12 "%s"\n\nA port number for the service name above could not be found. It might be misspelled or it does not exist in the services system file. You may also enter a numeric port number.
13 "%s"\n\nReally remove this rule?
14 Inbound
15 Outbound
16 An unknown
17 port %d
18 Not in the Permitted Site List
19 Default Inbound Loopback
20 Default Inbound Bootp
21 User-blocked site
22 Default Outbound Loopback
23 Inbound %s service: %s
24 Outbound %s service: %s
25 Remote service:
26 Local service:
27 Default Outbound Bootp
28 Remote address:
29 Local address:
30 outbound
31 inbound
32 You have changes that have not been applied.\nDo you want to apply these now?
33 Module
34 Version
35 Size
36 Application
37 Service
38 Address
39 Permit
40 Block
41 Inbound
42 Outbound
43 Either
44 TCP or UDP
46 No rules currently exist for the firewall to test.
47 First address:
48 Last address:
49 Address:
50 Subnet mask:
51 Address or host name:
52 "%s"\n\nThis is not a valid address.
53 "%s"\n\nThis name could not be resolved to a valid IP address.
54 Time Active
55 The default web browser could not be found in the registry.\nPlease load the following page yourself:\n\n%s
56 The end time must come after the start time.
57 All day
58 None
59 This rule will %1 %2 %3 communication.\n\nRule summary:
60 Inbound %s address: %s
61 Outbound %s address: %s
62 Any application
63 Any network service
64 Any address
65 The RuleAssisant Wizard could not be created due to the following system error:\n\n%s
66 Choose whether this rule will apply only to "%1" or will apply to any application performing %2 %3 network communication specified by the rule.
67 Current rule definition: permit "%1" to perform %2 %3 communication.\n\nChoose whether this rule permits network communication using only the "%4" %5 service or permits communication using any service. A network service defines what type of communication can take place with another computer. For example, Web browsing (http) or e-mail (smtp, pop).
68 Current rule definition: permit "%1" to perform %2 %3 communication using "%4".\n\nChoose whether this rule permits communication only to the network address "%5" or permits communication to any network address. A network address defines another computer or web site on the network.
69 Rule number %d
70 Network communication is blocked by the following rule:\n "%s".
71 Network communication is permitted by the following rule:\n "%s".
72 High security block
73 An application must be specified.
74 Permitted
75 Blocked
76 ( A local service and address must be specified. )
77 ( A remote service and address must be specified. )
78 This wizard will help you create a firewall rule that %1 %2 %3 network communication.
79 Never
80 There are rule edits that have not been applied. The firewall test will only be valid for rules that have been applied.\n\nWould you like to apply your changes now?
81 Port to monitor:
82 Enter a number between %u and %u.
83 Choose whether this rule will apply only to "%1" ICMP network communication or will apply to any type performing %2 %3 network communication specified by the rule.
84 permit
85 block
86 permits
87 blocks
88 The rule blocks communication with:
89 The rule permits communication with:
92 Create Permit Rule
93 Create Block Rule
94 Current rule definition: block "%1" from performing %2 %3 communication.\n\nChoose whether this rule blocks network communication using only the "%4" service or blocks communication using any service. A network service defines what type of communication can take place with another computer. For example, Web browsing (http) or e-mail (smtp, pop).
96 Current rule definition: block "%1" from performing %2 %3 communication using "%4".\n\nChoose whether this rule blocks communication only to the network address "%5" or blocks communication to any network address. A network address defines another computer or web site on the network.
98 local
99 remote
100 Default Inbound DNS
102 Default Outbound DNS
106 Default Inbound NetBIOS
109 Default Outbound NetBIOS
111 Current rule definition: block "%1" messages when performing communication using "%2".\n\nChoose whether this rule blocks communication only to the network address "%3" or blocks communication to any network address. A network address defines another computer or web site on the network.
114 Current rule definition: permit "%1" messages when performing communication using "%2".\n\nChoose whether this rule permits communication only to the network address "%3" or permits communication to any network address. A network address defines another computer or web site on the network.
119 First port number:
120 Service name or port:
121 Port %d to %d
122 Remove the selected rules?
127 Ad Blocking
128 Privacy
129 Active Content
133 Reply
147 Logging
148 Really delete this service list item?
149 An error occurred while reading the Registry.\nDisplayed data may be invalid.
150 An error occurred while updating the Registry.\nSome data may not be properly updated.
153 Default Block Back Orifice 2000
154 Default Block NetBus
157 Action
159 HTML string
161 Add new HTML string
163 all selected HTML strings
165 Are you sure you want to delete
167 %s will alert you with a Rule Assistant.
169 %s will use rules from
170 You must Apply or Cancel changes in the\nOptions dialog before proceeding.
171 The name you entered contains invalid characters.\nSite names can only include alpha-numeric characters, periods, hyphens, and underscores.
172 &Use these rules for
174 The %s filter is not enabled.
176 (Defaults) block list also applies.
177 Ignore
179 Type
181 Inbound/Outbound
183 Default Outbound ICMP
185 Default Inbound ICMP
194 %s - Firewall Rule Assistant
195 Arial
196 ALERT
197 an unknown application
198 %s on %s port (%d)
199 The Rule Assistant will help you set up a rule for future Internet access from %s. If Auto Configure is available, it is recommended that you use that option. However, you may set up a rule to permit or block Internet access from %s in the future by choosing that option below.
200 Any Type
202 Rule Name: %s\n
203 Application: %s\n
204 Direction: %s\n
205 Protocol: %s\n
206 Remote Address: %s\n
207 Remote Port: %s\n
208 Local Port: %s\n
209 Action: %s\n
210 Rule Category: %s\n
211 \n---------------------------------------\n\n
212 %s port %d
213 monitor
214 ignore
216 Unknown
217 About %s
218 %s on port %d
219 Trial has expired.
220 Trial expires in %d day.
221 Trial expires in %d days.
222 Confirm password does not match new password.
223 http://www.symantec.com
224 %s Advanced Options
225 Not Available
226 Remote &service:
227 Local &service:
228 ICMP &Type:
229 Remote a&ddress:
230 Local a&ddress:
231 (Recommended)
232 this unknown application
233 an unknown application
234 the unknown application
235 Error (%x) while loading URL filter
236 Error (%x) while loading URL block list
237 Site is uncategorized
238 Java Applet
240 ActiveX Control
242 Block Inbound ICMP Echo Request
246 Protects your computer from network-based intruders.
247 Executables (*.exe *.dll):*.exe;*.dll:
248 Add Application From File System
249 Add Firewall Rule
250 Modify Firewall Rule
251 Could not configure firewall system with new options.
252 Time
253 Date
255 You must enter a valid site name.
259 (Defaults)
260 Changes to this setting will not take effect until you restart your computer.
261 ICMP Type:
1000 Allow all script to execute
1001 Block script popups only
1002 Block all script
1003 Use default script behavior
1004 Allow Java applets to execute
1005 Block Java applets
1006 Use default Java applet behavior
1007 Allow ActiveX controls to execute
1008 Block ActiveX controls
1009 Use default ActiveX behavior
1010 Allow animations to repeat
1011 Block animations repeating
1012 Use default animation behavior
1013 Prompt for Java applet behavior
1014 Prompt for ActiveX behavior
1015 Prompt
5000 Echo Reply
5001 Destination Unreachable
5002 Source Quench
5003 Redirect
5004 Echo Request
5005 Router Advertisement
5006 Router Solicitation
5007 Time Exceeded for a Datagram
5008 Parameter Problem on a Datagram
5009 Timestamp Request
5010 Timestamp Reply
5011 Information Request
5012 Information Replay
5013 Address-Mask Request
5014 Address-Mask Reply
5015 Java Script
5016 : Any Type
5017 ICMP: Any Type
5018 This change will go into effect the next time you reboot your computer.
5021 Block access to secure sites
5022 not logged in
5026 Only this type: %s
5027 Any type.
5028 Only this service: %s
5029 Any service.
5030 Address: %s
5031 Any address.
5032 %s has detected that an internet/network communication is trying to access your computer.
5033 Before your computer can be accessed, you must tell %s how you would like it to handle this situation.
5034 %s has detected that an internet/network communication is trying to access %s.
5035 ...
5036 (must be supervisor)
5037 <html><head><title>Site Blocked</title></head><body>\n<br><b>%s has blocked access to this restricted site</b><br><hr><br>\n<b>Site: </b>
5038 <br><br><b>Blocked categories: </b>
5039 <br><br>If you think this web site is incorrectly categorized, visit the Symantec <a href="http://www.symantec.com/avcenter/cgi-bin/nisurl.cgi?unblock=
5040 ">Internet Security Center</a> to report it.
5042 Rule Enabled or Disabled
5044 Enabling or disabling rules is intended only for use with the test button. Settings will be reset when the personal firewall is restarted or when security settings are changed.
