100 Click this button to install |1 software to the specified destination directory.
101 Click this button to install |1 software to your computer.
200 Welcome to the |1 installation program.
301 Enter or select a destination directory.
302 The destination directory:
303 does not exist. Do you want the directory to be created?
304 Change Directory
400 An error occurred while calculating required disk space.
401 Cannot read drive
402 Please verify the drive door is closed and that the disk is formatted and free of errors.
403 Could not open the file named:
407 Could not create directory: |1
411 Are you sure you want to Exit?
412 |1 Setup was interrupted before your new software was fully installed.
413 You can run |1 Setup in its entirety at a later time to complete the installation.
414 Setup is not yet complete.
415 If you quit now, this product will not be correctly installed.
416 Quit the setup of this product?
417 |1 Setup was completed successfully.
418 |1 Setup was not completed successfully.
419 Error determining allocation unit for drive
420 is in the Setup source files directory. Please type a different directory.
423 Please insert the disk labeled:
424 'Disk
425 ' into drive
426 Section:
427 Invalid line in setup information file!
428 The specified directory:
429 is invalid, incomplete, or write protected. Please type a full path with drive letter; for example 'C:\APPS'.
430 The directory doesn't exist!
431 Invalid Directory Name
432 The destination file is write protected.
433 The destination file in in-use. Please ensure that all other applications are closed.
434 Out of space on destination drive |1
435 An access violation occurred while copying the file.
436 A sharing violation occurred while copying the file.
437 Out of memory trying to copy the file.
438 Cannot create temporary file.
439 Cannot delete existing destination file.
440 Cannot rename temporary file.
441 Cannot read source file.
442 Cannot read destination file attributes.
443 Internal copy error.
444 The file could not be installed.
445 Please check the connection to drive
446 If you ignore a copy error, the file will not be copied. The application may not function properly as a result. Do you want to ignore the error?
449 Cannot read network path '|1'.
450 Please verify that this path is correct and that you have permission to access it.
451 Application removal logfile '|1' not found. Unable to continue.
452 Invalid command-line parameters. Unable to continue.
453 Application removal executable '|1' not found. Unable to continue.
455 Error registering the application removal executable with Windows
460 Please run setup again and select a new location for application files.
462 An error occurred trying to update the Windows registration database.
463 Microsoft Shared\
465 An error occurred trying to create the program group '|1'
466 An error occurred trying to create a program icon for '|1'
467 An error occurred trying to copy '|1' to the application directory
468 The file '|1' could not be registered because it was not found.
469 Windows was unable to run the program '|1'. Your system may be low on memory, or the program may not have been found.
470 Error: 'SETUP.LST' contains no information on how to register the remote component '|1'. This information should have been found in a '|2' key in SETUP.LST
473 Cannot copy file, Destination Path is too long.
474 Cannot create Uninstall Icon, Destination Path is too long.
475 No icon was specified in SETUP.LST for |1. Do you want to continue without creating this icon? Click Yes to continue. Click No to Exit Setup.
476 Please launch setup again after you have installed Microsoft Access 2000 or Microsoft Access 2000 Runtime.
477 Setup is unable to start Microsoft SQL Server 2000 Desktop Engine (MSDE).
478 Setup has detected errors in the installed version of the modSystem database in SQL Server. Verify that the modSystem database is a valid database in SQL Server.
479 An application with the same name already exists. Do you want to replace it?
480 Unable to install the SQL Server application. Some possible causes are a lost connection, permissions problems, or the database has been modSystem has been deleted or dropped. For assistance, contact your SQL Server administrator.
500 Setup was unable to determine a valid default destination directory. You will need to specify a destination directory.
501 Setup is checking for necessary disk space...
502 Setup is creating program icons...
503 Setup is updating your system...
505 |1 Setup
506 The SETUP.LST file is corrupt or could not be found.
507 An unexpected setup error has occurred!
509 Setup error: Missing 'CommitAction()' or 'AbortAction()'.
510 Remote Automation Management
511 Automation Manager
512 RemAuto Connection Manager
514 Installing Data Access components...
515 Your system needs to be rebooted to update system settings.\n\nWould you like to reboot your system now?
516 Your application may not work correctly until you have rebooted your system.
517 Installing Access Runtime...
518 Installing Office System Pack...
519 Installing Microsoft SQL Server 2000 Desktop Engine (MSDE)...
520 Installing SQL Template files...
521 Your system needs to be rebooted to update system settings.\nSetup will continue after reboot.
525 The application you are installing requires Microsoft Access 2000. Setup will now close and launch the Microsoft Access 2000 Runtime setup program.
526 The application you are installing requires Microsoft Access 2002. Setup cannot continue.
527 The application you are installing requires Microsoft Access 2000 Service Release 1. Setup has detected an older version of Microsoft Access 2000 Runtime. Would you like to upgrade now?
528 {00180409-78e1-11d2-b60f-006097c998e7}
529 {004F0409-78e1-11d2-b60f-006097c998e7}
530 The application you are installing requires updated system components. To continue, install the Office System Pack. For assistance, contact your application provider.
531 The Office System Pack cannot be installed on this system because the languages are not the same. Install the Office System Pack for the appropriate language on your computer. For assistance, contact your application provider.
532 The application you are installing requires Microsoft SQL Server 2000.
533 The application you are installing requires Microsoft Internet Explorer Version 5 or later.
534 The Office System Pack cannot be installed on this system because it requires Windows NT 4.0 Service Pack 6 or later.
600 Error determining disk space free for drive
701 Directory:
702 &Change Directory
703 E&xit Setup
704 Begin the installation by clicking the button below.
705 Cancel
706 Destination File:
707 &Install Now
708 &Change Drive
709 Drive
710 Space Available
711 Space Needed
712 Space Required
713 There is not enough free disk space on one or more drives.
714 OK
715 Dri&ves:
716 &Directories:
717 &Path:
718 Setup cannot install system files or update shared files if they are in use. Before proceeding, we recommend that you close any applications you may be running.
719 Click here to begin setup
800 |1 - Choose Program Group
801 Setup will add items to the group shown in the Program Group box. You can enter a new group name or select one from the Existing Groups list.
802 &Program Group:
803 E&xisting Groups:
804 &Continue
805 A program group name must be less than |1 characters long and cannot contain any of the following characters: |2
900 Network &Address
901 Network &Protocol
902 &Continue
903 E&xit Setup
904 Remote ActiveX Component Configuration
905 Please fill in the requested configuration information about the following remote component:
906 The protocol sequence |1 (|2) is not supported or available on this machine
907 The protocol sequence '|1' ('|2') is invalid
908 An unexpected error occurred while determining the protocol sequences available on this machine
909 Setup error: An error occurred trying to read protocols from the SETUP.LST file.
910 None of the protocols needed by this application appear to be available or installed on this machine.
911 In order to run Setup successfully, you will need to first install one of the following network protocol sequences:
912 This application will not be able to access the remote component '|1' until the protocol '|2' is installed.
1000 Version Conflict
1001 A file being copied is not newer than the file currently on your system. It is recommended that you keep your existing file.
1002 File name: '|1'
1003 Description: '|1'
1004 Your version: '|1'
1005 Do you want to keep this file?
1006 No to &All
1007 &Yes
1008 &No
1100 Choose Database Server
1101 Please choose an existing database server for this application, or choose "new" to install to a new instance of MSDE. Creating a new instance of MSDE may affect available system resources and response times for your applications. Note that this option is not available if MSDE was not included with the application.
1102 Select a server and click OK:
1103 &New...
1104 OK
1105 Cancel
1106 This application requires the Microsoft SQL Server 2000 Desktop Engine (MSDE). Are you sure you want to cancel Setup?
1107 Choose MSDE Installation Location and Name
1108 SQL Instance Name
1109 Microsoft SQL Server
1110 The SQL Instance name is too long. Select a name that is 32 bytes or less.
1111 No SQL Instance name is specified. To continue, enter a name.
1112 The SQL Instance name specified is reserved and cannot be used. Select a different name.
1113 The SQL Instance name starts with invalid character. Choose a valid name and try again.
1114 The SQL Instance name contains an invalid character. Choose a valid name and try again.
1115 An SQL Instance with same name already exists. Select a different name and try again.
1200 Application Properties
1201 Application &Title:
1202 Database &Server:
1203 Database &Name:
1204 Web &URL:
1205 Enter a title for the application to continue.
1206 Specify a database name to continue.
1207 This solution requires appropriate values for installation. Are you sure you want to cancel Setup?
1208 Unable to update the application properties. Some possible causes are a lost connection, permissions problems, or another user has deleted the application. Contact your server administrator for further assistance.
1209 A Web URL named '<<URL>>' does not exist on the server. Choose a valid name and try again.
1210 The Web name you specified is invalid. Enter a valid URL name to continue.
1211 You must be a member of the dbcreators SQL Server role on the database server to create an application database. Contact your SQL Server administrator to be added to that role.
1212 A database named '<<DatabaseName>>' already exists on the server. Choose a different name to continue.
1213 Unable to connect to the specified SQL Server. For assistance, contact your SQL Server administrator.
1214 This database name is does not conform to SQL naming requirements. You cannot use the following characters in the name: ; \ '. Select a different name and try again.
1215 Specify the Solution Name, Database Name, and Web location to install this solution.
1216 The server you have chosen does not have the necessary Workflow Services for SQL Server installed to support this application. Choose a SQL Server that has workflow components installed.
1217 Unable to configure the SQL Server for installation of this application. Some possible causes are a lost connection, permissions problems, or the server is missing prerequisites. Contact your server administrator for further assistance.
2000 File currently on disk was already up to date
2001 File was not found or was an older version -- new file copied
2002 ERROR:
2003 WARNING:
2004 DURING THIS ACTION:
2005 Error writing to logfile '|1'
2006 Setup fatal error: Unable to generate installation log file.
2007 PLEASE DO NOT MODIFY OR DELETE THIS FILE!
2008 This file contains information about the installation of an application.
2009 It will be used to automatically remove all application components from your computer if you choose to do so.
2010 There was an unexpected problem trying to create or write to the logfile '|1'. Error number is |2.
2011 Out of memory trying to create or write to the logfile '|1'
2012 User Responded with '|1'
2013 Error attempting to run the application removal program to remove temporary installation files.
2014 Setup will now start the application removal utility to remove temporary installation files.
2100 OK
2101 Cancel
2102 Abort
2103 Retry
2104 Ignore
2105 Yes
2106 No
2107 (Unknown)
2200 An error occurred while registering the file '|1'
2201 Unexpected error while registering file '|1'
2202 Could not initialize OLE in order to register file '|1'
2203 LoadLibrary() failed while registering file '|1'
2204 No entrypoint for DllRegisterServer() was found in '|1'
2205 DllRegisterServer() in the file '|1' returned failure
2206 One possible cause for this error is that RPC may not be installed on your computer.
2207 If this is the problem, then you will need to exit Setup, install RPC, and restart Setup.
2208 The file '|1' was not copied because it is intended for use under Windows NT 3.51 only. It is not needed under Windows 95 or NT 4.0.
2209 \/:*?"<>|
2210 DISK
2211 Cannot find the source file '|1' to install.
2212 Could not register the TLB file '|1'.
2213 The file '|1' was not copied because it is intended for use under Windows 95 only. It is not needed under Windows NT 3.51 or 4.0.
2214 The file '|1' was not copied because it is intended for use under Windows 95 and NT 4.x only. It is not needed under Windows NT 3.51.
2215 The file '|1' was not copied because it is intended for use under Windows NT 3.51 only. It is not needed under Windows 95 or NT 4.x.
2216 Cannot update system file '|1'. You may not have permission to update system files on this machine.
