Media Gallery 1995 June/MG6.ISO/spea/install/merlite/install.dat

Text File | 1995-04-06 | 49.8 KB | 1,481 lines

@DefineProject
 @Name     = "SPEA V7-MERCURY Lite PCI Superdisk"
 @Version  = "Release 0694.2"
 @OutDrive = C
 @Subdir   = "\\SPEA\\GDC"
 @Requires @HardDisk
 @Immediate = 1
@EndProject

@DefineVars
 @QString @FExt = "BAT"
 @QString @B = "V7-MERCURY Lite PCI"
 @QString @Checkfile = "S3TEST.EXE"
 @QString @d8 = "\n\n\n\n\n\n\n\n"
 @Drive @acad12drv = C
 @Dir @acad12dir = "\\ACAD"
 @Drive @ckdrv = C
 @Dir @ckdir = "\\CADKEY"
 @Drive @cvandrv = C
 @Dir @cvandir = "\\CADVANCE"
 @Drive @gendrv = C
 @Dir @gendir = "\\CADD6"
 @Drive @ustapdrv = C
 @Dir @ustapdir = "\\USTATION"
 @Drive @lotusdrv = C
 @Dir @lotusdir = "\\123"
 @Drive @symdrv = C
 @Dir @symdir = "\\SYM"
 @Drive @worddrv = C
 @Dir @worddir = "\\WORD"
 @Drive @wpdrv = C
 @Dir @wpdir = "\\WP"
@If(@L==1)
@QString @t011 = " Use the keys [] and [] to select a drive. Press [─┘] to continue."
@QString @t012 = " "
@QString @t021 = " Use the SPACE BAR to select YES or NO."
@QString @t022 =
" Press [─┘] to continue and create this directory (if YES)
 or to modify the last input (if NO)."
@QString @t031 =
" For more information about the configuration of drivers, please refer
 to the @B manual and to the README file at the end
 of this installation.
 "
@QString @t041 = " On which disk drive is"
@QString @t042 = "installed at present?"
@QString @t051 = " In which directory is"
@QString @t061 = "does not exist. Do you want to create it?"
@QString @t071 = " The installation of"
@QString @t072 = "has been prepared successfully."
@QString @t081 = " Directory"
@QString @t091 = " Which directory"
@QString @t101 = "already exists."
@QString @t102 = " Do you want to continue installing in this directory?"
@QString @t111 = " Use the SPACE BAR to select YES or NO. Press [─┘] to continue."
@QString @t121 =
" On which disk drive do you want to install
 the \"@B Utilities\" ?"
@QString @t131 = " For which version of"
@QString @t132 =
"\n do you want to install @B drivers?"
@QString @t133 = " Use the keys [] and [] to select. Press [─┘] to continue."
@QString @t141 =
" On which disk drive do you want to install the @B driver"
@QString @t142 = " and the font files for AutoCAD release 11 ?"
@QString @t143 =
" In which directory do you want to install the @B driver"
@QString @t144 = " On which disk drive do you want to install the font files"
@QString @t145 = " for AutoCAD Release 12 ?"
@QString @t146 = " In which directory do you want to install the font files"
@QString @t147 = " and the font files for AutoShade / 3DStudio ?"
@QString @t148 = " Which font size do you want to use in AutoCAD and AutoShade ?"
@QString @t152 = "    Supported applications:"
@QString @t153 =
"    Prior to the installation of the @B drivers,
    the corresponding applications must be already installed."
@QString @t161 =
"  During installation you will be asked to specify on which disk drive and
  in which directory the corresponding application is installed at present
  (exception: AutoCAD Rel. 11)."
@QString @t164 =
"  INFORMATION ON HOW TO USE YOUR KEYBOARD:

  If the default directory name in the entering field is correct, press
  the RETURN key [─┘] to continue.
  If the application is installed in a different directory, press the
  BACKSPACE key [─-] and enter the right directory name. Then press [─┘].
 "
@QString @t16a =
"  If you entered a false drive/directory name :
  press again [─┘] to repeat the entry.
  You can abort the installation at any time by pressing the [Esc] key.




  Do you want to continue the @B installation?"
@QString @t16e = "Continue"
@QString @t16f = " Finish "
@QString @t171 =
"       Select the applications for which you want to install drivers.
        ATTENTION: If this installation program is being executed for
        the FIRST TIME, also select \"@B Utilities\"."
@QString @t174 = "         Use the []  and []  keys to move the cursor up and down."
@QString @t175 =
"         Use the SPACE BAR  to activate or deactivate installation of
         the driver at the cursor position. Press [─┘] when finished."
@QString @t177 = "            No driver was selected for installation!"
@QString @t181 =
" There is EMS (Extended Memory) available on your system. Do you want
 to make use of the EMS version of the @B DataCAD driver?"
@QString @y = "YES "
@QString @n = "NO  "
@QString @t191 =
"            If you want to make use of the screen save function
            (load screen/save screen), select the big driver version.
            If not, select the small driver version."
@QString @t194 = "Generic CADD small driver version"
@QString @t195 = "Generic CADD big driver version  "
@QString @t201 =
" Please enter the directory in which you want to install
 the \"@B Utilities\".
 The standard name of the directory is: @SubDir
 "
@QString @t204 =
"Do you want to continue installing
 the \"@B Utilities\" in this directory?"
@QString @t251 =
" On which disk drive did you install the \"@B Utilities\" ?"
@QString @t252 =
" In which directory did you install the \"@B Utilities\" ?"
@QString @t253 =
"does not contain the \"@B Utilities\"."
@QString @t254 = "does not exist."
@QString @t300 =
" Cannot find the \"@B Utilities\" in directory"
@QString @t301 =
" If the \"@B Utilities\" are not installed, press [Esc]."
@QString @t320 =
"  NOTE:      Driver installation for Windows

  After the end of the current installation procedure,
  please insert disk \"Drivers for Windows\" and type:

  README  [─┘]"
@Endif
@If (@L==2)
@QString @t011 = " Mit den Tasten [] und [] können Sie ein Laufwerk auswählen."
@QString @t012 = " Bestätigen Sie mit [─┘]."
@QString @t021 = " Wählen Sie JA oder NEIN mit der LEERTASTE."
@QString @t022 =
" Drücken Sie [─┘] zur Fortsetzung (Verzeichnis wird erzeugt, wenn JA)
 oder zur Änderung der letzten Eingabe (wenn NEIN)."
@QString @t031 =
" Weitere Informationen zur Treiberkonfiguration entnehmen Sie
 bitte dem @B Handbuch und der Datei README
 am Ende dieser Installation.
 "
@QString @t041 = " Auf welchem Laufwerk ist"
@QString @t042 = "derzeit installiert?"
@QString @t051 = " In welchem Verzeichnis ist"
@QString @t061 = "existiert nicht. Wollen Sie es erzeugen ?"
@QString @t071 = " Die Installation von"
@QString @t072 = "wurde erfolgreich vorbereitet."
@QString @t081 = " Verzeichnis"
@QString @t091 = " Welches Verzeichnis"
@QString @t101 = "existiert bereits."
@QString @t102 = " Wollen Sie die Installation in diesem Verzeichnis fortsetzen?"
@QString @t111 = " Wählen Sie JA / NEIN mit der Leertaste. Drücken Sie anschließend [─┘]."
@QString @t121 =
" Auf welchem Laufwerk wollen Sie die \"@B Utilities\"
 installieren?"
@QString @t131 = " Für welche Version von"
@QString @t132 =
"\n wollen Sie @B Treiber installieren?"
@QString @t133 = " Benutzen Sie die Tasten [] und [] zur Auswahl. Bestätigen Sie mit [─┘]."
@QString @t141 =
" Auf welches Laufwerk wollen Sie den @B Treiber und die"
@QString @t142 = " Schriftfontdateien für AutoCAD Release 11 installieren?"
@QString @t143 =
" In welches Verzeichnis wollen Sie den @B Treiber und die"
@QString @t144 = " Auf welches Laufwerk wollen Sie die Schriftfontdateien"
@QString @t145 = " für AutoCAD Release 12 installieren?"
@QString @t146 = " In welches Verzeichnis wollen Sie die Schriftfontdateien"
@QString @t147 = " Schriftfontdateien für AutoShade / 3DStudio installieren?"
@QString @t148 = " Welche Schriftfontgröße wollen Sie in AutoCAD und AutoShade nutzen?"
@QString @t152 = "    Unterstützte Anwendungen:"
@QString @t153 =
"    Vor der Installation der @B Treiber müssen
    die entsprechenden Anwendungen bereits installiert sein."
@QString @t161 =
"  Im Verlauf der Installation werden Sie aufgefordert einzugeben, auf
  welchem Laufwerk und in welchem Verzeichnis die betreffende Anwendung
  derzeit installiert ist (Ausnahme: AutoCAD Rel.11)."
@QString @t164 =
"  INFORMATION ZUR BEDIENUNG DER TASTATUR:

  Wenn der vorgegebene Verzeichnisname im Eingabefeld korrekt ist, drücken
  Sie die ENTER-Taste [─┘] zur Fortsetzung.
  Wenn die Anwendung in einem anderen Verzeichnis installiert ist, betätigen
  Sie die Rückwärtstaste [─-] und geben den richtigen Verzeichnisnamen ein.
  Drücken Sie anschließend [─┘]."
@QString @t16a =
"  Wenn Sie versehentlich ein falsches Laufwerk/Verzeichnis eingegeben haben:
  drücken Sie nochmals [─┘], um die Eingabe zu wiederholen.
  Ein Abbruch der Installation ist jederzeit mit der Taste [Esc] möglich.




  Wollen Sie die @B Installation fortsetzen ?"
@QString @t16e = "Fortsetzen"
@QString @t16f = " Beenden  "
@QString @t171 =
"   Wählen Sie die Anwendungen, für die Treiber installiert werden sollen.
   ACHTUNG:   Wenn dieses Installationsprogramm zum ERSTEN MAL ausgeführt
              wird, wählen Sie zusätzlich \"@B Utilities\"."
@QString @t174 = "       Mit den Tasten [] und [] können Sie den Auswahlbalken bewegen."
@QString @t175 =
"       Mit der LEERTASTE können Sie den invers dargestellten Treiber
       zur Installation aktivieren/deaktivieren. Fortsetzung mit [─┘]."
@QString @t177 = " Es wurden keine Treiber zur Installation ausgewählt!"
@QString @t181 =
" Sie haben EMS (Extended Memory) in Ihrem System verfügbar.
 Wollen Sie die EMS-Version des @B DataCAD Treibers nutzen?"
@QString @y = " JA "
@QString @n = "NEIN"
@QString @t191 =
"            Wenn Sie die screen save (Bildschirm laden bzw. speichern)
            Funktion nutzen wollen, wählen Sie den großen Treiber.
            Ansonsten wählen Sie den kleinen Treiber."
@QString @t194 = "Generic CADD kleiner Treiber "
@QString @t195 = "Generic CADD großer Treiber "
@QString @t201 =
" Bitte geben Sie das Verzeichnis an,
 in dem die \"@B Utilities\" installiert werden sollen.
 Das Standardverzeichnis hierfür lautet: @SubDir"
@QString @t204 =
"Wollen Sie die Installation
 der \"@B Utilities\" in diesem Verzeichnis fortsetzen?"
@QString @t251 =
" Auf welchem Laufwerk
 haben Sie die \"@B Utilities\" installiert ?"
@QString @t252 =
" In welchem Verzeichnis
 haben Sie die \"@B Utilities\" installiert ?"
@QString @t253 =
"enthält nicht die \"@B Utilities\"."
@QString @t254 = "existiert nicht."
@QString @t300 =
" Kann die \"@B Utilities\" nicht finden im Verzeichnis
"
@QString @t301 =
" Wenn die \"@B Utilities\" nicht installiert sind,
 drücken Sie [Esc]."
@QString @t320 =
" ANMERKUNG:     Treiberinstallation für Windows

 Nach Beendigung dieses Installationsprogrammes, legen Sie bitte
 die Diskette \"Drivers for Windows\" ein und geben Sie ein:

 README  [─┘]"
@Endif
@If (@L==3)
@QString @t011 = " Sélectionnez le lecteur avec les touches [] et []. Validez avec [─┘]."
@QString @t012 = " "
@QString @t021 = " Choississez OUI ou NON avec la BARRE D'ESPACEMENT."
@QString @t022 =
" Appuyez sur [─┘] pour continuer (le répertoire sera créé en cas de OUI)
 ou pour modifier la dernière entrée (en cas de NON)."
@QString @t031 =
" Veuillez trouver dans le manuel @B et le fichier
 README à la fin de cette installation de plus amples informations
 sur la configuration du gestionnaire."
@QString @t041 = " Sur quel lecteur"
@QString @t042 = "est-il actuellement installé ?"
@QString @t051 = " Dans quel répertoire"
@QString @t061 = "n'existe pas. Souhaitez-vous le créer ?"
@QString @t071 = " L'installation de"
@QString @t072 = "a été préparée avec succès."
@QString @t081 = " Le répertoire"
@QString @t091 = " Quel répertoire"
@QString @t101 = "existe déjà."
@QString @t102 = " Souhaitez-vous poursuivre l'installation dans ce répertoire?"
@QString @t111 = " Choississez OUI/NON avec la barre d'espacement. Appuyez ensuite sur [─┘]."
@QString @t121 =
" Sur quel lecteur souhaitez-vous installer
 les \"@B Utilities\" ?"
@QString @t131 = " Pour quelle version de"
@QString @t132 = "\n souhaitez-vous installer des gestionnaires?"
@QString @t133 = " Employez les touches [] et [] pour choisir. Validez avec [─┘]."
@QString @t141 =
" Sur quel lecteur
 souhaitez-vous installer le gestionnaire @B"
@QString @t142 = " et les fichiers de caractères pour AutoCAD Release 11 ?"
@QString @t143 =
" Dans quel répertoire
 souhaitez-vous installer le gestionnaire @B"
@QString @t144 = " Sur quel lecteur souhaitez-vous installer les fichiers de caractères"
@QString @t145 = " pour AutoCAD Release 12 ?"
@QString @t146 = " Dans quel répertoire souhaitez-vous installer les fichiers de caractères"
@QString @t147 = " et les fichiers de caractères pour AutoShade / 3DStudio ?"
@QString @t148 = " Quelle taille de caractère souhaitez-vous utiliser dans AutoCAD/AutoShade ?"
@QString @t152 = "    Applications supportées:"
@QString @t153 =
"    Avant d'installer des gestionnaires @B
    il faut déjà avoir installé les applications concernées."
@QString @t161 =
"  Au cours de l'installation, vous serez prié d'indiquer sur quel lecteur
  et dans quel répertoire l'application concernée est installé actuellement.
  (exception: AutoCAD Rel.11)."
@QString @t164 =
"  INFORMATIONS SUR L'EMPLOI DU CLAVIER:

  Si le nom de répertoire prétendu dans le carré d'entrée est juste,
  appuyer sur la TOUCHE D'ENTREE [─┘] pour valider.
  Si l'application est installée dans un répertoire different, employez
  la TOUCHE ARRIERE [─-] et tapez le nom de répertoire juste.
  Appuyez ensuite sur [─┘]."
@QString @t16a =
"  Si vous avez indiqué, par mégarde, un faux lecteur/répertoire,
  appuyez sur [─┘] encore une fois pour répéter l'entrée.
  En tout temps, vous pouvez rompre l'installation en appuyant sur [Esc].




  Souhaitez-vous poursuivre l'installation @B ?"
@QString @t16e = "Poursuivre"
@QString @t16f = "  Finir   "
@QString @t171 =
" Sélectionnez les applications pour lesquelles vous souhaitez installer des
 gestionnaires. ATTENTION: En exécutant ce programme d'installation POUR LA
 PREMIERE FOIS, choississez \"@B Utilities\" de plus."
@QString @t174 = "  Avec les touches  [] et [] , vous pouvez déplacer la barre de sélection."
@QString @t175 =
"  Avec la  BARRE D'ESPACEMENT , vous pouvez activer ou désactiver pour l'in-
  stallation le gestionnaire représenté en contraste."
@QString @t177 = "  Aucun gestionnaire n'a été choisi pour l'installation!"
@QString @t181 =
" Votre système dispose de mémoire EMS (Extended Memory).
 Souhaitez-vous utiliser la version EMS
 du gestionnaire @B DataCAD ?"
@QString @y = "OUI"
@QString @n = "NON"
@QString @t191 =
" Si vous souhaitez utiliser la fonction screen save (charger ou mémoriser
 écran), choississez le grand gestionnaire.
 Sinon, choississez le petit gestionnnaire."
@QString @t194 = "Generic CADD petit gestionnaire"
@QString @t195 = "Generic CADD grand gestionnaire"
@QString @t201 =
" Veuillez indiquer le répertoire
 dans lequel les \"@B Utilities\" doivent être installés.
 Le répertoire standard est: @SubDir"
@QString @t204 =
"Souhaitez-vous poursuivre
 l'installation des \"@B Utilities\" dans ce répertoire ?"
@QString @t251 =
" Sur quel lecteur les \"@B Utilities\" sont-ils installés ?"
@QString @t252 =
" Dans quel répertoire
 les \"@B Utilities\" sont-ils installés ?"
@QString @t253 =
"ne contient pas les \"@B Utilities\"."
@QString @t254 = "n'existe pas."
@QString @t300 =
" Ne peux pas trouver \"@B Utilities\" dans répertoire
"
@QString @t301 =
" Si les \"@B Utilities\" ne sont pas installés,
 appuyer sur [Esc]."
@QString @t320 =
" REMARQUE:       Installation de gestionnaires pour Windows

 Après la fin du programme d'installation courant, insérez
 la disquette \"Drivers for Windows\", s.v.p., et entrez:

 README  [─┘]"
@Endif
@If (@L==5)
@QString @t011 = " Con i tasti [] e [] è possibile di scegliere un'unità disco."
@QString @t012 = " Confermare con [─┘]."
@QString @t021 = " Selezionare SI o NO con la BARRA SPAZIATRICE."
@QString @t022 =
" Azionare [─┘] per continuare (la directory verrà generata in caso di SI)
 oppure per modificare l'ultima inserzione (in caso di NO)."
@QString @t031 =
" Per ulteriori informazioni sulla configurazione dei driver
 si rimanda al manuale @B ed al file README,
 presente alla fine di questa installazione."
@QString @t041 = " Su quale unità disco è attualmente installato"
@QString @t042 = "?"
@QString @t051 = " In quale directory è attualmente installato"
@QString @t061 = "non esiste. Deve essere generata ?"
@QString @t071 = " L'installazione di"
@QString @t072 = "venne eseguita con successo."
@QString @t081 = " Directory"
@QString @t091 = " Quale directory"
@QString @t101 = "esiste già."
@QString @t102 = " Continuare con l'installazione in questa directory?"
@QString @t111 = " Selezionare SI / NO con la BARRA SPAZIATRICE e confermare con [─┘]."
@QString @t121 =
" Su quale unità disco
 si desidera di installare i \"@B Utilities\" ?"
@QString @t131 = " Per quale versione di"
@QString @t132 =
"\n si desidera di installare il driver @B?"
@QString @t133 = " Impiegare i tasti [] e [] per la selezione. Confermare con [─┘]."
@QString @t141 =
" Su quale unità disco si desidera di installare il driver @B"
@QString @t142 = " ed i file dei set di caratteri (Fonts) per AutoCAD Release 11 ?"
@QString @t143 =
" In quale directory si desidera di installare il driver @B"
@QString @t144 = " Su quale unità disco si desidera di installare i file dei"
@QString @t145 = " set di caratteri (Fonts) per AutoCAD Release 12 ?"
@QString @t146 = " In quale directory si desidera di installare i file dei"
@QString @t147 = " set di caratteri per AutoShade / AutoSketch ?"
@QString @t148 = " Quale dimensione di caratteri per i programmi AutoCAD e AutoShade ?"
@QString @t152 = "    Programmi d'applicazione supportati:"
@QString @t153 =
"    Prima dell'installazione dei driver @B, i relativi
    programmi d'applicazione devono essere già stati installati."
@QString @t161 =
"  Nel corso dell'installazione sarà pregato di inserire su quale unità disco
  ed in quale directory è attualmente installato il programma per il quale
  si desidera di installare dei driver (eccezione: AutoCAD Rel.11)."
@QString @t164 =
"  INFORMAZIONI SULL'USO DELLA TASTIERA:

  Se il nome della directory sostenuto nel riquadro dialogato è giusto,
  azionare  [─┘]  per continuare.
  Se il programma d'applicazione è installato in una directory diversa,
  azionare il TASTO INDIETRO  [─-]  ed inserire il nome giusto della
  directory. Azionare  [─┘]  per continuare."
@QString @t16a =
"  Se ha sbagliato indicando un'unità disco / una directory, azionare
  ancora  [─┘]  per ripetere l'inserzione.
  La terminazione dell'installazione è sempre possibile con il tasto [Esc].




  Si desidera di continuare con l'installazione @B ?"
@QString @t16e = "Continuare"
@QString @t16f = " Finire   "
@QString @t171 =
" Selezionare i programmi per i quali si desidera di installare dei driver.
 ATTENZIONE: Se questo programma d'installazione viene eseguito PER LA PRIMA
             VOLTA, selezionare \"@B Utilities\" per di più."
@QString @t174 = "       Con i tasti [] e [] è possibile di muovere la trave illuminata."
@QString @t175 =
"       Con la  BARRA SPAZIATRICE  è possibile di attivare e disattivare
       il driver raffigurato in modo invertito.  Continuare con [─┘]."
@QString @t177 = "           Non venne selezionato un driver per l'installazione !"
@QString @t181 =
" Nel presente sistema è disponibile memoria EMS (Extended Memory).
 Deve essere utilizzata la versione EMS del driver @B
 per DataCAD ?"
@QString @y = " SI "
@QString @n = " NO "
@QString @t191 =
"    Se si desidera far uso della funzione screen save (caricare e
    salvare la visualizzazione schermo), scegliere il driver maggiore.
    In caso contrario, scegliere il driver minore."
@QString @t194 = "Generic CADD, driver minore  "
@QString @t195 = "Generic CADD, driver maggiore"
@QString @t201 =
" Indicare la directory nella quale i \"@B Utilities\"
 devono essere installati.
 La directory standard è: @SubDir"
@QString @t204 =
"Continuare con l'installazione
 dei \"@B Utilities\" in questa directory ?"
@QString @t251 =
" Su quale unità disco sono installati i \"@B Utilities\" ?"
@QString @t252 =
" In quale directory sono installati i \"@B Utilities\" ?"
@QString @t253 =
"non contiene i \"@B Utilities\"."
@QString @t254 = "non esiste."
@QString @t300 =
" Non posso trovare i \"@B Utilities\" nella directory"
@QString @t301 =
" Se non sono installati i \"@B Utilities\", azionare [Esc]."
@QString @t320 =
" NOTA:      Installazione dei driver per Windows

 Dopo la fine del programma d'installazione in corso, inserire
 il disco \"Drivers for Windows\", per favore, ed inserire:

 README  [─┘]"
@Endif
@If (@L==4)
@QString @t011 = " Con las teclas [] y [] Usted puede seleccionar el disco."
@QString @t012 = " Confirmar con [─┘]."
@QString @t021 = " Seleccione SI o NO con el ESPACIADOR."
@QString @t022 =
" Dar [─┘] para continuar (al dar SI, se crea el directorio)
 o para cambiar el último ingreso (al dar NO)."
@QString @t031 =
" Consulte por favor las informaciones adicionales
 sobre el driver en el manual @B
 y en el archivo README al finalizar la instalación.
 "
@QString @t041 = " En qué disco está"
@QString @t042 = "ahora instalado ?"
@QString @t051 = " En qué directorio está"
@QString @t061 = "no existe. Quiere crearlo ?"
@QString @t071 = " La instalación de"
@QString @t072 = "ha sido completada con éxito."
@QString @t081 = " Directorio"
@QString @t091 = " Qué directorio"
@QString @t101 = "ya existe."
@QString @t102 = " Quiere Usted continuar la instalación en este directorio ?"
@QString @t111 = " Seleccionar SI / NO con el espaciador. A continuación dar [─┘]."
@QString @t121 =
" En qué disco desea Usted instalar \"@B Utilities\" ?"
@QString @t131 = " Para qué versión de"
@QString @t132 =
"\n desea Usted instalar el driver @B ?"
@QString @t133 = " Utilice las teclas [] y [] para seleccionar. Confirme con [─┘]."
@QString @t141 =
" En qué disco desea Usted que el driver @B y los"
@QString @t142 = " Archivos de fuentes para AutoCAD Rel.11 sean instalados?"
@QString @t143 =
" En qué directorio desea Usted que el driver @B y los"
@QString @t144 = " En qué disco desea que los archivos de fuentes"
@QString @t145 = " para AutoCAD Rel. 12 sean instalados?"
@QString @t146 = " En qué directorio desea que los archivos de fuentes"
@QString @t147 = " Archivos de fuentes de AutoShade / 3DStudio se instalen ?"
@QString @t148 = " Qué tamaño de fuente desea utilizar en AutoCAD y AutoShade ?"
@QString @t152 = "    Aplicaciones soportadas:"
@QString @t153 =
"    Antes de la instalación del driver @B
    deben estar las corresp. aplicaciones ya instaladas."
@QString @t161 =
"  En el curso de la instalación se le solicitará indicar en
  cual disco y en qué directorio la correspondiente aplicación
  está actualmente instalada (excepto: AutoCAD Rel.11)."
@QString @t164 =
"  INFORMACION PARA EL MANEJO DEL TECLADO:

  Cuando el nombre indicado en el campo de entrada es correcto, accione
  la tecla [─┘] para continuar.
  Si la aplicación está instalada en otro directorio, accione
  la tecla de retroceso [─-] e indique el directorio correcto.
  Oprima a continuacion [─┘]."
@QString @t16a =
"  Si Usted ha indicado por error un disco/directorio equivocados:
  oprima otra vez [─┘] para poder repetir la entrada.
  La interrupción de la instalación es siempre posible con la tecla [Esc].




  Desea proseguir con la instalación de @B ?"
@QString @t16e = "Proseguir "
@QString @t16f = " Concluir "
@QString @t171 =
" Seleccione las aplicaciones para las cuales se deben instalar los drivers.
  ATENCION:   Si este programa de instalación se ejecuta POR PRIMERA VEZ
              seleccione adicionalmente  \"@B Utilities\"."
@QString @t174 = "    Con las teclas [] y [] puede Usted desplazar la barra de selección."
@QString @t175 =
"    Con el ESPACIADOR Usted puede activar o desactivar el driver que se
    ve resaltado, para la instalación. Continuar con [─┘]."
@QString @t177 = "          No se han seleccionado drivers para la instalación!"
@QString @t181 =
" Usted tiene EMS (Extended Memory) disponible en su sistema.
 Desea Usted utilizar la versión EMS del driver @B DataCAD?"
@QString @y = " SI "
@QString @n = " NO "
@QString @t191 =
"       Si Usted desea utilizar la función Screen Save
       (cargar o guardar pantalla), seleccione el driver mayor.
       En caso contrario, seleccione el driver menor."
@QString @t194 = " Driver Generic CADD, Versión menor "
@QString @t195 = " Driver Generic CADD, Versión mayor "
@QString @t201 =
" Por favor, indique el directorio en el que deben ser instaladas
 \"@B Utilities\".
 El directorio estándar es:  @SubDir"
@QString @t204 =
"Desea Usted continuar
 la instalación de \"@B Utilities\" en este directorio?"
@QString @t251 =
" En qué unidad de disco ha instalado Usted \"@B Utilities\" ?"
@QString @t252 =
" En qué directorio ha instalado Usted \"@B Utilities\" ?"
@QString @t253 =
"no contiene \"@B Utilities\"."
@QString @t254 = "no existe."
@QString @t300 =
" No puedo encontrar \"@B Utilities\" en el directorio
"
@QString @t301 =
" Si \"@B Utilities\" no están instalados, presione [Esc]."
@QString @t320 =
" NOTA:     Instalación del driver para Windows

 después de la terminación de la instalación corriente,
 inserte el diskette \"Drivers for Windows\" e indique:

 README  [─┘]"
@Endif
@EndVars

@If (@Com(1) == 744 || @Com(2) == 744 || @Com(3) == 744 || @Com(4) == 744)
 @If (@L == 2)
@Display @Cls

     Warnung:  INSTALL hat einen möglichen Adressenkonflikt in Ihrem
     System bei Adresse 2E8h festgestellt (diese Adresse ist allgemein
     als COM4 reserviert). Wenn in Ihrem System ein Modem, Fax/Modem
     oder eine Soundkarte in Betrieb ist, kann eine Inkompatibilität
     mit der @B vorliegen.

     (Einige Peripheriegeräte verwenden diese im allgemeinen unbenutzte
     Adresse, obwohl die AT-Busspezifikation sie für Graphiksubsysteme
     vorsieht.)

     Es wird empfohlen, INSTALL jetzt abzubrechen und das betrefffende
     Peripheriegerät auf eine andere Adresse umzukonfigurieren, z.B.
     COM1 oder COM2. Dies kann durch Jumper oder Schalter auf dem Gerät
     erfolgen, oder mit Hilfe eines Dienstprogrammes.

   @Pause
   @Cls

     Wenn Sie INSTALL nicht abbrechen, können Sie zwar fortfahren, aber
     Sie werden nicht die besonderen Vorteile Ihrer @B
     nutzen können, bis dieser Konflikt beseitigt ist. Möglicherweise treten
     Bild-Darstellungsprobleme unter Windows auf und Auflösungen von mehr
     als 640x480 in 16 Farben laufen nicht korrekt.


   @Pause
@EndDisplay

 @Else /* @L */

@Display @Cls

     Warning:  INSTALL has detected a potential address conflict in
     your system at address space 2E8H (generally this space is
     reserved as COM4).  If you are running a modem, fax/modem
     or sound card in your system, there may be an incompatibility
     with the @B .

     (Some communication peripherals try and utilize this generally
     unused space, however the AT Bus specification reserves this space
     for graphics subsystems.)

     It is recommended that you exit the INSTALL program now and
     reconfigure the other communication device for another address
     such as COM1 or COM2.  This can be done through jumpers or
     switches on the device, or through a software utility.


   @Pause
   @Cls



     If you do not exit INSTALL, you can continue but you will not be
     able to take full advantage of the advanced features of your
     @B until this conflict is removed. Probably,
     you will have display problems running Windows and you will not
     be able to properly run resolutions beyond 640x480 in 16 colors.



    @Pause
@EndDisplay

 @Endif /* @L */
@EndIf /* @Com */

@FlushOptions()
/*
@GetOption @LocalWindow (18, 39)
@t161


@t164
@t16a
 @t133
@Option 1001 = "@t16e"
@Option 1000 = "@t16f"
@EndOption
/**/
@SetOption(1001)


nochmal:
@FlushGroups()
@SetGroup(B)
@BarOffset(1)
@MaxListSize(9)
@ScrHead(1, M, 0, 63, "@Name    @Version")
@GetGroups @Checkbox @LocalWindow (14, 39) @Cls
@t171











@t174
@t175
@Set B = "@B Utilities                   "
@Set W = "Windows 3.1                        "
@Set D = "AutoCAD 11 / AutoCAD 12            "
@Set T = "AutoShade 2.1, 3DStudio 1.0/2.0    "
@Set G = "CADkey 5.0/386 - Display List      "
@Set H = "CADVANCE 3.51                      "
@Set K = "Generic CADD 6.0                   "
@Set M = "MicroStation 4.0 Protected Mode    "
@Set N = "Lotus 1-2-3 V 2.3                  "
@Set O = "Lotus Symphony 2.0                 "
@Set S = "Microsoft WORD 5.0                 "
@Set V = "WordPerfect 5.1                    "
@EndGroups
@BarOffset(0)

@Display
 @Cls
  @If('B' [= @Group || 'W' [= @Group || 'D' [= @Group || 'G' [= @Group ||
      'H' [= @Group || 'I' [= @Group || 'K' [= @Group || 'L' [= @Group ||
      'M' [= @Group || 'N' [= @Group || 'O' [= @Group || 'S' [= @Group ||
      'U' [= @Group || 'T' [= @Group || 'V' [= @Group || 'A' [= @Group)
  @Else

@t177



   @Pause
   @Goto nochmal
  @Endif
@EndDisplay

utils:
@If('B'[= @Group)
@GetOutDrive @LocalWindow (20, 39)
@t121
@t011
@t012
@EndOutDrive

@GetSubDir
@t201
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@OutDrive:@SubDir")
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @OutDrive:@SubDir @t101 @t204
@t111
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto utils @Endif
@Else
@Endif
@Endif /* 'B' */

nutils:
@If (('B' [! @Group) &&
  ('D' [= @Group || 'G' [= @Group || 'H' [= @Group || 'I' [= @Group ||
   'K' [= @Group || 'L' [= @Group || 'M' [= @Group || 'N' [= @Group ||
   'O' [= @Group || 'S' [= @Group || 'U' [= @Group || 'T' [= @Group ||
   'V' [= @Group))
@GetOutDrive @LocalWindow (15, 39)
@t251
@t011
@t012
@t301
@EndOutDrive

@GetSubdir
@t252
@Prompt = "@t091 ([─┘] = @Subdir) ? "
@LocalWindow (13, 39)
@EndSubdir

 @If(@Exists "@OutDrive:@SubDir\\@Checkfile") @Else
@Display
@d8
  @If(@Exists "@OutDrive:@SubDir")
@t081 @OutDrive:@SubDir @t253 @Else
@t081 @OutDrive:@SubDir @t254 @Endif

@Pause
@EndDisplay
@Goto nutils
 @Endif
@Endif /* !'B' */

@If('D' [= @Group || 'T' [= @Group)
@If('D' [= @Group)
 @ClearOption(11)
 @ClearOption(12)
@GetOption @LocalWindow (13, 39)
@t131 AutoCAD @t132
@t133
@Option 12 = "AutoCAD Release 12"
@Option 11 = "AutoCAD Release 11"
@EndOption
@Endif /* 'D' */

@If(11 [= @Option)
aqu11:
@If('B' [! @Group)
@GetOutDrive @LocalWindow (20, 39)
@t141
@t142
@t011
@t012
@EndOutDrive

@GetSubdir
@t143
@t142
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (13, 39)
@EndSubdir

@Endif /* !'B' */

@ELSEIF (12 [= @Option)
acad12:
@GetOutDrive @acad12drv @LocalWindow (20, 39)
@t041 AutoCAD Rel.12 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @acad12dir
@t051 AutoCAD Rel.12 @t042
@Prompt = "@t091 ([─┘] = @acad12dir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@acad12drv:@acad12dir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @acad12drv:@acad12dir @t061

@t021
@t022
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto acad12 @Endif
@Endif

aqu12:
@If('B' [! @Group)
@GetOutDrive @LocalWindow (20, 39)
@t144
@t145
@t011
@t012
@EndOutDrive

@GetSubdir
@t146
@t145
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (13, 39)
@EndSubdir
@Endif /* !'B' */

@ELSE /* Kein AutoCAD, nur AutoShade / 3DStudio */
aqush3ds:
@If('B' [! @Group)
@GetOutDrive @LocalWindow (20, 39)
@t141
@t147
@t011
@t012
@EndOutDrive

@GetSubdir
@t143
@t147
@Prompt = "@t091 ([─┘] = @SubDir)? "
@LocalWindow (13, 39)
@EndSubdir
@Endif /* !'B' */
@ENDIF /* 11,12 */

@GetOption @LocalWindow (13, 39)
@t148
@t133
 @Option 230 = " 8X16.FNT"
 @Option 220 = "  6X9.FNT"
 @Option 240 = " 9X15.FNT"
 @Option 250 = "12X20.FNT"
 @Option 260 = "12X24.FNT"
 @Option 270 = "15X25.FNT"
 @Option 280 = "16X30.FNT"
@EndOption
@Endif /* 'D' || 'T' */

@If('G'[= @Group)
cadkey:
@GetOutDrive @ckdrv @LocalWindow (20, 39)
@t041 CADkey 5.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @ckdir
@t051 CADkey 5.0 @t042
@Prompt = "@t091 ([─┘] = @ckdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@ckdrv:@ckdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @ckdrv:@ckdir @t061

@t021
@t022
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto cadkey @Endif
@Endif

@If(@Exists "@ckdrv:@ckdir\\GRDEV.DAT")
 @System "Copy @ckdrv:@ckdir\\GRDEV.DAT @ckdrv:@ckdir\\GRDEV.BAK >nul"
@Endif
@Endif /* 'G' */

@If('H'[= @Group)
cadvance:
@GetOutDrive @cvandrv @LocalWindow (20, 39)
@t041 CADVANCE 3.51 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @cvandir
@t051 CADVANCE 3.51 @t042
@Prompt = "@t091 ([─┘] = @cvandir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@cvandrv:@cvandir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @cvandrv:@cvandir @t061

@t021
@t022
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto cadvance @Endif
@Endif
@Endif /* 'H' */

@If('K'[= @Group)
generic:
@GetOutDrive @gendrv @LocalWindow (20, 39)
@t041 Generic CADD @t042
@t011
@t012
@EndOutDrive

@GetSubdir @gendir
@t051 Generic CADD @t042
@Prompt = "@t091 ([─┘] = @gendir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@gendrv:@gendir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @gendrv:@gendir @t061

@t021
@t022
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto generic @Endif
@Endif

@GetOption @LocalWindow (13, 39)
@t191
@Option 110 = "@t195"
@Option 100 = "@t194"
@EndOption
@Endif /* 'K' */

@If('M'[= @Group)
ustatp:
@GetOutDrive @ustapdrv @LocalWindow (20, 39)
@t041 MicroStation 4.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @ustapdir
@t051 MicroStation 4.0 @t042
@Prompt = "@t091 ([─┘] = @ustapdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@ustapdrv:@ustapdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @ustapdrv:@ustapdir @t061

@t021
@t022
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto ustatp @Endif
@Endif
@Endif /* 'M' */

@If('N'[= @Group)
lotus:
@GetOutDrive @lotusdrv @LocalWindow (20, 39)
@t041 Lotus 1-2-3 v2.3 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @lotusdir
@t051 Lotus 1-2-3 v2.3 @t042
@Prompt = "@t091 ([─┘] = @lotusdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@lotusdrv:@lotusdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @lotusdrv:@lotusdir @t061

@t021
@t022
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto lotus @Endif
@Endif
@Endif /* 'N' */

@If('O'[= @Group)
symphony:
@GetOutDrive @symdrv @LocalWindow (20, 39)
@t041 Symphony 2.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @symdir
@t051 Symphony 2.0 @t042
@Prompt = "@t091 ([─┘] = @symdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@symdrv:@symdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @symdrv:@symdir @t061

@t021
@t022
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto symphony @Endif
@Endif
@Endif /* 'O' */

@If('S'[= @Group)
word:
@GetOutDrive @worddrv @LocalWindow (20, 39)
@t041 WORD 5.0 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @worddir
@t051 WORD 5.0 @t042
@Prompt = "@t091 ([─┘] = @worddir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@worddrv:@worddir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @worddrv:@worddir @t061

@t021
@t022
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto word @Endif
@Endif

@If(@Exists "@worddrv:@worddir\\SCREEN.VID")
 @System "Copy @worddrv:@worddir\\SCREEN.VID @worddrv:@worddir\\SCREEN.ORG >nul"
@Endif
@Endif /* 'S' */

@If('V'[= @Group)
wp:
@GetOutDrive @wpdrv @LocalWindow (20, 39)
@t041 WordPerfect 5.1 @t042
@t011
@t012
@EndOutDrive

@GetSubdir @wpdir
@t051 WordPerfect 5.1 @t042
@Prompt = "@t091 ([─┘] = @wpdir)? "
@LocalWindow (13, 39)
@EndSubdir

@If(@Exists "@wpdrv:@wpdir") @Else
 @ClearOption(0)
 @GetOption @Checkbox @LocalWindow (13, 39)
@t081 @wpdrv:@wpdir @t061

@t021
@t022
 @Option 0 = ""
 @EndOption
 @If(0 [! @Option) @Goto wp @Endif
@Endif
@Endif /* 'V' */

@If ('W' [= @Group)
@If("@StartupDir" == "\\")
@Display

@t320
@d8
@Pause
@EndDisplay
@Endif // @StartupDir
@Endif /* 'W' */


@DefineDisk
    @Label = "Disk 1 of 1"
@If(@L==2)
 @File   README.GER @Out README
 @File  MAILBOX.GER @Out MAILBOX.DOC
@Else
 @File   README.ENG @Out README
 @File  MAILBOX.ENG @Out MAILBOX.DOC
@Endif // @L

//          @File     BIOS.TXT
          @File     SHOW.EXE

@If(@L==2)
 @F DPMS.GER @O DPMS.DOC @Group b
@Else
 @F DPMS.ENG @O DPMS.DOC @Group b
@Endif

        @BeginLib V7-MLITE.LIF
/* Utilities: */
          @File   VGAFIX.EXE @Group b
 @F V7LITVBE.EXE @Group b
 @F   S3TEST.EXE @Group b
 @F    SMODE.EXE @Group b
 @F   S3INIT.EXE @Group b
@F  V7HFREQ.COM @Group b
@F  V7HFREQ.TIM @Group b

@If(@L==1) @F MNTLPCIE.BAT @O MNTLPCI.BAT @Group b @ElseIf(@L==2) @F MNTLPCID.BAT @O MNTLPCI.BAT @Group b @ElseIf(@L==3) @F MNTLPCIF.BAT @O MNTLPCI.BAT @Group b @ElseIf(@L==5) @F MNTLPCII.BAT @O MNTLPCI.BAT @Group b @ElseIf(@L==4) @F MNTLPCIS.BAT @O MNTLPCI.BAT @Group b @Endif

/* Aquila-Treiber für AutoCAD 11 , AutoShade, 3D Studio: */
          @File ACAD.ENG @Out ACAD.DOC @Group dt

 @F   RCP_S3.EXP @Option 11 @Group d
 @F      IBM.LGO @Option 11 @Group d
 @F       HP.LGO @Option 11 @Group d
 @F  NEWS3I.LGO @Option 11 @Group d
 @F   AQUILA.LGO @Option 11 @Group d
/* Aquila-Treiber für AutoCAD 12 , AutoShade, 3D Studio: */
 @F   RCP_S3.EXP  @O @acad12drv:@acad12dir\\drv\\RCP_S3.EXP  @Option 12 @Group d
 @F      IBM.LGO  @O @acad12drv:@acad12dir\\drv\\IBM.LGO     @Option 12 @Group d
 @F       HP.LGO  @O @acad12drv:@acad12dir\\drv\\HP.LGO      @Option 12 @Group d
 @F  NEWS3I.LGO  @O @acad12drv:@acad12dir\\drv\\NEWS3I.LGO @Option 12 @Group d
 @F   AQUILA.LGO  @O @acad12drv:@acad12dir\\drv\\AQUILA.LGO  @Option 12 @Group d
/* Aquila-Treiber nur für AutoShade, 3D Studio: */
       @If('D' [! @Group)
 @F   RCP_S3.EXP @Group t
 @F      IBM.LGO @Group t
 @F       HP.LGO @Group t
 @F  NEWS3I.LGO @Group t
 @F   AQUILA.LGO @Group t
       @Endif
/* Fonts für AutoCAD, AutoShade: */
 @F    12x20.FNT  @O fonts\\12x20.FNT    @Group dt
 @F    12X24.FNT  @O fonts\\12x24.FNT    @Group dt
 @F    15X25.FNT  @O fonts\\15x25.FNT    @Group dt
 @F    16X30.FNT  @O fonts\\16x30.FNT    @Group dt
 @F      6X9.FNT  @O fonts\\6x9.FNT      @Group dt
 @F     8X16.FNT  @O fonts\\8x16.FNT     @Group dt
 @F     9X15.FNT  @O fonts\\9x15.FNT     @Group dt
/* CADkey: */
@If(@L==2) @F CADKEY.GER @O CADKEY.DOC @Group g @ElseIf(@L==1) @F CADKEY.ENG @O CADKEY.DOC @Group g @ElseIf(@L==3) @F CADKEY.FRA @O CADKEY.DOC @Group g @ElseIf(@L==5) @F CADKEY.ITA @O CADKEY.DOC @Group g @ElseIf(@L==4) @F CADKEY.SPA @O CADKEY.DOC @Group g @Endif
 @F   CK_911.EXE  @O @ckdrv:@ckdir\\CK_911.EXE @Group g
@If(@Exists "@ckdrv:@ckdir\\GRDEV.DAT")
 @F    GRDEV.DAT @AppendTo @ckdrv:@ckdir\\GRDEV.DAT  @Group g
@Else
 @F    GRDEV.DAT  @O @ckdrv:@ckdir\\GRDEV.DAT  @Group g
@Endif
/* CADVANCE: */
 @F   CDV911.DRV  @O @cvandrv:@cvandir\\GS.DRV  @Group h
 @F      CAD.RND  @O @cvandrv:@cvandir\\CAD.RND @Group h
/* Generic CADD: */
@If(@L==2) @F GCAD.GER @O GCAD.DOC @Group k @ElseIf(@L==1) @F GCAD.ENG @O GCAD.DOC @Group k @ElseIf(@L==3) @F GCAD.FRA @O GCAD.DOC @Group k @ElseIf(@L==5) @F GCAD.ITA @O GCAD.DOC @Group k @ElseIf(@L==4) @F GCAD.SPA @O GCAD.DOC @Group k @Endif
 @F  LGEN911.VGD  @O @gendrv:@gendir\\LGEN911.VGD @Option 110 @Group k
 @F  SGEN911.VGD  @O @gendrv:@gendir\\SGEN911.VGD @Option 100 @Group k
/* MicroStation Protected Mode: */
 @F   MGL911.EXP  @O @ustapdrv:@ustapdir\\drivers\\MGL911.EXP @Group m
 @F   MGL911.MA   @O @ustapdrv:@ustapdir\\drivers\\MGL911.MA  @Group m
 @F   MGL911.MGL  @O @ustapdrv:@ustapdir\\drivers\\MGL911.MGL @Group m
/* Lotus 1-2-3: */
 @F  123D600.DRV  @O @lotusdrv:@lotusdir\\123D600.DRV  @Group n
 @F  123D768.DRV  @O @lotusdrv:@lotusdir\\123D768.DRV  @Group n
 @F  123S600.DRV  @O @lotusdrv:@lotusdir\\123S600.DRV  @Group n
 @F  123S768.DRV  @O @lotusdrv:@lotusdir\\123S768.DRV  @Group n
 @F 123TXT43.DRV  @O @lotusdrv:@lotusdir\\123TXT43.DRV @Group n
 @F  123TEXT.DRV  @O @lotusdrv:@lotusdir\\123TEXT.DRV  @Group n
 @F 123TXT25.DRV  @O @lotusdrv:@lotusdir\\123TXT25.DRV @Group n
/* Symphony: */
 @F  123D600.DRV  @O @symdrv:@symdir\\123D600.DRV  @Group o
 @F  123D768.DRV  @O @symdrv:@symdir\\123D768.DRV  @Group o
 @F  123S600.DRV  @O @symdrv:@symdir\\123S600.DRV  @Group o
 @F  123S768.DRV  @O @symdrv:@symdir\\123S768.DRV  @Group o
 @F 123TXT43.DRV  @O @symdrv:@symdir\\123TXT43.DRV @Group o
 @F  123TEXT.DRV  @O @symdrv:@symdir\\123TEXT.DRV  @Group o
 @F 123TXT25.DRV  @O @symdrv:@symdir\\123TXT25.DRV @Group o
/* MS-WORD: */
@If(@L==2) @F WORD.GER @O WORD.DOC @Group s @ElseIf(@L==1) @F WORD.ENG @O WORD.DOC @Group s @ElseIf(@L==3) @F WORD.FRA @O WORD.DOC @Group s @ElseIf(@L==5) @F WORD.ITA @O WORD.DOC @Group s @ElseIf(@L==4) @F WORD.SPA @O WORD.DOC @Group s @Endif
 @F   SCREEN.VID  @O @worddrv:@worddir\\SCREEN.VID @Group s
/* WordPerfect: */
 @F  WPGRAPH.VRS  @O @wpdrv:@wpdir\\WPGRAPH.VRS @Group v
 @F   WPTEXT.VRS  @O @wpdrv:@wpdir\\WPTEXT.VRS  @Group v
     @EndLib
@EndDisk


@If("@StartupDir" != "\\") //////////////////////////////////////////////////////
@DefineVars @QString @FName = "CONTINUE" @EndVars

AGAIN:
@GetString @FName @Cls @LocalWindow(20, 39)
@If(@L==2)
 Zur Fortsetzung der Installation wird im Hauptverzeichnis Ihres Start-
 laufwerkes ( normalerweise in C:\ ) ein Hilfsprogramm erzeugt.

 Der vorgegebene Name des Hilfsprogrammes lautet: @FName
 Drücken Sie RETURN, wenn Sie diesen Namen übernehmen wollen.

 Wenn Sie einen anderen Namen wünschen, ändern Sie den Namen
 im grünen Eingabefeld. Beachten Sie bitte, daß maximal 8 Buchstaben
 zulässig sind. Drücken Sie anschließend RETURN.
@Prompt = " Welcher Name? "
@Else // @L
 To continue installation, an auxiliary program will be created in the
 root directory of your boot drive ( normally in C:\ ).

 The default name of the auxiliary program is: @FName
 Press RETURN if you want to confirm this name.

 If you prefer a different name, change the name in the green
 dialog box. Please note that 8 characters is the maximum name length.
 After this, press RETURN.
@Prompt = " Which name? "
@Endif // @L
@EndString

@If(@StrLen("@FName") < 1)
 @FName = "CONTINUE"
 @Goto AGAIN
@Endif

@If(@StrLen("@FName") > 8)
@Display
@If(@L==2)
 Der Name @FName ist zu lang.
 Es sind höchstens 8 Buchstaben zulässig.
@Else // @L
 The name @FName is too long.
 The maximum length is 8 characters.
@Endif // @L
@Pause
@EndDisplay
@FName = "@StrHead("@FName", 8)"
@Goto AGAIN
@Endif // @StrLen

@If(@Exists("@BootDrive:\\@FName.@FExt"))
@SetOption(0)
@GetOption @Checkbox @LocalWindow(22, 39)
@If(@L==2)
 Die Datei @BootDrive:\@FName.@FExt existiert bereits.
 Darf ich diese Datei überschreiben?

 Anmerkung:
 Wenn die Datei während einer vorhergehenden SPEA CD-ROM Installation
 erzeugt wurde, darf die Datei jetzt überschrieben werden.
 Falls Sie jedoch wünschen, daß diese Datei nicht überschrieben wird,
 wählen Sie bitte NEIN.

 Wählen Sie JA/NEIN mit der LEERTASTE. Drücken Sie [RETURN] zu Fortsetzung.
@Else // @L
 The file @BootDrive:\@FName.@FExt already exists.
 May I overwrite this file?

 Note:
 If this file was created during a previous SPEA CD ROM installation,
 the file may be overwritten now.
 However, if you wish not to overwrite this file, please select NO.

 Select YES/NO with the SPACE BAR. Press [ENTER] to continue.
@Endif // @L
@Option 0 = ""
@EndOption
@If(0 [! @Option) @Goto AGAIN @Endif
@Endif // @Exists
@Endif // @StartupDir /////////////////////////////////////////////////////////

@If('B' [= @Group)
@Display
@If(@L==2)
 Ihre Datei AUTOEXEC.BAT wird nun überprüft und, falls nötig, modifiziert.
 Keine Sorge - das Original wird zuvor gesichert in der Datei:
@Else // @L
 Your AUTOEXEC.BAT file will now be checked and modified, if required.
 Don't worry - before this, the original will be saved in the file:
@Endif // @L
            AUTOEXEC.CPY

@Pause
@EndDisplay

@SetAutoexec @Overwrite
 @Verbatim "@OutDrive:@SubDir\\V7LITVBE.EXE"
@EndAutoexec
@Endif // 'B'


@Finish
@If('D' [= @Group || 'T' [= @Group)
@ChDrive @OutDrive
@ChDir "@SubDir"
@If(11 [= @Option)
  @Write("V7ACAD.BAT", "wt", "SET DSPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
@Endif
@If(11 [= @Option && 'T' [= @Group)
  @Write("V7ACAD.BAT", "at", "SET RCPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RDPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
@Endif
@If(12 [= @Option)
  @Write("V7ACAD.BAT", "wt", "SET ACADDRV=@acad12drv:@acad12dir\\DRV\n")
@Endif
@If(12 [= @Option && 'T' [= @Group)
  @Write("V7ACAD.BAT", "at", "SET DSPADI=@acad12drv:@acad12dir\\DRV\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RCPADI=@acad12drv:@acad12dir\\DRV\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RDPADI=@acad12drv:@acad12dir\\DRV\\RCP_S3.EXP\n")
@Endif
@If(11 [! @Option && 12 [! @Option && 'T' [= @Group)
  @Write("V7ACAD.BAT", "wt", "SET DSPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RCPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
  @Write("V7ACAD.BAT", "at", "SET RDPADI=@OutDrive:@SubDir\\RCP_S3.EXP\n")
@Endif
@If(220 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\6X9.FNT\n")   @Endif
@If(230 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\8X16.FNT\n")  @Endif
@If(240 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\9X15.FNT\n")  @Endif
@If(250 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\12X20.FNT\n") @Endif
@If(260 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\12X24.FNT\n") @Endif
@If(270 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\15X25.FNT\n") @Endif
@If(280 [= @Option) @Write("V7ACAD.BAT", "at", "SET AQUILA_FONT=@OutDrive:@SubDir\\FONTS\\16X30.FNT\n") @Endif
@Endif /* 'D' || 'T' */

@If('B' [= @Group)
 @Write ("@OutDrive:\\@SubDir\\setgdc.bat", "wt", "SET GDC=@OutDrive:@SubDir\n")
@Endif

@ChDrive @OutDrive
@ChDir "@SubDir"

@If (@System "show readme") @Endif
@Cls

@Write ("@OutDrive:\\@SubDir\\init.bat", "wt", "@@echo off\n")
@Write ("@OutDrive:\\@SubDir\\init.bat", "at", "@OutDrive:\n")
@Write ("@OutDrive:\\@SubDir\\init.bat", "at", "CD @SubDir\n")
@Write ("@OutDrive:\\@SubDir\\init.bat", "at", "SET GDC=@OutDrive:@SubDir\n")

@If('B' [= @Group)
 @Write ("@OutDrive:\\@SubDir\\init.bat", "at", "V7LITVBE\n")
@Endif // 'B'

@If("@StartupDir" != "\\") ////////////////////////////////////////////////////
 @Copy("@OutDrive:@SubDir\\init.bat", "@BootDrive:\\@FName.BAT")

@If('W' [= @Group)
 @Write ("@BootDrive:\\@FName.BAT", "at", "@InDrive:\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "CD \\SPEA\\INSTALL\\MERLITE\n")

@If(@L==2)
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO Lesen Sie jetzt Informationen zu den Windows Treibern!\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "PAUSE\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "SHOW WINDOWS.GER\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO Drücken Sie eine Taste zur Fortsetzung der Installation\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "PAUSE >NUL\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "WIN @InDrive:\\SPEA\\INSTALL\\MERLITE\\V7SETUP\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO Wollen Sie SPEAenergy installieren, das DPMS-Programm von SPEA (J/N)?\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "FRAGE\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL 107 GOTO END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL 106 WIN @InDrive:\\SPEA\\INSTALL\\MERLITE\\SPENERGY\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL  75 GOTO END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL  74 WIN @InDrive:\\SPEA\\INSTALL\\MERLITE\\SPENERGY\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", ":END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO SPEA Software Installation beendet.\n")
@Else
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO Please read now information about the Windows drivers!\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "PAUSE\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "SHOW WINDOWS.ENG\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO Press any key to continue the installation\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "PAUSE >NUL\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "WIN @InDrive:\\SPEA\\INSTALL\\MERLITE\\V7SETUP\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO Do you want to install SPEAenergy, the DPMS program made by SPEA (Y/N)?\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "FRAGE\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL 122 GOTO END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL 121 WIN @InDrive:\\SPEA\\INSTALL\\MERLITE\\SPENERGY\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL  90 GOTO END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "IF ERRORLEVEL  89 WIN @InDrive:\\SPEA\\INSTALL\\MERLITE\\SPENERGY\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", ":END\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "ECHO SPEA software installation finished.\n")
@Endif // @L
@Endif // 'W'
 @Write ("@BootDrive:\\@FName.BAT", "at", "@InDrive:\n")
 @Write ("@BootDrive:\\@FName.BAT", "at", "CD \\\n")

@If(@L==2)
 FORTSETZUNG DER INSTALLATION:
 -----------------------------

 1. Beenden Sie nun das aktuelle Programm.

 2. Falls Windows aktiv ist: Beenden Sie Windows!

 3. Starten Sie anschließend   @BootDrive:\@FName   zur Fortsetzung.
@Else // @L
 CONTINUATION OF INSTALLATION:
 -----------------------------

 1. Terminate the current program.

 2. If Windows is active: Terminate Windows!

 3. After this, start   @BootDrive:\@FName   to continue.
@Endif // @L
@Pause
@Endif // @StartupDir /////////////////////////////////////////////////////////

@ChDrive @InDrive
@EndFinish