\@FName.BAT")

@If('W' [= @Group)
 @Write ("@BootDrive:\\@FName.BAT", "at", "@InDrive:\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "CD \\SPEA\\INSTALL\\MIRAGE\n")

@If(@L==2)
 @Write ("@BootDrive:\\@FName.BAT", "at", "WIN @InDrive:\\SPEA\\INSTALL\\MIRAGE\\V7SETUP\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO Wollen Sie SPEAenergy installieren, das DPMS-Programm von SPEA (J/N)?\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "FRAGE\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL 107 GOTO END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL 106 WIN @InDrive:\\SPEA\\INSTALL\\MIRAGE\\SPENERGY\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL  75 GOTO END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL  74 WIN @InDrive:\\SPEA\\INSTALL\\MIRAGE\\SPENERGY\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", ":END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO SPEA Software Installation beendet.\n")
@Else
 @Write ("@BootDrive:\\@FName.BAT", "at", "WIN @InDrive:\\SPEA\\INSTALL\\MIRAGE\\V7SETUP\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO Do you want to install SPEAenergy, the DPMS program made by SPEA (Y/N)?\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "FRAGE\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL 122 GOTO END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL 121 WIN @InDrive:\\SPEA\\INSTALL\\MIRAGE\\SPENERGY\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL  90 GOTO END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL  89 WIN @InDrive:\\SPEA\\INSTALL\\MIRAGE\\SPENERGY\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", ":END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO SPEA software installation finished.\n")
@Endif // @L
@Endif // 'W'
 @Write ("@BootDrive:\\@FName.BAT", "at", "@InDrive:\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "CD \\\n")

@If(@L==2)
 FORTSETZUNG DER INSTALLATION:
 -----------------------------

 1. Beenden Sie nun das aktuelle Programm.

 2. Falls Windows aktiv ist: Beenden Sie Windows!

 3. Starten Sie anschließend   @BootDrive:\@FName   zur Fortsetzung.
@Else // @L
 CONTINUATION OF INSTALLATION:
 -----------------------------

 1. Terminate the current program.

 2. If Windows is active: Terminate Windows!

 3. After this, start   @BootDrive:\@FName   to continue.
@Endif // @L
@Pause
@Endif // @StartupDir /////////////////////////////////////////////////////////

@ChDrive @InDrive
@EndFinish