r1:[1|SysEx Communication Error][Checksum error|for ^0.][Abort]
ti: Note: %2s Deviation: %3d Cents (Table %s)
ni:%d Entries
ke:[1][This Card/Expansion provides no entry|of this type.][I see.]
nl: (n/a)
np:[3][You cannot select ^0 from this|^1 as it doesn't contain any.|Select a different ^1.][Cancel]
b0:[3][Performance ^0 cannot be requested because the|Control Channel in the System Setup is set to 'OFF'. |To request the desired Performance, set it|to a value between 1 and 16|in the Synth Setup Editor.][Abort|Open Editor…]
b1:[3][Rhythm Set ^0 cannot be requested because the|Control Channel used for changing Performances|is set to '10', thus covering up the Receive Channel|for the Rhythm Part (which is also '10').|To request the desired Rhythm Set,|set the Control Channel to a value other|than '10' in the Synth Setup Editor.][Abort|Open Editor…]
kr:[1][For this parameter change to have any effect,|you have to turn on ^0|in the ^1 first!][No further warnings|OK]
ne:NO EXPANSION
nc:NO CARD
ue: ---
uc: ---
uk:*unknown*
mw:[0][Store ^0 manually on your ^1:|(1) Press button "PATCH", then button "PART SELECT", then "^3", then "WRITE".|(2) Select memory location ^2 with the INC/DEC buttons or use the dial.|(3) Press ENTER twice.][Abort|Skip Entry|OK]
pw:[0][Put your ^1 into BULK RECEIVE mode:|Press and hold the "SHIFT" button while repeatedly|hitting the "16" button until the display reads|"BULK: RECEIVE/--Waiting--".|Now you can send ^0.][Abort|Skip Entry|Send]
wx:[0][Press "EXIT" on your ^1,|when it is done with processing the dump.][OK]
bw:[1|••••• WARNING! Please read! •••••][ |This is a Beta-Release of the upcoming MC-505/JX-305 module.|This means:|• Data in your device might get corrupted|• Library Entries created now might not load in future releases| |Bugreports & suggestions to: SoundDiver Box, user 'Christian Roth'|or Internet: rothc@informatik.tu-muenchen.de][Abort Testing|Go on Testing]
