Cardinal Internet Access Solutions/Cardinal_Internet_Access_Solutions(1996-08-19).iso/files/internet/slipnet/slipnet.z/LOGIN.BAK

Text File | 1995-03-16 | 6KB | 252 lines

# Slip.Net LOGIN.CMD file for use with The Slip.Net Internet Launcher
# version 1.1h - 03/06/95  copyright Slip.Net - All Rights Reserved 1995
# for use with associated packages which are Shareware - please register!

# Following is for US Robotics 28.8's - you init string may be different
#$minit = "at&h1&r2&k3"

# This init string should work for everyone
$minit = "at&c1&d2"

# This is your Dialling Prefix (ie. "9" if you are in an office)
$prefix    = ""

# following are modem numbers to be dialed for access to your account:
$dial1 = "12177922777"
$dial2 = "12177922777"

# The installer program for the Slip.Net Internet Launcher added these two lines:
$username = ""
$password = ""



# Do not change the pppprefix
$pppprefix = "S"

# ---------------------------------- LOGIN PROCESS ---------------------------
# You shouldn't have to modify anything below this line
# This script is very complicated. Slip.Net Technical support will not assist
# you if you modify this script. If you have enhancements, please mail them to
# [e-mail] for integration with our standard package
%time  = 0
%time2 = 0
%time3 = 0
%maxtry   = 0
%busy     = 0
%cnct  = 0
%login    = 0                     # not logged in
%estab    = 0                     # session not established

#
# initialize modem
#
output atz\n
input 10 OK\n
#
# set modem to indicate DCD
#
output at&c1&d2\n
input 10 OK\n
output ats10=11\n
input 10 OK\n

# now the init string defined at top of this pgm:
output $minit\n
input 10 OK\n

# overly complicated if/until loop since this scripting language doesn't support While

%tries   = 0
%cnct = 0
%testab = 0
%tlogin = 0
%tcnct = 0

if %testab = 0
repeat
# repeat until estab
if %tlogin = 0
repeat
# repeat until login
if %tcnct = 0
repeat
# repeat until cnct
  %tries = %tries + 1
  $result = "Initialize"
  display "Try #:" %tries  \n
  # Retries Expired check
  # Make this number as large as you want
  # hangup just in case we didn't already
#set DTR off
#sleep 1
#set DTR on
  if %tries = 4
    display "VHT ( Very High Traffic)." \7\n
    display "Trying some other time." \n
    display "Aborting." \n
    set DTR off
    sleep 1
    set DTR on
    abort
  end
  # following command removed to support some laptops - add it in only if needed
  # wait 1

  # We're about to dial now:

  output ATDT
  output $prefix
  # wait a sec after we dial the prefix
  if len($prefix) <> 0
    output ","
  end
  if %busy = 0
      output $dial1
  else
      output $dial2
  end
  output \13

  # check for a result code within 10 seconds

  %time = [read 20 $result]
  %time = [read 20 $result]

  # check if timed out
  # this could be modem failure , or service
  # took more than a minute to respond etc.
  if %time=0 | $result = "RINGING"
    display "Still waiting for a connect"\n
    # wait another 10 seconds just to be sure its not going to answer
    %time2 = [read 10 $result]
    %time2 = [read 10 $result]
    if %time2 = 0 | $result = "RINGING"
        display "Still waiting for a connect"\n
        %time3 = [read 10 $result]
        %time3 = [read 10 $result]

        if %time3 = 0 | $result = "RINGING"
            display \n
            display "ERROR Timed-out. Hanging up line to try again." \n
            set DTR off
            sleep 1
            set DTR on
            %cnct = 0
            %busy = 1
            #abort
        end
    end
  else
    %time2 = 0

    # seems like we're online so drop thru:
  end

  # Check if Modem Returns BUSY
  # does not work with $result = "CONNECT" ??
  # but since usually the only two conditions
  # are busy and not busy , this will work
  # NO CARRIER for example will pass through but
  # will be traped in the  wait 30 dcd command below
  if $result = "BUSY"
    # display "This number is Busy." \n
    %cnct = 0
    %busy = 1
    display "Redialling now" \n
  else
    if $result <> "NO CARRIER"
    # Since connects look different depending on the modem:
    display " Assuming that we're going to Connect."\n
    %cnct = 1
    end
    # connect assumed successful
  end
until %cnct = 1
end   # if %tcnct = 0
%tcnct = 1

# now we are connected.
#
#  wait till it's safe to send because some modem's hang up
#  if you transmit during the connection phase
#
wait 10 dcd
#
#  wait for the username prompt
#
%login = [input 15 login]
if %login = 0
   # wait another 10 seconds just to be sure
   %login = [read 10 $result]
   if %login = 0
   display \n
   display "ERROR: login not received from Host Timed-out. Hangup line." \n
   set DTR off
   sleep 1
   set DTR on
   # force it to hangup and dial again:
   %tcnct = 0
   end
else
%login = 1
end
until %login = 1
end    # if %login = 1
%tlogin = 1

#

# Edit the username at the top of this file to be your PPP login id assigned
# to you by slip.net
# (Be sure to put a 'S' first!)
# ***ENTER USERNAME AT THE TOP OF THIS FILE - NOT HERE
output $pppprefix
output $username\n
#
# and the password
#
input 30 Password:
#
# edit your_password to be your slip login password.
# ***ENTER PASSWORD AT THE TOP OF THIS FILE - NOT HERE
output $password\n
#
# we shoul now be logged in
#
# wait for the address string
#
input 30 to
#
# parse address
#
%estab = [address 10]
#
# we are now connected, logged in and in slip mode.
#
 if %estab = 0
   # wait another 20 seconds just to be sure
   %estab = [address 10]
   if %estab = 0
   display \n
   display "ERROR: PPP address not provided - be sure to log into a PPP account. Hanging up line." \n
   display "you may have the wrong userid or password - please call technical support "\n
   display "if you need more help at 1-415-281-3177"\n
   set DTR off
   sleep 1
   set DTR on
   # force it to hangup and dial again:
   %tcnct = 0
   %tlogin = 0
   end
 else
   %estab = 1
 end
until %estab = 1
end  # if test to see if estab = 1
%testab = 1
# We'll never get here unless we actually established a PPP session:
display \n
display Connected.  Your IP address is \i.\n
online