NEW_STRING1={&Tahoma101}[ProductName] Installation Wizard has completed Successfully!
NEW_STRING2=< &Back
NEW_STRING3=&Finish
NEW_STRING4=&Next >
NEW_STRING5=Enable McAfee VirusScan Protection
NEW_STRING6=*Note - You cannot start the on access scanner if you are upgrading from a previous version. You must reboot the system before starting the on access scanner
NEW_STRING7=
NEW_STRING8=Ensure your product has the latest Virus Definition files.
NEW_STRING11=Select this if you wish to wait and run the update at a later time.
NEW_STRING12=This is the best selection if you do not have to configure a proxy server or a firewall to reach the internet
NEW_STRING13=This selection is best if you need to setup your connection for a firewall or proxy, or your local admin has set up a location for updating.
NEW_STRING14=This will launch the McAfee VirusScan interface at the completion of setup.
NEW_STRING15=Scan boot record at startup.
NEW_STRING16=This will add a line to your autoexec.bat that will scan your boot record for viruses at startup.
NEW_STRING17=Run McAfee VirusScan Central after Installation
NEW_STRING18=VirusScan has been Installed Successfully. Use the options below to configure your new installation
NEW_STRING22=Create an emergency recovery disk that will allow you to recover from virus infections.
NEW_STRING23=You must select at least one feature to be installed. Please select a feature to be installed to continue.
NEW_STRING24=OK
NEW_STRING25={&Tahoma101}[ProductName] Administrative Installation Wizard has completed Successfully!
NEW_STRING26={&Tahoma8}&Finish
NEW_STRING27=McAfee VirusScan is now available to be installed from the network location you selected.
NEW_STRING28={&Tahoma8}&Continue Later
NEW_STRING29={&Tahoma8}&Restore
NEW_STRING30={\TahomaBold10}Completing the [ProductName] Setup wizard
NEW_STRING31={&Tahoma8}Your system has not been modified. To complete installation at another time, please run setup again.
NEW_STRING32={&Tahoma8}Click Finish to exit the Setup wizard.
NEW_STRING33={&Tahoma8}You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
NEW_STRING34={&Tahoma8}Click Restore or Continue Later to exit the Setup wizard.
NEW_STRING35={&Tahoma8}The wizard was interrupted before [ProductName] could be completely installed.
NEW_STRING36={&Tahoma8}Your system has not been modified. To install this program at a later time, please run the installation again.
NEW_STRING37={&Tahoma8}Click Restore or Continue Later to exit the wizard.
NEW_STRING38={&Tahoma8}< &Back
NEW_STRING39={\System12}Completing the [ProductName] Setup Wizard
NEW_STRING40={&Tahoma8}&Configure
NEW_STRING41={&Tahoma8}&Skip Config
NEW_STRING42=Scan Memory For Viruses before Configuring
NEW_STRING43={&Tahoma8}The Setup wizard has successfully [ProgressType2] [ProductName]. Click Configure to finish setting up your product.
NEW_STRING44={&Tahoma8}
NEW_STRING45={&Tahoma8}Cancel
NEW_STRING46={&Tahoma8}&Next >
NEW_STRING47={\TahomaBold10}Welcome to the [ProductName] Setup wizard
NEW_STRING48={&Tahoma8}Please wait while the Setup wizard prepares to guide you through the setup.
NEW_STRING49={\TahomaBold10}Welcome to the [ProductName] installation wizard
NEW_STRING50={&Tahoma8}The Setup wizard will create a server image of [ProductName] at a specified network location. To continue, click Next.
NEW_STRING51={&Tahoma8}Preparing system for modification...
NEW_STRING52={&Tahoma8}Please wait while the Setup wizard [ProgressType3] [ProductName]. This may take several minutes.
NEW_STRING53=Progress done
NEW_STRING54={&Tahoma8}Status:
NEW_STRING55={&Tahoma8}The program features you selected are being [ProgressType2].
NEW_STRING57={\TahomaBold10}Resuming the [ProductName] Setup wizard
NEW_STRING58={&Tahoma8}Installation of [ProductName] on your computer will now be completed. To continue, click Next.
NEW_STRING59={&Tahoma8}Setup wizard will complete the suspended installation of [ProductName] on your computer. To continue, click Next.
NEW_STRING60={\TahomaBold10}Welcome to the [ProductName] Maintenance Wizard
NEW_STRING61={&Tahoma8}This wizard will allow you to add/remove features from, or remove [ProductName]. To continue, click Next
NEW_STRING62={&Tahoma8}&Cancel
NEW_STRING63={&Tahoma8}Please review the information before continuing with the installation
NEW_STRING64={&MSSansBold8}Product Information
NEW_STRING65={&Tahoma8}&Yes
NEW_STRING66={&Tahoma8}&No
NEW_STRING67={&Tahoma8}<error text goes here><error text goes here><error text goes here><error text goes here><error text goes here><error text goes here><error text goes here><error text goes here><error text goes here><error text goes here><error text goes here>
NEW_STRING68={&Tahoma8}&OK
NEW_STRING69={&Tahoma8}&Abort
NEW_STRING70={&Tahoma8}&Ignore
NEW_STRING71={&Tahoma8}&Retry
NEW_STRING72={&Tahoma8}The most commonly used features will be installed
NEW_STRING73={&Tahoma8}Choose which program features you want installed and where they will be installed. Recommended for advanced users.
NEW_STRING74={&Tahoma8}Choose the setup type that best suits your needs.
NEW_STRING75={\TahomaBold10}Setup Type
NEW_STRING76={&TahomaBold10}Select Security Type
NEW_STRING77=With standard user security any user logged into the machine can start/stop/configure VirusScan and schedule tasks.
NEW_STRING78=&Cancel
NEW_STRING79=Use this setting to allow/deny access to VirusScan configuration settings
NEW_STRING80=With maximum security enabled, only users with administrator rights on the machine can enable/disable/configure VirusScan and configure scheduled tasks.
Scheduled tasks will still run for all users logged in, but only administrators will be able to configure the tasks.
NEW_STRING81=Create New Folder|
NEW_STRING82={&Tahoma8}OK
NEW_STRING83=Up One Level|
NEW_STRING84={&Tahoma8}&Folder name:
NEW_STRING85={&Tahoma8}&Look in:
NEW_STRING86={&Tahoma8}Browse to the destination folder.
NEW_STRING87={&MSSansBold8}Change Current Destination Folder
NEW_STRING88={&Tahoma8}Enter the network location or click Change to browse to a location. Click Install to create a server image of [ProductName] at the specified network location or click Cancel to exit the Setup wizard.
NEW_STRING89={&Tahoma8}&Network location:
NEW_STRING90={&Tahoma8}&Install
NEW_STRING91={&Tahoma8}&Change...
NEW_STRING92={&Tahoma8}Specify a network location for the server image of the product.
NEW_STRING93={&MSSansBold8}Network Location
NEW_STRING94={&Tahoma8}Are you sure you want to cancel [ProductName] installation?
NEW_STRING95={&Tahoma8}The highlighted volumes do not have enough disk space available for the currently selected features. You can remove files from the highlighted volumes, choose to install less features onto local drives, or select different destination drives.
NEW_STRING96={&Tahoma8}{120}{70}{70}{70}{70}
NEW_STRING97={&Tahoma8}Disk space required for the installation exceeds available disk space.
NEW_STRING98={&MSSansBold8}Out of Disk Space
NEW_STRING99={\TahomaBold10}[ProductName]
NEW_STRING100=Please wait while setup initializes...
NEW_STRING101={&Tahoma8}&Help
NEW_STRING102={&Tahoma8}Feature size
NEW_STRING103={&Tahoma8}Click on an icon in the list below to change how a feature is installed.
NEW_STRING104={&Tahoma8}Feature Description
NEW_STRING105={&Tahoma8}Disk &Usage
NEW_STRING106={&Tahoma8}Multiline description of the currently selected item
NEW_STRING107={&Tahoma8}<selected feature path>
NEW_STRING108={&Tahoma8}Set the destination directory:
NEW_STRING109={&Tahoma8}Select the program features you want installed.
NEW_STRING110={&MSSansBold8}Custom Setup
NEW_STRING111={&Tahoma8}Select Maintenance Mode
NEW_STRING112={&Tahoma8}Remove [ProductName] from your computer.
NEW_STRING113={&Tahoma8}Change which program features are installed. This option displays the Custom Selection dialog in which you can change the way features are installed.
NEW_STRING114={&Tahoma8}Modify, repair, or remove the program.
NEW_STRING115={&TahomaBold10}Program Maintenance
NEW_STRING116={&Tahoma8}The disk space required for the installation of the selected features.
NEW_STRING117={&MSSansBold8}Disk Space Requirements
NEW_STRING118={&Tahoma8}Click Install to begin the installation.
NEW_STRING119={&Tahoma8}If you want to review or change any of your installation settings, click Back. Click Cancel to exit the wizard.
NEW_STRING120={&Tahoma8}The wizard is ready to begin installation.
NEW_STRING121={&TahomaBold10}Ready to [ProgressType0] the Program
NEW_STRING122={&Tahoma8}Will be installed on first use. (Available only if the feature supports this option.)
NEW_STRING123={&Tahoma8}Will not be installed.
NEW_STRING124={&Tahoma8}Will be completely installed to the local hard drive.
NEW_STRING125={&Tahoma8}Will be installed to run from the network. (Available only if the feature supports this option.)
NEW_STRING126={&Tahoma8}Custom Setup allows you to selectively install program features.
NEW_STRING127={&Tahoma8}The icon next to the feature name indicates the install state of the feature. Click the icon to drop down the install state menu for each feature.
NEW_STRING128={&MSSansBold8}Custom Setup Tips
NEW_STRING129={&Tahoma8}This install state means the feature...
NEW_STRING130={&Tahoma8}Will have some subfeatures installed to the local hard drive. (Available only if the feature has subfeatures.)
NEW_STRING131={&Tahoma8}The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
NEW_STRING132={&Tahoma8}&Exit
NEW_STRING133={\Tahoma8}
NEW_STRING134={&Tahoma8}Some files that need to be updated are currently in use.
NEW_STRING135={&MSSansBold8}Files in Use
NEW_STRING136={&Tahoma8}Please read the following license agreement carefully.
NEW_STRING137={&MSSansBold8}License Agreement
NEW_STRING138={&Tahoma8}Click Remove to remove [ProductName] from your computer. After removal, this program will no longer be available for use.
NEW_STRING139={&Tahoma8}If you want to review or change any settings, click Back.
NEW_STRING140={&Tahoma8}&Remove
NEW_STRING141={&Tahoma8}You have chosen to remove the program from your system.
NEW_STRING142={&TahomaBold10}Remove the Program
NEW_STRING143=A previous version of VirusScan has been found on your system. The previous version will be removed during installation.
NEW_STRING144={&TahomaBold10}Previous Version Detected
NEW_STRING145=Preserve On Access Settings
NEW_STRING146=Selecting this checkbox will preserve the following Vshield settings from your previous version:
Enabled / Disabled
Exclusions
Extensions to be scanned
Logging / log locations
Hueristic scanning
NEW_STRING147=If you do not want the previous version removed, click the Cancel button to exit the installation.
NEW_STRING148=*Note: Preserve Settings is available only for VirusScan for Windows 95 and Windows 98, v4.0.1 and later
NEW_STRING149=Preserve Settings
NEW_STRING150=[SYMCPRODUCTNAME]
NEW_STRING151=[OUTLOOKSCANNAME]
NEW_STRING152=[CAPRODUCTNAME]
NEW_STRING153=[TRENDPRODUCTNAME]
NEW_STRING154=Remove Software Listed Above
NEW_STRING155=[AVTKPRODUCTNAME]
NEW_STRING156=The following software must be removed to avoid potential problems
NEW_STRING157={\TahomaBold10}Incompatible Software Found
NEW_STRING158=The installation has found software that is incompatible. The following software must be removed to ensure VirusScan will perform optimally. If you choose not to remove the incompatible software your system may not function properly.
NEW_STRING159={&Tahoma8}[INSTALLDIR]
NEW_STRING160={&Tahoma8}Install [ProductName] to:
NEW_STRING161={&Tahoma8}Click Next to install to this folder, or click Change to install to a different folder.
NEW_STRING162={&MSSansBold8}Destination Folder
IDS_ACTIONTEXT_1=Action
IDS_ACTIONTEXT_2=Searching for installed applications
IDS_ACTIONTEXT_3=Property: [1], Signature: [2]
IDS_ACTIONTEXT_4=Binding executables
IDS_ACTIONTEXT_5=File: [1]
IDS_ACTIONTEXT_6=Searching for qualifying products
IDS_ACTIONTEXT_7=Creating Default Tasks
IDS_ACTIONTEXT_8=Creating Default Tasks
IDS_ACTIONTEXT_9=Creating Default Tasks
IDS_ACTIONTEXT_10=Creating Default Tasks
IDS_ACTIONTEXT_11=Creating Default Tasks
IDS_ACTIONTEXT_12=Creating Default Tasks
IDS_ACTIONTEXT_13=Creating Default Tasks
IDS_ACTIONTEXT_14=Creating Default Tasks
IDS_ACTIONTEXT_15=Creating Default Tasks
IDS_ACTIONTEXT_16=Creating Default Tasks
IDS_ACTIONTEXT_17=Removing previous version of VirusScan
IDS_ERROR_23=Error reading from file: [2]. {{ System error [3].}} Verify that the file exists and that you can access it.
IDS_ERROR_24=Cannot create the file [3]. A directory with this name already exists. Cancel the installation and try installing to a different location.
IDS_ERROR_25=Please insert the disk: [2]
IDS_ERROR_26=The installer has insufficient privileges to access this directory: [2]. The installation cannot continue. Log on as an administrator or contact your system administrator.
IDS_ERROR_27=Error writing to file [2]. Verify that you have access to that directory.
IDS_ERROR_28=Error reading from file [2]. Verify that the file exists and that you can access it.
IDS_ERROR_29=Another application has exclusive access to the file [2]. Please shut down all other applications, then click Retry.
IDS_ERROR_30=There is not enough disk space to install thi file [2]. Free some disk space and click Retry, or click Cancel to exit.
IDS_ERROR_31=Source file not found: [2]. Verify that the file exists and that you can access it.
IDS_ERROR_32=Error reading from file: [3]. {{ System error [2].}} Verify that the file exists and that you can access it.
IDS_ERROR_33=Error writing to file: [3]. {{ System error [2].}} Verify that you have access to that directory.
IDS_ERROR_34=Source file not found{{(cabinet)}}: [2]. Verify that the file exists and that you can access it.
IDS_ERROR_35=Cannot create the directory [2]. A file with this name already exists. Please rename or remove the file and click Retry, or click Cancel to exit.
IDS_ERROR_36=The volume [2] is currently unavailable. Please select another.
IDS_ERROR_37=The specified path [2] is unavailable.
IDS_ERROR_38=Unable to write to the specified folder [2].
IDS_ERROR_39=A network error occurred while attempting to read from the file [2]
IDS_ERROR_40=An error occurred while attempting to create the directory [2]
IDS_ERROR_41=A network error occurred while attempting to create the directory [2]
IDS_ERROR_42=A network error occurred while attempting to open the source file cabinet [2].
IDS_ERROR_43=The specified path is too long [2].
IDS_ERROR_44=The Installer has insufficient privileges to modify the file [2].
IDS_ERROR_45=A portion of the path [2] exceeds the length allowed by the system.
IDS_ERROR_46=The path [2] contains words that are not valid in folders.
IDS_ERROR_47=The path [2] contains an invalid character.
IDS_ERROR_51=Could not create key [2]. {{ System error [3].}} Verify that you have sufficient access to that key, or contact your support personnel.
IDS_ERROR_52=Could not open key: [2]. {{ System error [3].}} Verify that you have sufficient access to that key, or contact your support personnel.
IDS_ERROR_53=Could not delete value [2] from key [3]. {{ System error [4].}} Verify that you have sufficient access to that key, or contact your support personnel.
IDS_ERROR_54=Could not delete key [2]. {{ System error [3].}} Verify that you have sufficient access to that key, or contact your support personnel.
IDS_ERROR_55=Could not read value [2] from key [3]. {{ System error [4].}} Verify that you have sufficient access to that key, or contact your support personnel.
IDS_ERROR_56=Could not write value [2] to key [3]. {{ System error [4].}} Verify that you have sufficient access to that key, or contact your support personnel.
IDS_ERROR_57=Could not get value names for key [2]. {{ System error [3].}} Verify that you have sufficient access to that key, or contact your support personnel.
IDS_ERROR_58=Could not get sub key names for key [2]. {{ System error [3].}} Verify that you have sufficient access to that key, or contact your support personnel.
IDS_ERROR_59=Could not read security information for key [2]. {{ System error [3].}} Verify that you have sufficient access to that key, or contact your support personnel.
IDS_ERROR_60=Could not increase the available registry space. [2] KB of free registry space is required for the installation of this application.
IDS_ERROR_61=Another installation is in progress. You must complete that installation before continuing this one.
IDS_ERROR_62=Error accessing secured data. Please make sure the Windows Installer is configured properly and try the installation again.
IDS_ERROR_63=User [2] has previously initiated an installation for product [3]. That user will need to run that installation again before using that product. Your current installation will now continue.
IDS_ERROR_64=User [2] has previously initiated an installation for product [3]. That user will need to run that installation again before using that product.
IDS_ERROR_65=Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB. Free some disk space and retry.
IDS_ERROR_66=Are you sure you want to cancel?
IDS_ERROR_67=The file [2][3] is being held in use{ by the following process: Name: [4], ID: [5], Window Title: [6]}. Close that application and retry.
IDS_ERROR_68=The product [2] is already installed, preventing the installation of this product. The two products are incompatible.
IDS_ERROR_69=Out of disk space -- Volume: [2]; required space: [3] KB; available space: [4] KB. If rollback is disabled, enough space is available. Click Cancel to quit, Retry to check available disk space again, or Ignore to continue without rollback.
IDS_ERROR_70=Could not access network location [2].
IDS_ERROR_71=The following applications should be closed before continuing the installation:
IDS_ERROR_72=Could not find any previously installed compliant products on the machine for installing this product.
IDS_ERROR_73=The key [2] is not valid. Verify that you entered the correct key.
IDS_ERROR_74=The installer must restart your system before configuration of [2] can continue. Click Yes to restart now or No if you plan to restart later.
IDS_ERROR_75=You must restart your system for the configuration changes made to [2] to take effect. Click Yes to restart now or No if you plan to restart later.
IDS_ERROR_76=An installation for [2] is currently suspended. You must undo the changes made by that installation to continue. Do you want to undo those changes?
IDS_ERROR_77=A previous installation for this product is in progress. You must undo the changes made by that installation to continue. Do you want to undo those changes?
IDS_ERROR_78=No valid source could be found for product [2]. The Windows Installer cannot continue.
IDS_ERROR_82=You may either restore your computer to its previous state or continue the installation later. Would you like to restore?
IDS_ERROR_83=An error occurred while writing installation information to disk. Check to make sure enough disk space is available, and click Retry, or Cancel to end the installation.
IDS_ERROR_84=One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible.
IDS_ERROR_85=The path [2] is not valid. Please specify a valid path.
IDS_ERROR_86=Out of memory. Shut down other applications before retrying.
IDS_ERROR_87=There is no disk in drive [2]. Please insert one and click Retry, or click Cancel to go back to the previously selected volume.
IDS_ERROR_88=There is no disk in drive [2]. Please insert one and click Retry, or click Cancel to return to the browse dialog and select a different volume.
IDS_ERROR_89=The folder [2] does not exist. Please enter a path to an existing folder.
IDS_ERROR_90=You have insufficient privileges to read this folder.
IDS_ERROR_91=A valid destination folder for the installation could not be determined.
IDS_ERROR_92=Error attempting to read from the source installation database: [2].
IDS_ERROR_93=Scheduling reboot operation: Renaming file [2] to [3]. Must reboot to complete operation.
IDS_ERROR_94=Scheduling reboot operation: Deleting file [2]. Must reboot to complete operation.
IDS_ERROR_95=Module [2] failed to register. HRESULT [3]. Contact your support personnel.
IDS_ERROR_96=Module [2] failed to unregister. HRESULT [3]. Contact your support personnel.
IDS_ERROR_97=Failed to cache package [2]. Error: [3]. Contact your support personnel.
IDS_ERROR_98=Could not register font [2]. Verify that you have sufficient permissions to install fonts, and that the system supports this font.
IDS_ERROR_99=Could not unregister font [2]. Verify that you have sufficient permissions to remove fonts.
IDS_ERROR_100=Could not create shortcut [2]. Verify that the destination folder exists and that you can access it.
IDS_ERROR_101=Could not remove shortcut [2]. Verify that the shortcut file exists and that you can access it.
IDS_ERROR_102=Could not register type library for file [2]. Contact your support personnel.
IDS_ERROR_103=Could not unregister type library for file [2]. Contact your support personnel.
IDS_ERROR_104=Could not update the INI file [2][3]. Verify that the file exists and that you can access it.
IDS_ERROR_105=Could not schedule file [2] to replace file [3] on reboot. Verify that you have write permissions to file [3].
IDS_ERROR_106=Error removing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.
IDS_ERROR_107=Error installing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.
IDS_ERROR_108=Error removing ODBC driver [4], ODBC error [2]: [3]. Verify that you have sufficient privileges to remove ODBC drivers.
IDS_ERROR_109=Error installing ODBC driver [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.
IDS_ERROR_110=Error configuring ODBC data source [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.
IDS_ERROR_111=Service [2] ([3]) failed to start. Verify that you have sufficient privileges to start system services.
IDS_ERROR_112=Service [2] ([3]) could not be stopped. Verify that you have sufficient privileges to stop system services.
IDS_ERROR_113=Service [2] ([3]) could not be deleted. Verify that you have sufficient privileges to remove system services.
IDS_ERROR_114=Service [2] ([3]) could not be installed. Verify that you have sufficient privileges to install system services.
IDS_ERROR_115=Could not update environment variable [2]. Verify that you have sufficient privileges to modify environment variables.
IDS_ERROR_116=You do not have sufficient privileges to complete this installation for all users of the machine. Log on as an administrator and then retry this installation.
IDS_ERROR_117=Could not set file security for file [3]. Error: [2]. Verify that you have sufficient privileges to modify the security permissions for this file.
IDS_ERROR_118=Component Services (COM+ 1.0) are not installed on this computer. This installation requires Component Services in order to complete successfully. Component Services are available on Windows 2000.
IDS_ERROR_119=Error registering COM+ application. Contact your support personnel for more information.
IDS_ERROR_120=Error unregistering COM+ application. Contact your support personnel for more information.
IDS_FEATURE_SAFESOUND_2=Safe && Sound makes real-time and virus-free backups of your documents
IDS_FEATURE_CENTRAL_1=McAfee VirusScan Central
IDS_FEATURE_CENTRAL_2=Provides a centralized access interface to all VirusScan features
IDS_FEATURE_ACTIVITYLOG_1=Activity Log Service
IDS_FEATURE_ACTIVITYLOG_2=This feature provides a service to manage log files created by VirusScan
IDS_PROGRAMSMENU_FOLDER=McAfee VirusScan
NEW_STRING240={&MSSansBold8}Safe && Sound
NEW_STRING241=VirusScan includes a dynamic backup utility called Safe && Sound. Once configured, Safe && Sound makes automatic, simultaneous backups of your documents as you work on them. Safe && Sound helps you recover your files in the event that your data files become infected.
NEW_STRING242=Configure Safe && Sound
NEW_STRING243={&MSSansBold8}VirusScan Maintenance
NEW_STRING244=VirusScan helps you get your system off to the right start, by running the following programs upon completion of this interview.
NEW_STRING245=Create a Rescue Disk Set
NEW_STRING246=Run VirusScan Update
NEW_STRING247={&MSSansBold8}Scan at Startup*
NEW_STRING248={&MSSansBold8}Launch VirusScan Central
IDS_AskYesNo_0=[ProductName] [Setup]
IDS_AskYesNo_3={&Tahoma8}&No
IDS_AskYesNo_2={&Tahoma8}&Yes
IDS_AskYesNo_1=Run McAfee VirusScan Central now?
IDS_Configure1_0=*Note - This feature is not available under Windows NT, Windows ME, and Windows 2000.
IDS_Configure2_0=*Note - Safe && Sound does not support Windows NT and Windows 2000.
IDS_FEATURE_SAFESOUND_3=Safe && Sound makes real-time and virus-free backups of your documents. Safe && Sound does not support Windows 2000 and Windows NT.
IDS_FEATURE_SAFESOUND_1=Safe & Sound
IDS_SHORTCUT_README=Read Me First
IDS_README_DESCRIPTION=This document contains last minute changes to the product and documentation