home *** CD-ROM | disk | FTP | other *** search
- This is some information about the led-board Roman Dolejsi
- (roman@sorry.vse.cz) added support for.
-
- -----------------------------------------------------------------------------
-
-
-
- LED Meter on LPT port
- ---------------------
- Here is the circuit plane for LED meter on LPT. It's very cheap and everyone
- can even do pass-through circuit to have it coexisting with printer or whatever.
- The resistor values are informative only, everybody can tune them to have
- intensity he/she wants (of course only if LEDs can live with that ;-)
-
- signal pin 150Ω (green LED, located most on the left/down)
- D0 2 >───███──────|>|────────┐ DF0
- 150Ω (green LED) │
- D1 3 >───███──────|>|────────┤ DF1
- 150Ω (green LED) │
- D2 4 >───███──────|>|────────┤ DF2
- 150Ω (green LED) │
- D3 5 >───███──────|>|────────┤ DF3
- 150Ω (green LED) │
- D4 6 >───███──────|>|────────┤
- 150Ω (yellow LED) │
- D5 7 >───███──────|>|────────┤ HardDrive
- 150Ω (orange LED) │
- D6 8 >───███──────|>|────────┤
- 150Ω (red LED) │
- D7 9 >───███──────|>|────────┤ Power
- │
- GND 20 >───────────────────────┘
-
-
- Bulb Meter on LPT port (LED Meter compatible)
- ---------------------------------------------
- This is a circuit plane for building meter on LPT consisting of bulbs. You
- can make this one to have big lights in your room to enjoy emulation. It has
- been successfully tested with 100W bulbs and even 200W is ok. Of course you
- will be probably unable to drive it with hallogen lights :-)) but.. who knows..
- This circuit is projected for 220V/50Hz. It consists of two separated parts,
- one as the TTL driver working on LPT's 5V and the second one with the bulbs
- working on 220V. Warning! It's dangerous touching the circuit behind the opto.
- Please isolate it and make sure nobody can touch it... Values needn't be
- strictly those drawn on the circuit. When it doesn't shine try to decrease
- resistor values.
- This circuitry is property of Petr Slechta (Piitr). Building of it is on your
- own risk. Anyway, questions about it can be send to xslecht1@hwlab.felk.cvut.cz.
- Thyristor has czech naming convention. Don't know other equivalents but the
- only needed requirement is that it must be 1A capable.
-
- 5V part | 220V part !!! don't touch while running !!!
- |
- signal pin anode┌──|───┐collector
- D0 2 >─███──────┤ OPTO ├────┐ (green, first)
- 2kΩ ┌┤ | ├────────███───────┐gate BULB 220V,max 200W
- cathode│└──|───┘ │ 1k8Ω ┌|<|────────(X)──┐ DF0
- │ | emitter│ cathode│ anode │
- │┌──|───┐ │ │ THYRISTOR │
- D1 3 >─███──────┤ | ├────┤ │ KT505 (1A) │
- ├┤ | ├────────███───────┐ │
- │└──|───┘ │ ├|<|────────(X)──┤ DF1
- │┌──|───┐ │ │ │
- D2 4 >─███──────┤ | ├────┤ │ │
- ├┤ | ├────────███───────┐ │
- │└──|───┘ │ ├|<|────────(X)──┤ DF2
- │┌──|───┐ │ │ │
- D3 5 >─███──────┤ | ├────┤ │ │
- ├┤ | ├────────███───────┐ │
- │└──|───┘ │ ├|<|────────(X)──┤ DF3
- │┌──|───┐ │ │ │
- D4 6 >─███──────┤ | ├────┤ │ │
- ├┤ | ├────────███───────┐ │
- │└──|───┘ │ ├|<|────────(X)──┤
- │┌──|───┐ │ │ │
- D5 7 >─███──────┤ | ├────┤ │ │
- ├┤ | ├────────███───────┐ │
- │└──|───┘ │ ├|<|────────(X)──┤ HardDrive
- │┌──|───┐ │ │ │
- D6 8 >─███──────┤ | ├────┤ │ │
- ├┤ | ├────────███───────┐ │
- │└──|───┘ │ ├|<|────────(X)──┤
- │┌──|───┐ │ │ │
- D7 9 >─███──────┤ | ├────┤ │ │
- GND 20 >─────────┴┤ | ├────────███───────┐ │ Power
- └──|───┘ │ ├|<|────────(X)──┴─────┐
- | │ │ │
- | └────────────────────┐ │
- 5V part | 220V part │ZENER │ │
- ├─|>|───┤ │
- │ 15V │ │
- │ █ 50Ω │
- │ │ │
- │ └─|<|─┐ non │
- │ │ el-lyt!│
- (phase) │ │1µF/300V│
- >───────────────────────────────────┴──███────────┴┬─┤├──┬─┤
- 100Ω │ │ │
- 220V/50Hz └─███─┘ │
- 500kΩ │
- >──────────────────────────────────────────────────────────┘
-
-