home *** CD-ROM | disk | FTP | other *** search
INI File | 1994-04-27 | 24.2 KB | 451 lines |
- [Identification]
- OptionType = VIDEO
-
- [MapOfOptions]
- "VGA" = "VGA"
- "COMPAQ AVGA" = "VGA"
- "8514 MONITOR UNKNOWN" = "VGA"
- "8514 VGA MONITOR" = "VGA"
- "8514 8503 MONO" = "VGA"
- "8514 8514 GAD" = "VGA"
- "GENOA VGA" = "VGA"
- "VIDEO7 VGA" = "VGA"
- "VIDEO7 VGA DRAM" = "VIDEO7 VGA VRAM 640x480x4"
- "VIDEO7 VGA VRAM" = "VIDEO7 VGA VRAM 640x480x4"
- "TRIDENT VGA" = "TRIDENT 640x480x4"
- "TRIDENT VGA 9100" = "TRIDENT 640x480x4"
- "PARADISE VGA" = "WDVGA 640x480x4"
- "PARADISE VGA PROM" = "WDVGA 640x480x4"
- "PARADISE VGA CHIP 1F" = "WDVGA 640x480x4"
- "ATI VGA" = "VGA"
- "ATI VGA WONDDER3" = "VGA"
- "TSENGLAB VGA ET3000" = "VGA"
- "TSENGLAB VGA ET4000" = "TSENGLAB VGA ET4000 640x480x4x60"
- "CIRRUS VGA" = "VGA"
- "CIRRUS VGA 610-620 REVC" = "VGA"
- "XGA" = "XGA 640x480x8x60"
- "DELL DGX" = "DELL DGX 640x480x8"
- "S3 VGA" = "S3 VGA 640x480x8x01"
- "PRODESIGNER II" = "TSENGLAB VGA ET4000 640x480x4x60"
- "QVISION VGA" = "QVISION 640x480x8x0"
-
- [MiniportDrivers]
- s3 = !SERVICE_KERNEL_DRIVER, Video, !SERVICE_ERROR_IGNORE, 12, {s3} , 0 , "%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\Drivers\s3.sys" , 7
-
- [Identify]
- read-syms Identification
- set Status = STATUS_SUCCESSFUL
- set Identifier = $(OptionType)
- set Media = #("Source Media Descriptions", 1, 1)
- Return $(Status) $(Identifier) $(Media)
-
- [ReturnOptions]
- set Status = STATUS_FAILED
- set OptionList = {}
- set OptionTextList = {}
- set LanguageList = ^(LanguagesSupported, 1)
- Ifcontains(i) $($0) in $(LanguageList)
- goto returnoptions
- else
- set Status = STATUS_NOLANGUAGE
- goto finish_ReturnOptions
- endif
- returnoptions = +
- set OptionList = ^(Options, 0)
- set OptionTextList = ^(OptionsText$($0), 1)
- set Status = STATUS_SUCCESSFUL
- finish_ReturnOptions = +
- Return $(Status) $(OptionList) $(OptionTextList)
-
- [MapToSupportedOption]
- set Status = STATUS_FAILED
- set MappedOption = $($0)
- set OptionList = ^(MapOfOptions, 0)
- ifcontains $($0) in $(OptionList)
- set MappedOption = #(MapOfOptions, $($0), 1)
- else
- set MappedOption = "VGA"
- endif
- set Status = STATUS_SUCCESSFUL
- Return $(Status) $(MappedOption)
-
- [ServicesEntry]
- CurrentEntry = "" ? $(!LIBHANDLE) GetDevicemapValue Video \Device\Video0
-
- [InstallOption]
- set Status = STATUS_FAILED
- set DrivesToFree = {}
- set Option = $($1)
- set SrcDir = $($2)
- set AddCopy = $($3)
- set DoCopy = $($4)
- set DoConfig = $($5)
- set LanguageList = ^(LanguagesSupported, 1)
- Ifcontains(i) $($0) in $(LanguageList)
- else
- set Status = STATUS_NOLANGUAGE
- goto finish_InstallOption
- endif
- read-syms Strings$($0)
- set OptionList = ^(Options, 0)
- ifcontains $(Option) in $(OptionList)
- else
- goto finish_InstallOption
- endif
- set OptionList = ""
- set MiniportDriver = #(Options, $(Option), 1)
- set BitsPerPel = #(Options, $(Option), 2)
- set XResolution = #(Options, $(Option), 3)
- set YResolution = #(Options, $(Option), 4)
- set VRefresh = #(Options, $(Option), 5)
- set Interlaced = #(Options, $(Option), 6)
- set Type = $(#(MiniportDrivers, $(MiniportDriver), 1))
- set Group = #(MiniportDrivers, $(MiniportDriver), 2)
- set ErrorControl = $(#(MiniportDrivers, $(MiniportDriver), 3))
- set Tag = #(MiniportDrivers, $(MiniportDriver), 4)
- set InstalledDisplays = #(MiniportDrivers, $(MiniportDriver), 5)
- set VgaCompatible = #(MiniportDrivers, $(MiniportDriver), 6)
- set EventMessageFile = #(MiniportDrivers, $(MiniportDriver), 7)
- set TypesSupported = #(MiniportDrivers, $(MiniportDriver), 8)
- read-syms ServicesEntry
- detect ServicesEntry
- installtheoption = +
- ifstr(i) $(AddCopy) == "YES"
- set DoActualCopy = NO
- set FileToCheck = #(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
- LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
- ifstr(i) $(STATUS) == NO
- set DoActualCopy = YES
- goto addfiles
- endif
- ForListDo $(InstalledDisplays)
- set FileToCheck = #(Files-DisplayDLLs, $($), 2)
- LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\"$(FileToCheck)
- ifstr(i) $(STATUS) == NO
- set DoActualCopy = YES
- endif
- EndForListDo
- addfiles = +
- ifstr(i) $(DoActualCopy) == NO
- shell "subroutn.inf" DriversExist $($0) $(String1)
- ifint $($ShellCode) != $(!SHELL_CODE_OK)
- Debug-Output "VIDEO.INF: shelling DriversExist failed"
- goto finish_InstallOption
- endif
- ifstr(i) $($R0) == STATUS_CURRENT
- else-ifstr(i) $($R0) == STATUS_NEW
- set DoActualCopy = YES
- else-ifstr(i) $($R0) == STATUS_USERCANCEL
- Debug-Output "VIDEO.INF: User cancelled video installation"
- goto finish_InstallOption
- else
- Debug-Output "VIDEO.INF: Error reported in DriversExist routine in SUBROUTN.INF"
- goto finish_InstallOption
- endif
- endif
- ifstr(i) $(DoActualCopy) == YES
- shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
- ifint $($ShellCode) != $(!SHELL_CODE_OK)
- Debug-Output "VIDEO.INF: shelling DoAskSourceEx failed"
- goto finish_InstallOption
- endif
- ifstr(i) $($R0) == STATUS_SUCCESSFUL
- set SrcDir = $($R1)
- ifstr(i) $($R2) != ""
- set DrivesToFree = >($(DrivesToFree), $($R2))
- endif
- else
- Debug-Output "VIDEO.INF: User cancelled asking source."
- goto finish_InstallOption
- endif
- install Install-AddCopyOption
- ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
- Debug-Output "VIDEO.INF: Adding video files to copy list failed"
- goto finish_InstallOption
- endif
- else
- set DoCopy = NO
- endif
- endif
- ifstr(i) $(DoCopy) == "YES"
- read-syms ProgressCopy$($0)
- install Install-DoCopyOption
- ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
- Debug-Output "Copying files failed"
- goto finish_InstallOption
- else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
- set Status = STATUS_USERCANCEL
- goto finish_InstallOption
- endif
- endif
- ifstr(i) $(DoConfig) == "YES"
- shell "registry.inf" CheckSetupModify
- ifint $($ShellCode) != $(!SHELL_CODE_OK)
- goto finish_InstallOption
- endif
- ifstr(i) $($R0) != STATUS_SUCCESSFUL
- goto finish_InstallOption
- endif
- set ServiceNode = $(MiniportDriver)
- set ServiceBinary = %SystemRoot%\System32\drivers\#(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
- set ServicesValues = { +
- {Type, 0, $(!REG_VT_DWORD), $(Type) }, +
- {Start, 0, $(!REG_VT_DWORD), $(!SERVICE_SYSTEM_START) }, +
- {Group, 0, $(!REG_VT_SZ), $(Group) }, +
- {ErrorControl, 0, $(!REG_VT_DWORD), $(ErrorControl) }, +
- {Tag, 0, $(!REG_VT_DWORD), $(Tag) }, +
- {BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary) } +
- }
- set ParametersValues = { +
- {InstalledDisplayDrivers, 0, $(!REG_VT_MULTI_SZ), $(InstalledDisplays) }, +
- {VgaCompatible, 0, $(!REG_VT_DWORD), $(VgaCompatible) }, +
- {DefaultSettings.BitsPerPel, 0, $(!REG_VT_DWORD), $(BitsPerPel) }, +
- {DefaultSettings.XResolution, 0, $(!REG_VT_DWORD), $(XResolution) }, +
- {DefaultSettings.YResolution, 0, $(!REG_VT_DWORD), $(YResolution) } +
- }
- ifstr(i) $(VRefresh) != ""
- set VRefreshValue = {DefaultSettings.VRefresh, 0, $(!REG_VT_DWORD), $(VRefresh)}
- set ParametersValues = >($(ParametersValues), $(VRefreshValue))
- endif
- ifstr(i) $(Interlaced) != ""
- set InterlacedValue = {DefaultSettings.Interlaced, 0, $(!REG_VT_DWORD), $(Interlaced)}
- set ParametersValues = >($(ParametersValues), $(InterlacedValue))
- endif
- set DeviceValues = {}
- set EventLogValues = { +
- {EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
- {TypesSupported, 0, $(!REG_VT_DWORD), $(TypesSupported) } +
- }
- shell "registry.inf" MakeServicesEntry $(ServiceNode) +
- $(ServicesValues) +
- $(ParametersValues) +
- $(DeviceValues) +
- $(EventLogValues) +
- Device0
- ifint $($ShellCode) != $(!SHELL_CODE_OK)
- Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
- goto finish_InstallOption
- endif
- ifstr(i) $($R0) != STATUS_SUCCESSFUL
- Debug-Output "MakeServicesEntry failed for video"
- goto finish_InstallOption
- endif
- ifstr(i) $(CurrentEntry) != $(MiniportDriver)
- ifstr(i) $(CurrentEntry) != VGA
- ifstr(i) $(CurrentEntry) != ""
- shell "registry.inf" ModifyServicesEntry $(CurrentEntry) $(!SERVICE_DISABLED)
- ifint $($ShellCode) != $(!SHELL_CODE_OK)
- Debug-Output "Couldn't find DisableServicesEntry in registry.inf"
- goto errorconfig
- endif
- ifstr(i) $($R0) != STATUS_SUCCESSFUL
- Debug-Output "DisableServices entry failed"
- endif
- endif
- endif
- endif
- goto configdone
- errorconfig = +
- ifstr(i) $(CurrentEntry) != $(MiniportDriver)
- shell "registry.inf" ModifyServicesEntry $(MiniportDriver) $(!SERVICE_DISABLED)
- ifstr(i) $(CurrentEntry) != ""
- shell "registry.inf" ModifyServicesEntry $(CurrentEntry) $(!SERVICE_SYSTEM_START)
- endif
- endif
- goto finish_InstallOption
- configdone = +
- endif
- set Status = STATUS_SUCCESSFUL
- finish_InstallOption = +
- ForListDo $(DrivesToFree)
- LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
- EndForListDo
- Return $(Status)
-
- [Install-AddCopyOption]
- set STF_VITAL = ""
- AddSectionKeyFileToCopyList Files-DisplayMiniportDrivers +
- $(MiniportDriver) +
- $(SrcDir) +
- $(!STF_WINDOWSSYSPATH)\drivers
- ForListDo $(InstalledDisplays)
- AddSectionKeyFileToCopyList Files-DisplayDLLs +
- $($) +
- $(SrcDir) +
- $(!STF_WINDOWSSYSPATH)
- EndForListDo
- exit
-
- [Install-DoCopyOption]
- CopyFilesInCopyList
- exit
-
- [Source Media Descriptions]
- 1 = "S3 Windows NT Installation disk" , TAGFILE = disk1
-
- [Files-DisplayDLLs]
- s3 = 1,S3.DLL , SIZE=119296
-
- [Files-DisplayMiniportDrivers]
- s3 = 1,S3.SYS , SIZE=36352
-
- [LanguagesSupported]
- ENG
-
- [OptionsTextENG]
- "S3 VGA 640x480x8x1255" = "S3 2.1 640x480, 256 colors, Default VRefresh"
- "S3 VGA 640x480x8x10" = "S3 2.1 640x480, 256 colors, CR52-0 [864, 964]"
- "S3 VGA 640x480x8x11" = "S3 2.1 640x480, 256 colors, CR52-1 [864, 964]"
- "S3 VGA 640x480x8x12" = "S3 2.1 640x480, 256 colors, CR52-2 [Generic]"
- "S3 VGA 640x480x8x13" = "S3 2.1 640x480, 256 colors, CR52-3 [801,805,928]"
-
- "S3 VGA 800x600x8x1255" = "S3 2.1 800x600, 256 colors, Default VRefresh"
- "S3 VGA 800x600x8x10" = "S3 2.1 800x600, 256 colors, CR52-0 [864,964]"
- "S3 VGA 800x600x8x11" = "S3 2.1 800x600, 256 colors, CR52-1 [Generic]"
- "S3 VGA 800x600x8x12" = "S3 2.1 800x600, 256 colors, CR52-2 [Generic]"
- "S3 VGA 800x600x8x13" = "S3 2.1 800x600, 256 colors, CR52-3 [Generic]"
-
- "S3 VGA 1024x768x8x1255" = "S3 2.1 1024x768, 256 colors, Default VRefresh"
- "S3 VGA 1024x768x8x10" = "S3 2.1 1024x768, 256 colors, CR52-0 [Generic]"
- "S3 VGA 1024x768x8x11" = "S3 2.1 1024x768, 256 colors, CR52-1 [801,805,928]"
- "S3 VGA 1024x768x8x12" = "S3 2.1 1024x768, 256 colors, CR52-2 [Generic]"
- "S3 VGA 1024x768x8x13" = "S3 2.1 1024x768, 256 colors, CR52-3 [Generic]"
- "S3 VGA 1024x768x8x14" = "S3 2.1 1024x768, 256 colors, CR52-4 [864,964]"
-
- "S3 VGA 1152x864x8x255" = "S3 2.1 1152x864, 256 colors, Default VRefresh"
-
- "S3 VGA 1280x1024x8x1255" = "S3 2.1 1280x1024, 256 colors, Default VRefresh"
- "S3 VGA 1280x1024x8x10" = "S3 2.1 1280x1024, 256 colors, CR52-0 [801,805,928]"
- "S3 VGA 1280x1024x8x11" = "S3 2.1 1280x1024, 256 colors, CR52-1 [801,805,928]"
- "S3 VGA 1280x1024x8x12" = "S3 2.1 1280x1024, 256 colors, CR52-2 [Generic]"
- "S3 VGA 1280x1024x8x13" = "S3 2.1 1280x1024, 256 colors, CR52-3 [801,805,928]"
- "S3 VGA 1280x1024x8x14" = "S3 2.1 1280x1024, 256 colors, CR52-4 [864,964]"
- "S3 VGA 1280x1024x8x16" = "S3 2.1 1280x1024, 256 colors, CR52-6 [864,964]"
-
- "S3 VGA 1600x1200x8x255" = "S3 2.1 1600x1200, 256 colors, Default VRefresh"
-
- "S3 VGA 640x480x16x1255" = "S3 2.1 640x480, 64K colors, Default VRefresh"
- "S3 VGA 640x480x16x10" = "S3 2.1 640x480, 64K colors, CR52-0 [928,864,964]"
- "S3 VGA 640x480x16x11" = "S3 2.1 640x480, 64K colors, CR52-1 [928,864,964]"
- "S3 VGA 640x480x16x12" = "S3 2.1 640x480, 64K colors, CR52-2 [Generic]"
- "S3 VGA 640x480x16x13" = "S3 2.1 640x480, 64K colors, CR52-3 [805i,928]"
-
- "S3 VGA 800x600x16x1255" = "S3 2.1 800x600, 64K colors, Default VRefresh"
- "S3 VGA 800x600x16x10" = "S3 2.1 800x600, 64K colors, CR52-0 [928,964]"
- "S3 VGA 800x600x16x11" = "S3 2.1 800x600, 64K colors, CR52-1 [928,864,964]"
- "S3 VGA 800x600x16x12" = "S3 2.1 800x600, 64K colors, CR52-2 [Generic]"
- "S3 VGA 800x600x16x13" = "S3 2.1 800x600, 64K colors, CR52-3 [928,864,964]"
-
- "S3 VGA 1024x768x16x1255" = "S3 2.1 1024x768, 64K colors, Default VRefresh"
- "S3 VGA 1024x768x16x10" = "S3 2.1 1024x768, 64K colors, CR52-0 [Generic]"
- "S3 VGA 1024x768x16x11" = "S3 2.1 1024x768, 64K colors, CR52-1 [928]"
- "S3 VGA 1024x768x16x12" = "S3 2.1 1024x768, 64K colors, CR52-2 [928,864,964]"
- "S3 VGA 1024x768x16x13" = "S3 2.1 1024x768, 64K colors, CR52-3 [928,864,964]"
- "S3 VGA 1024x768x16x14" = "S3 2.1 1024x768, 64K colors, CR52-4 [864,964]"
-
- "S3 VGA 1280x1024x16x255" = "S3 2.1 1280x1024, 64K colors, Default VRefresh"
-
- "S3 VGA 1600x1200x16x255" = "S3 2.1 1600x1200, 64K colors, Default VRefresh"
-
- "S3 VGA 640x480x32x1255" = "S3 2.1 640x480, 16.7M colors, Default VRefresh"
- "S3 VGA 640x480x32x10" = "S3 2.1 640x480, 16.7M colors, CR52-0 [928,864,964]"
- "S3 VGA 640x480x32x11" = "S3 2.1 640x480, 16.7M colors, CR52-1 [928,864,964]"
- "S3 VGA 640x480x32x12" = "S3 2.1 640x480, 16.7M colors, CR52-2 [928,864,964]"
- "S3 VGA 640x480x32x22" = "S3 2.1 640x480, 16.7M colors, CR52-2 [805i]"
- "S3 VGA 640x480x32x13" = "S3 2.1 640x480, 16.7M colors, CR52-3 [928]"
-
- "S3 VGA 800x600x32x1255" = "S3 2.1 800x600, 16.7M colors, Default VRefresh"
- "S3 VGA 800x600x32x10" = "S3 2.1 800x600, 16.7M colors, CR52-0 [928,964]"
- "S3 VGA 800x600x32x11" = "S3 2.1 800x600, 16.7M colors, CR52-1 [928]"
- "S3 VGA 800x600x32x12" = "S3 2.1 800x600, 16.7M colors, CR52-2 [928,864,964]"
- "S3 VGA 800x600x32x22" = "S3 2.1 800x600, 16.7M colors, CR52-2 [805i]"
- "S3 VGA 800x600x32x13" = "S3 2.1 800x600, 16.7M colors, CR52-3 [928,864,964]"
-
- "S3 VGA 1024x768x32x1255" = "S3 2.1 1024x768, 16.7M colors, Default VRefresh"
- "S3 VGA 1024x768x32x10" = "S3 2.1 1024x768, 16.7M colors, CR52-0 [928,964]"
- "S3 VGA 1024x768x32x11" = "S3 2.1 1024x768, 16.7M colors, CR52-1 [928]"
- "S3 VGA 1024x768x32x12" = "S3 2.1 1024x768, 16.7M colors, CR52-2 [928,964]"
- "S3 VGA 1024x768x32x13" = "S3 2.1 1024x768, 16.7M colors, CR52-3 [928,964]"
- "S3 VGA 1024x768x32x14" = "S3 2.1 1024x768, 16.7M colors, CR52-4 [964]"
-
-
- [Options]
- "S3 VGA 640x480x8x1255" = s3, 8, 640, 480 , 255 , 0
- "S3 VGA 640x480x8x10" = s3, 8, 640, 480 , 0 , 0
- "S3 VGA 640x480x8x11" = s3, 8, 640, 480 , 1 , 0
- "S3 VGA 640x480x8x12" = s3, 8, 640, 480 , 2 , 0
- "S3 VGA 640x480x8x13" = s3, 8, 640, 480 , 3 , 0
- "S3 VGA 800x600x8x1255" = s3, 8, 800, 600 , 255 , 0
- "S3 VGA 800x600x8x10" = s3, 8, 800, 600 , 0 , 0
- "S3 VGA 800x600x8x11" = s3, 8, 800, 600 , 1 , 0
- "S3 VGA 800x600x8x12" = s3, 8, 800, 600 , 2 , 0
- "S3 VGA 800x600x8x13" = s3, 8, 800, 600 , 3 , 0
- "S3 VGA 1024x768x8x1255" = s3, 8, 1024, 768 , 255 , 0
- "S3 VGA 1024x768x8x10" = s3, 8, 1024, 768 , 0 , 0
- "S3 VGA 1024x768x8x11" = s3, 8, 1024, 768 , 1 , 0
- "S3 VGA 1024x768x8x12" = s3, 8, 1024, 768 , 2 , 0
- "S3 VGA 1024x768x8x13" = s3, 8, 1024, 768 , 3 , 0
- "S3 VGA 1024x768x8x14" = s3, 8, 1024, 768 , 4 , 0
- "S3 VGA 1152x864x8x255" = s3, 8, 1152, 864 , 255 , 0
- "S3 VGA 1280x1024x8x1255" = s3, 8, 1280, 1024 , 255 , 0
- "S3 VGA 1280x1024x8x10" = s3, 8, 1280, 1024 , 0 , 0
- "S3 VGA 1280x1024x8x11" = s3, 8, 1280, 1024 , 1 , 0
- "S3 VGA 1280x1024x8x12" = s3, 8, 1280, 1024 , 2 , 0
- "S3 VGA 1280x1024x8x13" = s3, 8, 1280, 1024 , 3 , 0
- "S3 VGA 1280x1024x8x14" = s3, 8, 1280, 1024 , 4 , 0
- "S3 VGA 1280x1024x8x16" = s3, 8, 1280, 1024 , 6 , 0
- "S3 VGA 1600x1200x8x255" = s3, 8, 1600, 1200 , 255 , 0
- "S3 VGA 640x480x16x1255" = s3, 16, 640, 480 , 255 , 0
- "S3 VGA 640x480x16x10" = s3, 16, 640, 480 , 0 , 0
- "S3 VGA 640x480x16x11" = s3, 16, 640, 480 , 1 , 0
- "S3 VGA 640x480x16x12" = s3, 16, 640, 480 , 2 , 0
- "S3 VGA 640x480x16x13" = s3, 16, 640, 480 , 3 , 0
- "S3 VGA 800x600x16x1255" = s3, 16, 800, 600 , 255 , 0
- "S3 VGA 800x600x16x10" = s3, 16, 800, 600 , 0 , 0
- "S3 VGA 800x600x16x11" = s3, 16, 800, 600 , 1 , 0
- "S3 VGA 800x600x16x12" = s3, 16, 800, 600 , 2 , 0
- "S3 VGA 800x600x16x13" = s3, 16, 800, 600 , 3 , 0
- "S3 VGA 1024x768x16x1255" = s3, 16, 1024, 768 , 255 , 0
- "S3 VGA 1024x768x16x10" = s3, 16, 1024, 768 , 0 , 0
- "S3 VGA 1024x768x16x11" = s3, 16, 1024, 768 , 1 , 0
- "S3 VGA 1024x768x16x12" = s3, 16, 1024, 768 , 2 , 0
- "S3 VGA 1024x768x16x13" = s3, 16, 1024, 768 , 3 , 0
- "S3 VGA 1024x768x16x14" = s3, 16, 1024, 768 , 4 , 0
- "S3 VGA 1280x1024x16x255" = s3, 16, 1280, 1024 , 255 , 0
- "S3 VGA 1600x1200x16x255" = s3, 16, 1600, 1200 , 255 , 0
- "S3 VGA 640x480x32x1255" = s3, 32, 640, 480 , 255 , 0
- "S3 VGA 640x480x32x10" = s3, 32, 640, 480 , 0 , 0
- "S3 VGA 640x480x32x11" = s3, 32, 640, 480 , 1 , 0
- "S3 VGA 640x480x32x12" = s3, 32, 640, 480 , 2 , 0
- "S3 VGA 640x480x32x22" = s3, 32, 640, 480 , 2 , 0
- "S3 VGA 640x480x32x13" = s3, 32, 640, 480 , 3 , 0
- "S3 VGA 800x600x32x1255" = s3, 32, 800, 600 , 255 , 0
- "S3 VGA 800x600x32x10" = s3, 32, 800, 600 , 0 , 0
- "S3 VGA 800x600x32x11" = s3, 32, 800, 600 , 1 , 0
- "S3 VGA 800x600x32x12" = s3, 32, 800, 600 , 2 , 0
- "S3 VGA 800x600x32x22" = s3, 32, 800, 600 , 2 , 0
- "S3 VGA 800x600x32x13" = s3, 32, 800, 600 , 3 , 0
- "S3 VGA 1024x768x32x1255" = s3, 32, 1024, 768 , 255 , 0
- "S3 VGA 1024x768x32x10" = s3, 32, 1024, 768 , 0 , 0
- "S3 VGA 1024x768x32x11" = s3, 32, 1024, 768 , 1 , 0
- "S3 VGA 1024x768x32x12" = s3, 32, 1024, 768 , 2 , 0
- "S3 VGA 1024x768x32x13" = s3, 32, 1024, 768 , 3 , 0
- "S3 VGA 1024x768x32x14" = s3, 32, 1024, 768 , 4 , 0
-
- [ProgressCopyENG]
- ProCaption = "Windows NT Setup"
- ProCancel = "Cancel"
- ProCancelMsg = "Windows NT is not correcly installed. Are you sure you want "+
- "to cancel copying files?"
- ProCancelCap = "Setup Message"
- ProText1 = "Copying:"
- ProText2 = "To:"
-
- [StringsENG]
- String1 = "Display"
- String2 = "Please enter the full path to the Windows NT Display "+
- "driver files. If you want to install files from the "+
- "original Setup floppy disks, type a drive letter (such "+
- "as A:) and Setup will prompt you for the correct disk. "+
- "Then choose Continue."
-