home *** CD-ROM | disk | FTP | other *** search
/ com!online 2003 October / com10_03_2.iso / studioline / readme.txt < prev    next >
Encoding:
Text File  |  2003-07-04  |  5.0 KB  |  132 lines

  1.                         StudioLine
  2.                         ==========
  3.  
  4. This document describes how to install StudioLine from CD-ROM.
  5.  
  6.  
  7.     Installing StudioLine
  8.     ---------------------
  9.  
  10. A couple of Microsoft components are required to run StudioLine.
  11. For your convenience, these are included on the CD-ROM.  These
  12. components are: Internet Explorer 4.0 or higher, and MDAC 2.5.2 or
  13. higher.  Some, or all of these, might already be installed on your 
  14. system. This depends on the exact version of your operating 
  15. system and all other applications you have installed.  StudioLine 
  16. Setup will determine which components are missing and will help 
  17. you install them if necessary.  If you don't want to manually
  18. install some other version of these components, simply insert the 
  19. CD-ROM (or double-click Setup.exe if the Autorun feature of your 
  20. CD-ROM drive has been disabled) and follow the on-screen 
  21. instructions.
  22.  
  23. Once the installation is complete, please fill out and mail the
  24. registration card.
  25.  
  26.  
  27.  
  28.     Starting the Application
  29.     ------------------------
  30.  
  31. Just click the Start button, choose Programs and select
  32. StudioLine.
  33.  
  34.  
  35.     Installation Support
  36.     --------------------
  37.  
  38. If Setup does not complete the installation successfully, we
  39. recommend that you take the following steps before contacting
  40. H&M Systems Software for assistance:
  41.  
  42. - Double check the system requirements listed on the
  43.   packaging.
  44. - Save your work in progress and exit Windows.
  45. - Shut down your system and restart it after 3 seconds.
  46. - Close all applications -- the Taskbar should be empty.
  47. - Rerun Setup.
  48.  
  49. If Setup still does not run properly, it may be affected by
  50. other hardware or software that is installed on your computer.
  51. Windows help contains troubleshooting aids to help you determine
  52. the cause of the problem.
  53.  
  54. To use the Windows troubleshooting wizards:
  55.  
  56. - Click the Start button.
  57. - Click Help.
  58. - At the Contents tab, click Troubleshooting, and then
  59.   pick a topic from the list.
  60.  
  61. If you have difficulty installing or operating this software,
  62. you may telephone H&M Systems Software's installation hotline at
  63. 1-201-934-3414, Ext. 3.  Please have your PC turned on and the
  64. StudioLine CD in the drive.  Installation support is provided 
  65. from 9:00 a.m. to 5:00 p.m. Eastern Time, Monday through Friday.  
  66. Please note that you have thirty days from your first call to 
  67. take advantage of installation support.
  68.  
  69. Registered users may also contact H&M Systems Software via 
  70. electronic mail 24 hours a day.  Consult the FAQ section in
  71. the online help for further information.
  72.  
  73.  
  74.  
  75.  
  76.     Fine-tuning the Installation
  77.     ----------------------------
  78.  
  79. In case you want to install other versions of the Microsoft
  80. components, here's how to:
  81.  
  82. - MDAC 2.5.2: this component exists in various languages. 
  83.   Only Windows 2000 and Windows Millennium Edition include
  84.   MDAC 2.5.2 automatically (Windows XP includes MDAC 2.7). 
  85.   StudioLine Setup will determine the language of your 
  86.   operating system and will install the corresponding 
  87.   MDAC version.  If your operating system is in a language 
  88.   other than English, French, German, or Italian,
  89.   you might want to download the appropriate version from
  90.   Microsoft's web site.  For space reasons, we cannot provide 
  91.   all versions on the StudioLine CD-ROM.  StudioLine Setup
  92.   will install the English version for operating systems
  93.   in languages other than the above.  MDAC will work just fine,
  94.   but any messages it might issue will be in English language. 
  95.   
  96.   If you want to install a newer version of MDAC than 2.5.2,
  97.   this is just fine as well.  Note, however, that we cannot
  98.   provide support if you installed a beta version of MDAC.
  99.   (At the time of writing this, MDAC 2.7 is the newest
  100.   non-beta version.)
  101.  
  102.  
  103. - Internet Explorer: StudioLine requires a version of Internet 
  104.   Explorer of 4.0 or higher to display the online help files. 
  105.   Internet Explorer is not needed to run StudioLine itself, 
  106.   although there should be a browser capable of displaying DHTML 
  107.   to view published pages.  Currently, two browser families 
  108.   are supported by StudioLine: Internet Explorer 4.0 or higher, 
  109.   and Netscape 4.0 or higher.  Both families' newest members
  110.   (Internet Explorer 6.0 and Netscape 7.0) are included on the
  111.   StudioLine CD-ROM in English, French, German and Italian.
  112.   StudioLine Setup will offer these versions if it determines 
  113.   that older versions are currently installed. StudioLine will 
  114.   call for the installation of Internet Explorer if it is not 
  115.   already installed, as it is required to display the online 
  116.   help files.
  117.  
  118.  
  119.  
  120.  
  121.  
  122.  
  123.  
  124. This and all copies of the software are proprietary products of
  125. H&M Systems Software, Inc. and are protected under U.S. and 
  126. international copyright law.  Therefore you must treat the 
  127. software and accompanying written materials like any other 
  128. copyrighted material: you may not copy any portion of them, 
  129. but you may transfer the software to a single hard disk, 
  130. provided you keep the original disk(s) solely for backup 
  131. or archival purposes.
  132.