PC World 1997 November/PCWorld_1997-11_cd.bin/software/programy/komix/DATA.Z/DisplayProject.tcl

Text File | 1997-04-11 | 102.6 KB | 3,269 lines

# import of Forte (V2.0) DisplayProject library into ObjectTeam

OTShRegister::importTool

#-----------------------------------CDM----------------------------------------

foreach name {
 4GLDisplayNode
 4GLUserWindow
 Action
 ActionAdjustArrayField
 ActionAdjustRowCol
 ActionChangeClipboard
 ActionChangeDisplayState
 ActionChangeFieldValue
 ActionChangeFocus
 ActionChangeMenuValue
 ActionCompletePopup
 ActionDropObject
 ActionExitField
 ActionMarkLine
 ActionMarkPoint
 ActionMarkRectangle
 ActionMenuCommand
 ActionMoveField
 ActionNoOperation
 ActionResizeField
 ActionRouteField
 ActionScrollField
 ActionSelectionChange
 ActionSetProperty1Int
 ActionSetProperty2Int
 ActionSetProperty4Int
 ActionSetPropertyObject
 ActionSetPropertyString
 ActionShutdown
 ActionStretchField
 ActionTouchField
 ActionTreeFieldOperation
 AlarmDispatchObject
 AlternateInput
 ArrayField
 C_ArrayField
 C_CharacterField
 C_ColorPalette
 C_CompoundField
 C_CompoundGraphic
 C_CompoundMenu
 C_DataField
 C_DialogWindow
 C_DropList
 C_ElasticField
 C_Ellipse
 C_ExtendedFontDescriptor
 C_FieldWidget
 C_Figure
 C_FileSelectionDialog
 C_FillInField
 C_Font
 C_FontDescriptor
 C_Ghost
 C_GhostLine
 C_GhostRectangle
 C_Graphic
 C_GridField
 C_ImageData
 C_ImageEngine
 C_Line
 C_ListField
 C_MatrixField
 C_MenuBar
 C_MenuCommand
 C_MenuGroup
 C_MenuList
 C_MenuSeparator
 C_MenuToggle
 C_MenuWidget
 C_MessageDialog
 C_MultiLineTextEngine
 C_OLEField
 C_OldCompoundGraphic
 C_OldDataField
 C_OutlineField
 C_OutputDevice
 C_PaletteList
 C_Panel
 C_PictureButton
 C_PictureField
 C_PictureGraphic
 C_Point
 C_PolyLine
 C_PopupMenu
 C_PortableFontDescriptor
 C_PrintOptionsDesc
 C_PrintPage
 C_PromptDialog
 C_PushButton
 C_QuestionDialog
 C_RadioList
 C_RangeField
 C_RasterImageData
 C_RasterSnapShot
 C_Rectangle
 C_Route
 C_ScrollBar
 C_ScrollList
 C_Shape
 C_SimpleField
 C_SimpleMenu
 C_SingleLineTextEngine
 C_SnapShot
 C_StaticField
 C_StaticMenu
 C_Submenu
 C_SystemFontDescriptor
 C_TextEditField
 C_TextEngine
 C_TextField
 C_TextGraphic
 C_ToggleField
 C_TreeField
 C_VariableField
 C_VariableMenu
 C_Viewport
 C_Widget
 C_Window
 C_WindowSystem
 Capsule
 Capture
 CharacterField
 ClassPropertyObject
 ColorPalette
 ColumnDescriptor
 CompoundField
 CompoundGraphic
 CompoundMenu
 DataField
 DataPoint
 DescriptorObject
 DialogWindow
 DisplayNode
 DropCapsule
 DropList
 EditScope
 ElasticField
 Ellipse
 EmptyPage
 Event
 ExtendedFontDescriptor
 FieldWidget
 Figure
 FileObject
 FileSelectionDialog
 FillInField
 Font
 FontDescriptor
 Ghost
 GhostLine
 GhostRectangle
 Graphic
 GridField
 Image
 ImageEngine
 Line
 ListField
 MatrixField
 MenuBar
 MenuCommand
 MenuGroup
 MenuList
 MenuObject
 MenuSeparator
 MenuToggle
 MenuWidget
 MessageDialog
 MultiLineTextEngine
 OLEField
 OldCompoundGraphic
 OldDataField
 OleDLL
 OutlineColumnDesc
 OutlineField
 OutputDevice
 PaletteList
 Panel
 PictureButton
 PictureField
 PictureGraphic
 Playback
 PlaybackAlarm
 Point
 PolyLine
 PopupMenu
 PortableFontDescriptor
 PrintDocument
 PrintOptionsDesc
 PrintPage
 PromptDialog
 PushButton
 QuestionDialog
 RadioList
 RangeField
 RasterImageData
 RasterSnapShot
 Recorder
 Rectangle
 RepositoryObject
 Route
 RowColDescriptor
 ScopeObject
 ScrollBar
 ScrollList
 Shape
 SimpleField
 SimpleMenu
 SingleLineTextEngine
 SnapShot
 SourceObject
 StaticField
 StaticMenu
 Submenu
 SystemFontDescriptor
 TextEditField
 TextEngine
 TextEngineRecorder
 TextField
 TextGraphic
 ToggleField
 TreeField
 UserWindow
 VariableField
 VariableMenu
 Viewport
 VirtualTextCN
 WSdog
 Widget
 Win3ActivityCollector
 Window
 WindowManagerHints
 WindowSystem
 WinsockActivityCollector
 XAlarm } {
    set msg ""
    if {[catch {
    set diag ""
    set row ""
    set diag [CDM new $name "DisplayProject" "" "" "" "" "" 1 1]
    set row [$diag addRow method 0.0]
    $row setLabel "name_type" "\$create"
    $diag save
    } msg]} {
    puts stderr "\nAn error occurred while importing Class '$name'"
    puts stderr $msg
    }
}


#-----------------------------------CAD----------------------------------------


set msg ""
if {[catch {
set diag ""
set diag [CAD new ActivityCollectorTree "DisplayProject" "" "" "" "" "" 1 1]

set node1309 [$diag addNode cad_class 0.0 200.0 191.0 36.0]
$node1309 setLabel "name" "WinsockActivityCollector"
$node1309 setProp "is_folded" "1"
$node1309 setScope "name" "cl" "scopePhase"

set node1311 [$diag addNode cad_class 12.5 100.0 166.0 36.0]
$node1311 setLabel "name" "Win3ActivityCollector"
$node1311 setProp "is_folded" "1"
$node1311 setScope "name" "cl" "scopePhase"

set node1312 [$diag addNode cad_class 30.0 0.0 131.0 36.0]
$node1312 setLabel "name" "ActivityCollector"
$node1312 setProp "is_folded" "1"
$node1312 setScope "name" "cl" "scopePhase"

set node1308 [$diag addRake generalization $node1311 $node1309 95.5 136.0 95.5 200.0 168.0]

set conn1313 [$node1308 getInConn]
set segm1314 [$conn1313 getFirstSegm]

set conn1315 [$node1308 getFirstOutConn]
set segm1316 [$conn1315 getFirstSegm]

set node1310 [$diag addRake generalization $node1312 $node1311 95.5 36.0 95.5 100.0 68.0]

set conn1317 [$node1310 getInConn]
set segm1318 [$conn1317 getFirstSegm]

set conn1319 [$node1310 getFirstOutConn]
set segm1320 [$conn1319 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new dpAlarmTree "DisplayProject" "" "" "" "" "" 1 1]

set node1257 [$diag addNode cad_class 152.0 100.0 120.0 36.0]
$node1257 setLabel "name" "PlaybackAlarm"
$node1257 setProp "is_folded" "1"
$node1257 setScope "name" "cl" "scopePhase"

set node1259 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node1259 setLabel "name" "XAlarm"
$node1259 setProp "is_folded" "1"
$node1259 setScope "name" "cl" "scopePhase"

set node1260 [$diag addNode cad_class 76.0 0.0 120.0 36.0]
$node1260 setLabel "name" "Alarm"
$node1260 setProp "is_folded" "1"
$node1260 setScope "name" "cl" "scopePhase"

set node1258 [$diag addRake generalization $node1260 $node1257 136.0 36.0 212.0 100.0 68.0]

set conn1261 [$node1258 getInConn]
set segm1262 [$conn1261 getFirstSegm]

set conn1263 [$node1258 getFirstOutConn]
set segm1264 [$conn1263 getFirstSegm]

set conn1265 [$diag addConn generalization_conn $node1258 $node1259 60.0 68.0 60.0 100.0]
set segm1266 [$conn1265 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_ColorPaletteTree "DisplayProject" "" "" "" "" "" 1 1]

set node441 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node441 setLabel "name" "ColorPalette"
$node441 setProp "is_folded" "1"
$node441 setScope "name" "cl" "scopePhase"

set node442 [$diag addNode cad_class 0.0 0.0 121.0 36.0]
$node442 setLabel "name" "C_ColorPalette"
$node442 setProp "is_folded" "1"
$node442 setScope "name" "cl" "scopePhase"

set node440 [$diag addRake generalization $node442 $node441 60.5 36.0 60.0 100.0 68.0]

set conn443 [$node440 getInConn]
set segm444 [$conn443 getFirstSegm]

set conn445 [$node440 getFirstOutConn]
set segm446 [$conn445 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_ExtendedFontDescriptorTree "DisplayProject" "" "" "" "" "" 1 1]

set node294 [$diag addNode cad_class 0.0 100.0 185.0 36.0]
$node294 setLabel "name" "ExtendedFontDescriptor"
$node294 setProp "is_folded" "1"
$node294 setScope "name" "cl" "scopePhase"

set node295 [$diag addNode cad_class 0.0 0.0 204.0 36.0]
$node295 setLabel "name" "C_ExtendedFontDescriptor"
$node295 setProp "is_folded" "1"
$node295 setScope "name" "cl" "scopePhase"

set node293 [$diag addRake generalization $node295 $node294 102.0 36.0 92.5 100.0 68.0]

set conn296 [$node293 getInConn]
set segm297 [$conn296 getFirstSegm]

set conn298 [$node293 getFirstOutConn]
set segm299 [$conn298 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_ImageDataTree "DisplayProject" "" "" "" "" "" 1 1]

set node243 [$diag addNode cad_class 0.0 300.0 134.0 36.0]
$node243 setLabel "name" "RasterImageData"
$node243 setProp "is_folded" "1"
$node243 setScope "name" "cl" "scopePhase"

set node245 [$diag addNode cad_class 0.0 200.0 153.0 36.0]
$node245 setLabel "name" "C_RasterImageData"
$node245 setProp "is_folded" "1"
$node245 setScope "name" "cl" "scopePhase"

set node247 [$diag addNode cad_class 16.5 100.0 120.0 36.0]
$node247 setLabel "name" "ImageData"
$node247 setProp "is_folded" "1"
$node247 setScope "name" "cl" "scopePhase"

set node248 [$diag addNode cad_class 16.5 0.0 120.0 36.0]
$node248 setLabel "name" "C_ImageData"
$node248 setProp "is_folded" "1"
$node248 setScope "name" "cl" "scopePhase"

set node242 [$diag addRake generalization $node245 $node243 76.5 236.0 67.0 300.0 268.0]

set conn249 [$node242 getInConn]
set segm250 [$conn249 getFirstSegm]

set conn251 [$node242 getFirstOutConn]
set segm252 [$conn251 getFirstSegm]

set node244 [$diag addRake generalization $node247 $node245 76.5 136.0 76.5 200.0 168.0]

set conn253 [$node244 getInConn]
set segm254 [$conn253 getFirstSegm]

set conn255 [$node244 getFirstOutConn]
set segm256 [$conn255 getFirstSegm]

set node246 [$diag addRake generalization $node248 $node247 76.5 36.0 76.5 100.0 68.0]

set conn257 [$node246 getInConn]
set segm258 [$conn257 getFirstSegm]

set conn259 [$node246 getFirstOutConn]
set segm260 [$conn259 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_ImageEngineTree "DisplayProject" "" "" "" "" "" 1 1]

set node736 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node736 setLabel "name" "ImageEngine"
$node736 setProp "is_folded" "1"
$node736 setScope "name" "cl" "scopePhase"

set node737 [$diag addNode cad_class 0.0 0.0 123.0 36.0]
$node737 setLabel "name" "C_ImageEngine"
$node737 setProp "is_folded" "1"
$node737 setScope "name" "cl" "scopePhase"

set node735 [$diag addRake generalization $node737 $node736 61.5 36.0 60.0 100.0 68.0]

set conn738 [$node735 getInConn]
set segm739 [$conn738 getFirstSegm]

set conn740 [$node735 getFirstOutConn]
set segm741 [$conn740 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_OLEFieldTree "DisplayProject" "" "" "" "" "" 1 1]

set node743 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node743 setLabel "name" "OLEField"
$node743 setProp "is_folded" "1"
$node743 setScope "name" "cl" "scopePhase"

set node744 [$diag addNode cad_class 0.0 0.0 120.0 36.0]
$node744 setLabel "name" "C_OLEField"
$node744 setProp "is_folded" "1"
$node744 setScope "name" "cl" "scopePhase"

set node742 [$diag addRake generalization $node744 $node743 60.0 36.0 60.0 100.0 68.0]

set conn745 [$node742 getInConn]
set segm746 [$conn745 getFirstSegm]

set conn747 [$node742 getFirstOutConn]
set segm748 [$conn747 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_OutputDeviceTree "DisplayProject" "" "" "" "" "" 1 1]

set node753 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node753 setLabel "name" "OutputDevice"
$node753 setProp "is_folded" "1"
$node753 setScope "name" "cl" "scopePhase"

set node754 [$diag addNode cad_class 0.0 0.0 130.0 36.0]
$node754 setLabel "name" "C_OutputDevice"
$node754 setProp "is_folded" "1"
$node754 setScope "name" "cl" "scopePhase"

set node752 [$diag addRake generalization $node754 $node753 65.0 36.0 60.0 100.0 68.0]

set conn755 [$node752 getInConn]
set segm756 [$conn755 getFirstSegm]

set conn757 [$node752 getFirstOutConn]
set segm758 [$conn757 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_PortableFontDescriptorTree "DisplayProject" "" "" "" "" "" 1 1]

set node221 [$diag addNode cad_class 0.0 100.0 180.0 36.0]
$node221 setLabel "name" "PortableFontDescriptor"
$node221 setProp "is_folded" "1"
$node221 setScope "name" "cl" "scopePhase"

set node222 [$diag addNode cad_class 0.0 0.0 199.0 36.0]
$node222 setLabel "name" "C_PortableFontDescriptor"
$node222 setProp "is_folded" "1"
$node222 setScope "name" "cl" "scopePhase"

set node220 [$diag addRake generalization $node222 $node221 99.5 36.0 90.0 100.0 68.0]

set conn223 [$node220 getInConn]
set segm224 [$conn223 getFirstSegm]

set conn225 [$node220 getFirstOutConn]
set segm226 [$conn225 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_PrintOptionsDescTree "DisplayProject" "" "" "" "" "" 1 1]

set node761 [$diag addNode cad_class 0.0 100.0 140.0 36.0]
$node761 setLabel "name" "PrintOptionsDesc"
$node761 setProp "is_folded" "1"
$node761 setScope "name" "cl" "scopePhase"

set node762 [$diag addNode cad_class 0.0 0.0 159.0 36.0]
$node762 setLabel "name" "C_PrintOptionsDesc"
$node762 setProp "is_folded" "1"
$node762 setScope "name" "cl" "scopePhase"

set node760 [$diag addRake generalization $node762 $node761 79.5 36.0 70.0 100.0 68.0]

set conn763 [$node760 getInConn]
set segm764 [$conn763 getFirstSegm]

set conn765 [$node760 getFirstOutConn]
set segm766 [$conn765 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_SimpleFieldTree "DisplayProject" "" "" "" "" "" 1 1]

set node1042 [$diag addNode cad_class 1984.0 200.0 120.0 36.0]
$node1042 setLabel "name" "C_OLEField"
$node1042 setProp "is_folded" "1"
$node1042 setScope "name" "cl" "scopePhase"

set node1044 [$diag addNode cad_class 1832.0 500.0 120.0 36.0]
$node1044 setLabel "name" "OutlineField"
$node1044 setProp "is_folded" "1"
$node1044 setScope "name" "cl" "scopePhase"

set node1046 [$diag addNode cad_class 1832.0 400.0 120.0 36.0]
$node1046 setLabel "name" "C_OutlineField"
$node1046 setProp "is_folded" "1"
$node1046 setScope "name" "cl" "scopePhase"

set node1048 [$diag addNode cad_class 1832.0 300.0 120.0 36.0]
$node1048 setLabel "name" "TreeField"
$node1048 setProp "is_folded" "1"
$node1048 setScope "name" "cl" "scopePhase"

set node1049 [$diag addNode cad_class 1832.0 200.0 120.0 36.0]
$node1049 setLabel "name" "C_TreeField"
$node1049 setProp "is_folded" "1"
$node1049 setScope "name" "cl" "scopePhase"

set node1051 [$diag addNode cad_class 1680.0 500.0 120.0 36.0]
$node1051 setLabel "name" "PaletteList"
$node1051 setProp "is_folded" "1"
$node1051 setScope "name" "cl" "scopePhase"

set node1052 [$diag addNode cad_class 1680.0 400.0 120.0 36.0]
$node1052 setLabel "name" "C_PaletteList"
$node1052 setProp "is_folded" "1"
$node1052 setScope "name" "cl" "scopePhase"

set node1054 [$diag addNode cad_class 1528.0 500.0 120.0 36.0]
$node1054 setLabel "name" "DropList"
$node1054 setProp "is_folded" "1"
$node1054 setScope "name" "cl" "scopePhase"

set node1055 [$diag addNode cad_class 1528.0 400.0 120.0 36.0]
$node1055 setLabel "name" "C_DropList"
$node1055 setProp "is_folded" "1"
$node1055 setScope "name" "cl" "scopePhase"

set node1057 [$diag addNode cad_class 1376.0 500.0 120.0 36.0]
$node1057 setLabel "name" "RadioList"
$node1057 setProp "is_folded" "1"
$node1057 setScope "name" "cl" "scopePhase"

set node1058 [$diag addNode cad_class 1376.0 400.0 120.0 36.0]
$node1058 setLabel "name" "C_RadioList"
$node1058 setProp "is_folded" "1"
$node1058 setScope "name" "cl" "scopePhase"

set node1060 [$diag addNode cad_class 1224.0 500.0 120.0 36.0]
$node1060 setLabel "name" "ScrollList"
$node1060 setProp "is_folded" "1"
$node1060 setScope "name" "cl" "scopePhase"

set node1062 [$diag addNode cad_class 1224.0 400.0 120.0 36.0]
$node1062 setLabel "name" "C_ScrollList"
$node1062 setProp "is_folded" "1"
$node1062 setScope "name" "cl" "scopePhase"

set node1064 [$diag addNode cad_class 1452.0 300.0 120.0 36.0]
$node1064 setLabel "name" "ListField"
$node1064 setProp "is_folded" "1"
$node1064 setScope "name" "cl" "scopePhase"

set node1065 [$diag addNode cad_class 1452.0 200.0 120.0 36.0]
$node1065 setLabel "name" "C_ListField"
$node1065 setProp "is_folded" "1"
$node1065 setScope "name" "cl" "scopePhase"

set node1067 [$diag addNode cad_class 1072.0 500.0 120.0 36.0]
$node1067 setLabel "name" "ScrollBar"
$node1067 setProp "is_folded" "1"
$node1067 setScope "name" "cl" "scopePhase"

set node1069 [$diag addNode cad_class 1072.0 400.0 120.0 36.0]
$node1069 setLabel "name" "C_ScrollBar"
$node1069 setProp "is_folded" "1"
$node1069 setScope "name" "cl" "scopePhase"

set node1071 [$diag addNode cad_class 1072.0 300.0 120.0 36.0]
$node1071 setLabel "name" "RangeField"
$node1071 setProp "is_folded" "1"
$node1071 setScope "name" "cl" "scopePhase"

set node1072 [$diag addNode cad_class 1072.0 200.0 120.0 36.0]
$node1072 setLabel "name" "C_RangeField"
$node1072 setProp "is_folded" "1"
$node1072 setScope "name" "cl" "scopePhase"

set node1074 [$diag addNode cad_class 920.0 300.0 120.0 36.0]
$node1074 setLabel "name" "ToggleField"
$node1074 setProp "is_folded" "1"
$node1074 setScope "name" "cl" "scopePhase"

set node1075 [$diag addNode cad_class 920.0 200.0 120.0 36.0]
$node1075 setLabel "name" "C_ToggleField"
$node1075 setProp "is_folded" "1"
$node1075 setScope "name" "cl" "scopePhase"

set node1077 [$diag addNode cad_class 768.0 300.0 120.0 36.0]
$node1077 setLabel "name" "PictureField"
$node1077 setProp "is_folded" "1"
$node1077 setScope "name" "cl" "scopePhase"

set node1078 [$diag addNode cad_class 768.0 200.0 120.0 36.0]
$node1078 setLabel "name" "C_PictureField"
$node1078 setProp "is_folded" "1"
$node1078 setScope "name" "cl" "scopePhase"

set node1080 [$diag addNode cad_class 613.0 500.0 120.0 36.0]
$node1080 setLabel "name" "TextEditField"
$node1080 setProp "is_folded" "1"
$node1080 setScope "name" "cl" "scopePhase"

set node1081 [$diag addNode cad_class 613.0 400.0 123.0 36.0]
$node1081 setLabel "name" "C_TextEditField"
$node1081 setProp "is_folded" "1"
$node1081 setScope "name" "cl" "scopePhase"

set node1083 [$diag addNode cad_class 461.0 500.0 120.0 36.0]
$node1083 setLabel "name" "FillInField"
$node1083 setProp "is_folded" "1"
$node1083 setScope "name" "cl" "scopePhase"

set node1084 [$diag addNode cad_class 461.0 400.0 120.0 36.0]
$node1084 setLabel "name" "C_FillInField"
$node1084 setProp "is_folded" "1"
$node1084 setScope "name" "cl" "scopePhase"

set node1086 [$diag addNode cad_class 309.0 500.0 120.0 36.0]
$node1086 setLabel "name" "DataField"
$node1086 setProp "is_folded" "1"
$node1086 setScope "name" "cl" "scopePhase"

set node1087 [$diag addNode cad_class 309.0 400.0 120.0 36.0]
$node1087 setLabel "name" "C_DataField"
$node1087 setProp "is_folded" "1"
$node1087 setScope "name" "cl" "scopePhase"

set node1089 [$diag addNode cad_class 157.0 500.0 120.0 36.0]
$node1089 setLabel "name" "TextField"
$node1089 setProp "is_folded" "1"
$node1089 setScope "name" "cl" "scopePhase"

set node1090 [$diag addNode cad_class 157.0 400.0 120.0 36.0]
$node1090 setLabel "name" "C_TextField"
$node1090 setProp "is_folded" "1"
$node1090 setScope "name" "cl" "scopePhase"

set node1092 [$diag addNode cad_class 0.0 500.0 120.0 36.0]
$node1092 setLabel "name" "OldDataField"
$node1092 setProp "is_folded" "1"
$node1092 setScope "name" "cl" "scopePhase"

set node1094 [$diag addNode cad_class 0.0 400.0 125.0 36.0]
$node1094 setLabel "name" "C_OldDataField"
$node1094 setProp "is_folded" "1"
$node1094 setScope "name" "cl" "scopePhase"

set node1096 [$diag addNode cad_class 308.0 300.0 120.0 36.0]
$node1096 setLabel "name" "CharacterField"
$node1096 setProp "is_folded" "1"
$node1096 setScope "name" "cl" "scopePhase"

set node1098 [$diag addNode cad_class 299.5 200.0 137.0 36.0]
$node1098 setLabel "name" "C_CharacterField"
$node1098 setProp "is_folded" "1"
$node1098 setScope "name" "cl" "scopePhase"

set node1100 [$diag addNode cad_class 992.0 100.0 120.0 36.0]
$node1100 setLabel "name" "SimpleField"
$node1100 setProp "is_folded" "1"
$node1100 setScope "name" "cl" "scopePhase"

set node1101 [$diag addNode cad_class 992.0 0.0 120.0 36.0]
$node1101 setLabel "name" "C_SimpleField"
$node1101 setProp "is_folded" "1"
$node1101 setScope "name" "cl" "scopePhase"

set node1043 [$diag addRake generalization $node1046 $node1044 1892.0 436.0 1892.0 500.0 468.0]

set conn1102 [$node1043 getInConn]
set segm1103 [$conn1102 getFirstSegm]

set conn1104 [$node1043 getFirstOutConn]
set segm1105 [$conn1104 getFirstSegm]

set node1045 [$diag addRake generalization $node1048 $node1046 1892.0 336.0 1892.0 400.0 368.0]

set conn1106 [$node1045 getInConn]
set segm1107 [$conn1106 getFirstSegm]

set conn1108 [$node1045 getFirstOutConn]
set segm1109 [$conn1108 getFirstSegm]

set node1047 [$diag addRake generalization $node1049 $node1048 1892.0 236.0 1892.0 300.0 268.0]

set conn1110 [$node1047 getInConn]
set segm1111 [$conn1110 getFirstSegm]

set conn1112 [$node1047 getFirstOutConn]
set segm1113 [$conn1112 getFirstSegm]

set node1050 [$diag addRake generalization $node1052 $node1051 1740.0 436.0 1740.0 500.0 468.0]

set conn1114 [$node1050 getInConn]
set segm1115 [$conn1114 getFirstSegm]

set conn1116 [$node1050 getFirstOutConn]
set segm1117 [$conn1116 getFirstSegm]

set node1053 [$diag addRake generalization $node1055 $node1054 1588.0 436.0 1588.0 500.0 468.0]

set conn1118 [$node1053 getInConn]
set segm1119 [$conn1118 getFirstSegm]

set conn1120 [$node1053 getFirstOutConn]
set segm1121 [$conn1120 getFirstSegm]

set node1056 [$diag addRake generalization $node1058 $node1057 1436.0 436.0 1436.0 500.0 468.0]

set conn1122 [$node1056 getInConn]
set segm1123 [$conn1122 getFirstSegm]

set conn1124 [$node1056 getFirstOutConn]
set segm1125 [$conn1124 getFirstSegm]

set node1059 [$diag addRake generalization $node1062 $node1060 1284.0 436.0 1284.0 500.0 468.0]

set conn1126 [$node1059 getInConn]
set segm1127 [$conn1126 getFirstSegm]

set conn1128 [$node1059 getFirstOutConn]
set segm1129 [$conn1128 getFirstSegm]

set node1061 [$diag addRake generalization $node1064 $node1052 1512.0 336.0 1740.0 400.0 368.0]

set conn1130 [$node1061 getInConn]
set segm1131 [$conn1130 getFirstSegm]

set conn1132 [$node1061 getFirstOutConn]
set segm1133 [$conn1132 getFirstSegm]

set conn1134 [$diag addConn generalization_conn $node1061 $node1055 1588.0 368.0 1588.0 400.0]
set segm1135 [$conn1134 getFirstSegm]

set conn1136 [$diag addConn generalization_conn $node1061 $node1058 1436.0 368.0 1436.0 400.0]
set segm1137 [$conn1136 getFirstSegm]

set conn1138 [$diag addConn generalization_conn $node1061 $node1062 1284.0 368.0 1284.0 400.0]
set segm1139 [$conn1138 getFirstSegm]

set node1063 [$diag addRake generalization $node1065 $node1064 1512.0 236.0 1512.0 300.0 268.0]

set conn1140 [$node1063 getInConn]
set segm1141 [$conn1140 getFirstSegm]

set conn1142 [$node1063 getFirstOutConn]
set segm1143 [$conn1142 getFirstSegm]

set node1066 [$diag addRake generalization $node1069 $node1067 1132.0 436.0 1132.0 500.0 468.0]

set conn1144 [$node1066 getInConn]
set segm1145 [$conn1144 getFirstSegm]

set conn1146 [$node1066 getFirstOutConn]
set segm1147 [$conn1146 getFirstSegm]

set node1068 [$diag addRake generalization $node1071 $node1069 1132.0 336.0 1132.0 400.0 368.0]

set conn1148 [$node1068 getInConn]
set segm1149 [$conn1148 getFirstSegm]

set conn1150 [$node1068 getFirstOutConn]
set segm1151 [$conn1150 getFirstSegm]

set node1070 [$diag addRake generalization $node1072 $node1071 1132.0 236.0 1132.0 300.0 268.0]

set conn1152 [$node1070 getInConn]
set segm1153 [$conn1152 getFirstSegm]

set conn1154 [$node1070 getFirstOutConn]
set segm1155 [$conn1154 getFirstSegm]

set node1073 [$diag addRake generalization $node1075 $node1074 980.0 236.0 980.0 300.0 268.0]

set conn1156 [$node1073 getInConn]
set segm1157 [$conn1156 getFirstSegm]

set conn1158 [$node1073 getFirstOutConn]
set segm1159 [$conn1158 getFirstSegm]

set node1076 [$diag addRake generalization $node1078 $node1077 828.0 236.0 828.0 300.0 268.0]

set conn1160 [$node1076 getInConn]
set segm1161 [$conn1160 getFirstSegm]

set conn1162 [$node1076 getFirstOutConn]
set segm1163 [$conn1162 getFirstSegm]

set node1079 [$diag addRake generalization $node1081 $node1080 674.5 436.0 673.0 500.0 468.0]

set conn1164 [$node1079 getInConn]
set segm1165 [$conn1164 getFirstSegm]

set conn1166 [$node1079 getFirstOutConn]
set segm1167 [$conn1166 getFirstSegm]

set node1082 [$diag addRake generalization $node1084 $node1083 521.0 436.0 521.0 500.0 468.0]

set conn1168 [$node1082 getInConn]
set segm1169 [$conn1168 getFirstSegm]

set conn1170 [$node1082 getFirstOutConn]
set segm1171 [$conn1170 getFirstSegm]

set node1085 [$diag addRake generalization $node1087 $node1086 369.0 436.0 369.0 500.0 468.0]

set conn1172 [$node1085 getInConn]
set segm1173 [$conn1172 getFirstSegm]

set conn1174 [$node1085 getFirstOutConn]
set segm1175 [$conn1174 getFirstSegm]

set node1088 [$diag addRake generalization $node1090 $node1089 217.0 436.0 217.0 500.0 468.0]

set conn1176 [$node1088 getInConn]
set segm1177 [$conn1176 getFirstSegm]

set conn1178 [$node1088 getFirstOutConn]
set segm1179 [$conn1178 getFirstSegm]

set node1091 [$diag addRake generalization $node1094 $node1092 62.5 436.0 60.0 500.0 468.0]

set conn1180 [$node1091 getInConn]
set segm1181 [$conn1180 getFirstSegm]

set conn1182 [$node1091 getFirstOutConn]
set segm1183 [$conn1182 getFirstSegm]

set node1093 [$diag addRake generalization $node1096 $node1081 368.0 336.0 674.5 400.0 368.0]

set conn1184 [$node1093 getInConn]
set segm1185 [$conn1184 getFirstSegm]

set conn1186 [$node1093 getFirstOutConn]
set segm1187 [$conn1186 getFirstSegm]

set conn1188 [$diag addConn generalization_conn $node1093 $node1084 521.0 368.0 521.0 400.0]
set segm1189 [$conn1188 getFirstSegm]

set conn1190 [$diag addConn generalization_conn $node1093 $node1087 369.0 368.0 369.0 400.0]
set segm1191 [$conn1190 getFirstSegm]

set conn1192 [$diag addConn generalization_conn $node1093 $node1090 217.0 368.0 217.0 400.0]
set segm1193 [$conn1192 getFirstSegm]

set conn1194 [$diag addConn generalization_conn $node1093 $node1094 62.5 368.0 62.5 400.0]
set segm1195 [$conn1194 getFirstSegm]

set node1095 [$diag addRake generalization $node1098 $node1096 368.0 236.0 368.0 300.0 268.0]

set conn1196 [$node1095 getInConn]
set segm1197 [$conn1196 getFirstSegm]

set conn1198 [$node1095 getFirstOutConn]
set segm1199 [$conn1198 getFirstSegm]

set node1097 [$diag addRake generalization $node1100 $node1042 1052.0 136.0 2044.0 200.0 168.0]

set conn1200 [$node1097 getInConn]
set segm1201 [$conn1200 getFirstSegm]

set conn1202 [$node1097 getFirstOutConn]
set segm1203 [$conn1202 getFirstSegm]

set conn1204 [$diag addConn generalization_conn $node1097 $node1049 1892.0 168.0 1892.0 200.0]
set segm1205 [$conn1204 getFirstSegm]

set conn1206 [$diag addConn generalization_conn $node1097 $node1065 1512.0 168.0 1512.0 200.0]
set segm1207 [$conn1206 getFirstSegm]

set conn1208 [$diag addConn generalization_conn $node1097 $node1072 1132.0 168.0 1132.0 200.0]
set segm1209 [$conn1208 getFirstSegm]

set conn1210 [$diag addConn generalization_conn $node1097 $node1075 980.0 168.0 980.0 200.0]
set segm1211 [$conn1210 getFirstSegm]

set conn1212 [$diag addConn generalization_conn $node1097 $node1078 828.0 168.0 828.0 200.0]
set segm1213 [$conn1212 getFirstSegm]

set conn1214 [$diag addConn generalization_conn $node1097 $node1098 368.0 168.0 368.0 200.0]
set segm1215 [$conn1214 getFirstSegm]

set node1099 [$diag addRake generalization $node1101 $node1100 1052.0 36.0 1052.0 100.0 68.0]

set conn1216 [$node1099 getInConn]
set segm1217 [$conn1216 getFirstSegm]

set conn1218 [$node1099 getFirstOutConn]
set segm1219 [$conn1218 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_SnapShotTree "DisplayProject" "" "" "" "" "" 1 1]

set node302 [$diag addNode cad_class 0.0 300.0 130.0 36.0]
$node302 setLabel "name" "RasterSnapShot"
$node302 setProp "is_folded" "1"
$node302 setScope "name" "cl" "scopePhase"

set node304 [$diag addNode cad_class 0.0 200.0 149.0 36.0]
$node304 setLabel "name" "C_RasterSnapShot"
$node304 setProp "is_folded" "1"
$node304 setScope "name" "cl" "scopePhase"

set node306 [$diag addNode cad_class 14.5 100.0 120.0 36.0]
$node306 setLabel "name" "SnapShot"
$node306 setProp "is_folded" "1"
$node306 setScope "name" "cl" "scopePhase"

set node307 [$diag addNode cad_class 14.5 0.0 120.0 36.0]
$node307 setLabel "name" "C_SnapShot"
$node307 setProp "is_folded" "1"
$node307 setScope "name" "cl" "scopePhase"

set node301 [$diag addRake generalization $node304 $node302 74.5 236.0 65.0 300.0 268.0]

set conn308 [$node301 getInConn]
set segm309 [$conn308 getFirstSegm]

set conn310 [$node301 getFirstOutConn]
set segm311 [$conn310 getFirstSegm]

set node303 [$diag addRake generalization $node306 $node304 74.5 136.0 74.5 200.0 168.0]

set conn312 [$node303 getInConn]
set segm313 [$conn312 getFirstSegm]

set conn314 [$node303 getFirstOutConn]
set segm315 [$conn314 getFirstSegm]

set node305 [$diag addRake generalization $node307 $node306 74.5 36.0 74.5 100.0 68.0]

set conn316 [$node305 getInConn]
set segm317 [$conn316 getFirstSegm]

set conn318 [$node305 getFirstOutConn]
set segm319 [$conn318 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_StaticFieldTree "DisplayProject" "" "" "" "" "" 1 1]

set node873 [$diag addNode cad_class 1235.0 300.0 120.0 36.0]
$node873 setLabel "name" "PictureButton"
$node873 setProp "is_folded" "1"
$node873 setScope "name" "cl" "scopePhase"

set node874 [$diag addNode cad_class 1235.0 200.0 131.0 36.0]
$node874 setLabel "name" "C_PictureButton"
$node874 setProp "is_folded" "1"
$node874 setScope "name" "cl" "scopePhase"

set node876 [$diag addNode cad_class 1064.0 500.0 120.0 36.0]
$node876 setLabel "name" "PictureGraphic"
$node876 setProp "is_folded" "1"
$node876 setScope "name" "cl" "scopePhase"

set node877 [$diag addNode cad_class 1064.0 400.0 139.0 36.0]
$node877 setLabel "name" "C_PictureGraphic"
$node877 setProp "is_folded" "1"
$node877 setScope "name" "cl" "scopePhase"

set node879 [$diag addNode cad_class 912.0 500.0 120.0 36.0]
$node879 setLabel "name" "TextGraphic"
$node879 setProp "is_folded" "1"
$node879 setScope "name" "cl" "scopePhase"

set node880 [$diag addNode cad_class 912.0 400.0 120.0 36.0]
$node880 setLabel "name" "C_TextGraphic"
$node880 setProp "is_folded" "1"
$node880 setScope "name" "cl" "scopePhase"

set node882 [$diag addNode cad_class 760.0 700.0 120.0 36.0]
$node882 setLabel "name" "Point"
$node882 setProp "is_folded" "1"
$node882 setScope "name" "cl" "scopePhase"

set node883 [$diag addNode cad_class 760.0 600.0 120.0 36.0]
$node883 setLabel "name" "C_Point"
$node883 setProp "is_folded" "1"
$node883 setScope "name" "cl" "scopePhase"

set node885 [$diag addNode cad_class 608.0 900.0 120.0 36.0]
$node885 setLabel "name" "PolyLine"
$node885 setProp "is_folded" "1"
$node885 setScope "name" "cl" "scopePhase"

set node886 [$diag addNode cad_class 608.0 800.0 120.0 36.0]
$node886 setLabel "name" "C_PolyLine"
$node886 setProp "is_folded" "1"
$node886 setScope "name" "cl" "scopePhase"

set node888 [$diag addNode cad_class 456.0 900.0 120.0 36.0]
$node888 setLabel "name" "Line"
$node888 setProp "is_folded" "1"
$node888 setScope "name" "cl" "scopePhase"

set node890 [$diag addNode cad_class 456.0 800.0 120.0 36.0]
$node890 setLabel "name" "C_Line"
$node890 setProp "is_folded" "1"
$node890 setScope "name" "cl" "scopePhase"

set node892 [$diag addNode cad_class 532.0 700.0 120.0 36.0]
$node892 setLabel "name" "Route"
$node892 setProp "is_folded" "1"
$node892 setScope "name" "cl" "scopePhase"

set node893 [$diag addNode cad_class 532.0 600.0 120.0 36.0]
$node893 setLabel "name" "C_Route"
$node893 setProp "is_folded" "1"
$node893 setScope "name" "cl" "scopePhase"

set node895 [$diag addNode cad_class 304.0 900.0 120.0 36.0]
$node895 setLabel "name" "Ellipse"
$node895 setProp "is_folded" "1"
$node895 setScope "name" "cl" "scopePhase"

set node896 [$diag addNode cad_class 304.0 800.0 120.0 36.0]
$node896 setLabel "name" "C_Ellipse"
$node896 setProp "is_folded" "1"
$node896 setScope "name" "cl" "scopePhase"

set node898 [$diag addNode cad_class 152.0 900.0 120.0 36.0]
$node898 setLabel "name" "Rectangle"
$node898 setProp "is_folded" "1"
$node898 setScope "name" "cl" "scopePhase"

set node900 [$diag addNode cad_class 152.0 800.0 120.0 36.0]
$node900 setLabel "name" "C_Rectangle"
$node900 setProp "is_folded" "1"
$node900 setScope "name" "cl" "scopePhase"

set node902 [$diag addNode cad_class 228.0 700.0 120.0 36.0]
$node902 setLabel "name" "Shape"
$node902 setProp "is_folded" "1"
$node902 setScope "name" "cl" "scopePhase"

set node904 [$diag addNode cad_class 228.0 600.0 120.0 36.0]
$node904 setLabel "name" "C_Shape"
$node904 setProp "is_folded" "1"
$node904 setScope "name" "cl" "scopePhase"

set node906 [$diag addNode cad_class 456.0 500.0 120.0 36.0]
$node906 setLabel "name" "Figure"
$node906 setProp "is_folded" "1"
$node906 setScope "name" "cl" "scopePhase"

set node908 [$diag addNode cad_class 456.0 400.0 120.0 36.0]
$node908 setLabel "name" "C_Figure"
$node908 setProp "is_folded" "1"
$node908 setScope "name" "cl" "scopePhase"

set node910 [$diag addNode cad_class 617.5 300.0 120.0 36.0]
$node910 setLabel "name" "Graphic"
$node910 setProp "is_folded" "1"
$node910 setScope "name" "cl" "scopePhase"

set node911 [$diag addNode cad_class 617.5 200.0 120.0 36.0]
$node911 setLabel "name" "C_Graphic"
$node911 setProp "is_folded" "1"
$node911 setScope "name" "cl" "scopePhase"

set node913 [$diag addNode cad_class 0.0 300.0 120.0 36.0]
$node913 setLabel "name" "PushButton"
$node913 setProp "is_folded" "1"
$node913 setScope "name" "cl" "scopePhase"

set node915 [$diag addNode cad_class 0.0 200.0 120.0 36.0]
$node915 setLabel "name" "C_PushButton"
$node915 setProp "is_folded" "1"
$node915 setScope "name" "cl" "scopePhase"

set node917 [$diag addNode cad_class 623.0 100.0 120.0 36.0]
$node917 setLabel "name" "StaticField"
$node917 setProp "is_folded" "1"
$node917 setScope "name" "cl" "scopePhase"

set node918 [$diag addNode cad_class 623.0 0.0 120.0 36.0]
$node918 setLabel "name" "C_StaticField"
$node918 setProp "is_folded" "1"
$node918 setScope "name" "cl" "scopePhase"

set node872 [$diag addRake generalization $node874 $node873 1300.5 236.0 1295.0 300.0 268.0]

set conn919 [$node872 getInConn]
set segm920 [$conn919 getFirstSegm]

set conn921 [$node872 getFirstOutConn]
set segm922 [$conn921 getFirstSegm]

set node875 [$diag addRake generalization $node877 $node876 1133.5 436.0 1124.0 500.0 468.0]

set conn923 [$node875 getInConn]
set segm924 [$conn923 getFirstSegm]

set conn925 [$node875 getFirstOutConn]
set segm926 [$conn925 getFirstSegm]

set node878 [$diag addRake generalization $node880 $node879 972.0 436.0 972.0 500.0 468.0]

set conn927 [$node878 getInConn]
set segm928 [$conn927 getFirstSegm]

set conn929 [$node878 getFirstOutConn]
set segm930 [$conn929 getFirstSegm]

set node881 [$diag addRake generalization $node883 $node882 820.0 636.0 820.0 700.0 668.0]

set conn931 [$node881 getInConn]
set segm932 [$conn931 getFirstSegm]

set conn933 [$node881 getFirstOutConn]
set segm934 [$conn933 getFirstSegm]

set node884 [$diag addRake generalization $node886 $node885 668.0 836.0 668.0 900.0 868.0]

set conn935 [$node884 getInConn]
set segm936 [$conn935 getFirstSegm]

set conn937 [$node884 getFirstOutConn]
set segm938 [$conn937 getFirstSegm]

set node887 [$diag addRake generalization $node890 $node888 516.0 836.0 516.0 900.0 868.0]

set conn939 [$node887 getInConn]
set segm940 [$conn939 getFirstSegm]

set conn941 [$node887 getFirstOutConn]
set segm942 [$conn941 getFirstSegm]

set node889 [$diag addRake generalization $node892 $node886 592.0 736.0 668.0 800.0 768.0]

set conn943 [$node889 getInConn]
set segm944 [$conn943 getFirstSegm]

set conn945 [$node889 getFirstOutConn]
set segm946 [$conn945 getFirstSegm]

set conn947 [$diag addConn generalization_conn $node889 $node890 516.0 768.0 516.0 800.0]
set segm948 [$conn947 getFirstSegm]

set node891 [$diag addRake generalization $node893 $node892 592.0 636.0 592.0 700.0 668.0]

set conn949 [$node891 getInConn]
set segm950 [$conn949 getFirstSegm]

set conn951 [$node891 getFirstOutConn]
set segm952 [$conn951 getFirstSegm]

set node894 [$diag addRake generalization $node896 $node895 364.0 836.0 364.0 900.0 868.0]

set conn953 [$node894 getInConn]
set segm954 [$conn953 getFirstSegm]

set conn955 [$node894 getFirstOutConn]
set segm956 [$conn955 getFirstSegm]

set node897 [$diag addRake generalization $node900 $node898 212.0 836.0 212.0 900.0 868.0]

set conn957 [$node897 getInConn]
set segm958 [$conn957 getFirstSegm]

set conn959 [$node897 getFirstOutConn]
set segm960 [$conn959 getFirstSegm]

set node899 [$diag addRake generalization $node902 $node896 288.0 736.0 364.0 800.0 768.0]

set conn961 [$node899 getInConn]
set segm962 [$conn961 getFirstSegm]

set conn963 [$node899 getFirstOutConn]
set segm964 [$conn963 getFirstSegm]

set conn965 [$diag addConn generalization_conn $node899 $node900 212.0 768.0 212.0 800.0]
set segm966 [$conn965 getFirstSegm]

set node901 [$diag addRake generalization $node904 $node902 288.0 636.0 288.0 700.0 668.0]

set conn967 [$node901 getInConn]
set segm968 [$conn967 getFirstSegm]

set conn969 [$node901 getFirstOutConn]
set segm970 [$conn969 getFirstSegm]

set node903 [$diag addRake generalization $node906 $node883 516.0 536.0 820.0 600.0 568.0]

set conn971 [$node903 getInConn]
set segm972 [$conn971 getFirstSegm]

set conn973 [$node903 getFirstOutConn]
set segm974 [$conn973 getFirstSegm]

set conn975 [$diag addConn generalization_conn $node903 $node893 592.0 568.0 592.0 600.0]
set segm976 [$conn975 getFirstSegm]

set conn977 [$diag addConn generalization_conn $node903 $node904 288.0 568.0 288.0 600.0]
set segm978 [$conn977 getFirstSegm]

set node905 [$diag addRake generalization $node908 $node906 516.0 436.0 516.0 500.0 468.0]

set conn979 [$node905 getInConn]
set segm980 [$conn979 getFirstSegm]

set conn981 [$node905 getFirstOutConn]
set segm982 [$conn981 getFirstSegm]

set node907 [$diag addRake generalization $node910 $node877 677.5 336.0 1133.5 400.0 368.0]

set conn983 [$node907 getInConn]
set segm984 [$conn983 getFirstSegm]

set conn985 [$node907 getFirstOutConn]
set segm986 [$conn985 getFirstSegm]

set conn987 [$diag addConn generalization_conn $node907 $node880 972.0 368.0 972.0 400.0]
set segm988 [$conn987 getFirstSegm]

set conn989 [$diag addConn generalization_conn $node907 $node908 516.0 368.0 516.0 400.0]
set segm990 [$conn989 getFirstSegm]

set node909 [$diag addRake generalization $node911 $node910 677.5 236.0 677.5 300.0 268.0]

set conn991 [$node909 getInConn]
set segm992 [$conn991 getFirstSegm]

set conn993 [$node909 getFirstOutConn]
set segm994 [$conn993 getFirstSegm]

set node912 [$diag addRake generalization $node915 $node913 60.0 236.0 60.0 300.0 268.0]

set conn995 [$node912 getInConn]
set segm996 [$conn995 getFirstSegm]

set conn997 [$node912 getFirstOutConn]
set segm998 [$conn997 getFirstSegm]

set node914 [$diag addRake generalization $node917 $node874 683.0 136.0 1300.5 200.0 168.0]

set conn999 [$node914 getInConn]
set segm1000 [$conn999 getFirstSegm]

set conn1001 [$node914 getFirstOutConn]
set segm1002 [$conn1001 getFirstSegm]

set conn1003 [$diag addConn generalization_conn $node914 $node911 677.5 168.0 677.5 200.0]
set segm1004 [$conn1003 getFirstSegm]

set conn1005 [$diag addConn generalization_conn $node914 $node915 60.0 168.0 60.0 200.0]
set segm1006 [$conn1005 getFirstSegm]

set node916 [$diag addRake generalization $node918 $node917 683.0 36.0 683.0 100.0 68.0]

set conn1007 [$node916 getInConn]
set segm1008 [$conn1007 getFirstSegm]

set conn1009 [$node916 getFirstOutConn]
set segm1010 [$conn1009 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_SystemFontDescriptorTree "DisplayProject" "" "" "" "" "" 1 1]

set node2 [$diag addNode cad_class 0.0 100.0 172.0 36.0]
$node2 setLabel "name" "SystemFontDescriptor"
$node2 setProp "is_folded" "1"
$node2 setScope "name" "cl" "scopePhase"

set node3 [$diag addNode cad_class 0.0 0.0 191.0 36.0]
$node3 setLabel "name" "C_SystemFontDescriptor"
$node3 setProp "is_folded" "1"
$node3 setScope "name" "cl" "scopePhase"

set node1 [$diag addRake generalization $node3 $node2 95.5 36.0 86.0 100.0 68.0]

set conn4 [$node1 getInConn]
set segm5 [$conn4 getFirstSegm]

set conn6 [$node1 getFirstOutConn]
set segm7 [$conn6 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_TextEngineTree "DisplayProject" "" "" "" "" "" 1 1]

set node262 [$diag addNode cad_class 206.0 300.0 164.0 36.0]
$node262 setLabel "name" "SingleLineTextEngine"
$node262 setProp "is_folded" "1"
$node262 setScope "name" "cl" "scopePhase"

set node263 [$diag addNode cad_class 206.0 200.0 183.0 36.0]
$node263 setLabel "name" "C_SingleLineTextEngine"
$node263 setProp "is_folded" "1"
$node263 setScope "name" "cl" "scopePhase"

set node265 [$diag addNode cad_class 0.0 300.0 155.0 36.0]
$node265 setLabel "name" "MultiLineTextEngine"
$node265 setProp "is_folded" "1"
$node265 setScope "name" "cl" "scopePhase"

set node267 [$diag addNode cad_class 0.0 200.0 174.0 36.0]
$node267 setLabel "name" "C_MultiLineTextEngine"
$node267 setProp "is_folded" "1"
$node267 setScope "name" "cl" "scopePhase"

set node269 [$diag addNode cad_class 134.5 100.0 120.0 36.0]
$node269 setLabel "name" "TextEngine"
$node269 setProp "is_folded" "1"
$node269 setScope "name" "cl" "scopePhase"

set node270 [$diag addNode cad_class 134.5 0.0 120.0 36.0]
$node270 setLabel "name" "C_TextEngine"
$node270 setProp "is_folded" "1"
$node270 setScope "name" "cl" "scopePhase"

set node261 [$diag addRake generalization $node263 $node262 297.5 236.0 288.0 300.0 268.0]

set conn271 [$node261 getInConn]
set segm272 [$conn271 getFirstSegm]

set conn273 [$node261 getFirstOutConn]
set segm274 [$conn273 getFirstSegm]

set node264 [$diag addRake generalization $node267 $node265 87.0 236.0 77.5 300.0 268.0]

set conn275 [$node264 getInConn]
set segm276 [$conn275 getFirstSegm]

set conn277 [$node264 getFirstOutConn]
set segm278 [$conn277 getFirstSegm]

set node266 [$diag addRake generalization $node269 $node263 194.5 136.0 297.5 200.0 168.0]

set conn279 [$node266 getInConn]
set segm280 [$conn279 getFirstSegm]

set conn281 [$node266 getFirstOutConn]
set segm282 [$conn281 getFirstSegm]

set conn283 [$diag addConn generalization_conn $node266 $node267 87.0 168.0 87.0 200.0]
set segm284 [$conn283 getFirstSegm]

set node268 [$diag addRake generalization $node270 $node269 194.5 36.0 194.5 100.0 68.0]

set conn285 [$node268 getInConn]
set segm286 [$conn285 getFirstSegm]

set conn287 [$node268 getFirstOutConn]
set segm288 [$conn287 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_ViewportTree "DisplayProject" "" "" "" "" "" 1 1]

set node864 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node864 setLabel "name" "Viewport"
$node864 setProp "is_folded" "1"
$node864 setScope "name" "cl" "scopePhase"

set node865 [$diag addNode cad_class 0.0 0.0 120.0 36.0]
$node865 setLabel "name" "C_Viewport"
$node865 setProp "is_folded" "1"
$node865 setScope "name" "cl" "scopePhase"

set node863 [$diag addRake generalization $node865 $node864 60.0 36.0 60.0 100.0 68.0]

set conn866 [$node863 getInConn]
set segm867 [$conn866 getFirstSegm]

set conn868 [$node863 getFirstOutConn]
set segm869 [$conn868 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new C_WindowTree "DisplayProject" "" "" "" "" "" 1 1]

set node433 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node433 setLabel "name" "Window"
$node433 setProp "is_folded" "1"
$node433 setScope "name" "cl" "scopePhase"

set node434 [$diag addNode cad_class 0.0 0.0 120.0 36.0]
$node434 setLabel "name" "C_Window"
$node434 setProp "is_folded" "1"
$node434 setScope "name" "cl" "scopePhase"

set node432 [$diag addRake generalization $node434 $node433 60.0 36.0 60.0 100.0 68.0]

set conn435 [$node432 getInConn]
set segm436 [$conn435 getFirstSegm]

set conn437 [$node432 getFirstOutConn]
set segm438 [$conn437 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new CapsuleTree "DisplayProject" "" "" "" "" "" 1 1]

set node425 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node425 setLabel "name" "DropCapsule"
$node425 setProp "is_folded" "1"
$node425 setScope "name" "cl" "scopePhase"

set node426 [$diag addNode cad_class 0.0 0.0 120.0 36.0]
$node426 setLabel "name" "Capsule"
$node426 setProp "is_folded" "1"
$node426 setScope "name" "cl" "scopePhase"

set node424 [$diag addRake generalization $node426 $node425 60.0 36.0 60.0 100.0 68.0]

set conn427 [$node424 getInConn]
set segm428 [$conn427 getFirstSegm]

set conn429 [$node424 getFirstOutConn]
set segm430 [$conn429 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new dpChangeNotificationTree "DisplayProject" "" "" "" "" "" 1 1]

set node1322 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node1322 setLabel "name" "VirtualTextCN"
$node1322 setProp "is_folded" "1"
$node1322 setScope "name" "cl" "scopePhase"

set node1323 [$diag addNode cad_class 0.0 0.0 149.0 36.0]
$node1323 setLabel "name" "ChangeNotification"
$node1323 setProp "is_folded" "1"
$node1323 setScope "name" "cl" "scopePhase"

set node1321 [$diag addRake generalization $node1323 $node1322 74.5 36.0 60.0 100.0 68.0]

set conn1324 [$node1321 getInConn]
set segm1325 [$conn1324 getFirstSegm]

set conn1326 [$node1321 getFirstOutConn]
set segm1327 [$conn1326 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new DispObjGenTree "DisplayProject" "" "" "" "" "" 1 1]

set node1300 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node1300 setLabel "name" "WSdog"
$node1300 setProp "is_folded" "1"
$node1300 setScope "name" "cl" "scopePhase"

set node1301 [$diag addNode cad_class 0.0 0.0 120.0 36.0]
$node1301 setLabel "name" "DispObjGen"
$node1301 setProp "is_folded" "1"
$node1301 setScope "name" "cl" "scopePhase"

set node1299 [$diag addRake generalization $node1301 $node1300 60.0 36.0 60.0 100.0 68.0]

set conn1302 [$node1299 getInConn]
set segm1303 [$conn1302 getFirstSegm]

set conn1304 [$node1299 getFirstOutConn]
set segm1305 [$conn1304 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new dpDispatchableObjectTree "DisplayProject" "" "" "" "" "" 1 1]

set node324 [$diag addNode cad_class 5585.0 200.0 150.0 36.0]
$node324 setLabel "name" "ActionNoOperation"
$node324 setProp "is_folded" "1"
$node324 setScope "name" "cl" "scopePhase"

set node325 [$diag addNode cad_class 5390.0 200.0 163.0 36.0]
$node325 setLabel "name" "AlarmDispatchObject"
$node325 setProp "is_folded" "1"
$node325 setScope "name" "cl" "scopePhase"

set node326 [$diag addNode cad_class 5156.0 200.0 202.0 36.0]
$node326 setLabel "name" "ActionChangeDisplayState"
$node326 setProp "is_folded" "1"
$node326 setScope "name" "cl" "scopePhase"

set node327 [$diag addNode cad_class 4932.0 200.0 192.0 36.0]
$node327 setLabel "name" "ActionChangeMenuValue"
$node327 setProp "is_folded" "1"
$node327 setScope "name" "cl" "scopePhase"

set node328 [$diag addNode cad_class 4717.0 200.0 183.0 36.0]
$node328 setLabel "name" "ActionChangeClipboard"
$node328 setProp "is_folded" "1"
$node328 setScope "name" "cl" "scopePhase"

set node329 [$diag addNode cad_class 4544.0 200.0 141.0 36.0]
$node329 setLabel "name" "ActionDropObject"
$node329 setProp "is_folded" "1"
$node329 setScope "name" "cl" "scopePhase"

set node330 [$diag addNode cad_class 4318.0 200.0 194.0 36.0]
$node330 setLabel "name" "ActionTreeFieldOperation"
$node330 setProp "is_folded" "1"
$node330 setScope "name" "cl" "scopePhase"

set node331 [$diag addNode cad_class 4149.0 200.0 137.0 36.0]
$node331 setLabel "name" "ActionTouchField"
$node331 setProp "is_folded" "1"
$node331 setScope "name" "cl" "scopePhase"

set node332 [$diag addNode cad_class 3982.0 200.0 135.0 36.0]
$node332 setLabel "name" "ActionScrollField"
$node332 setProp "is_folded" "1"
$node332 setScope "name" "cl" "scopePhase"

set node333 [$diag addNode cad_class 3814.0 200.0 136.0 36.0]
$node333 setLabel "name" "ActionRouteField"
$node333 setProp "is_folded" "1"
$node333 setScope "name" "cl" "scopePhase"

set node334 [$diag addNode cad_class 3610.0 200.0 172.0 36.0]
$node334 setLabel "name" "ActionCompletePopup"
$node334 setProp "is_folded" "1"
$node334 setScope "name" "cl" "scopePhase"

set node335 [$diag addNode cad_class 3421.0 200.0 157.0 36.0]
$node335 setLabel "name" "ActionChangeFocus"
$node335 setProp "is_folded" "1"
$node335 setScope "name" "cl" "scopePhase"

set node336 [$diag addNode cad_class 3269.0 200.0 120.0 36.0]
$node336 setLabel "name" "ActionExitField"
$node336 setProp "is_folded" "1"
$node336 setScope "name" "cl" "scopePhase"

set node337 [$diag addNode cad_class 3113.0 200.0 124.0 36.0]
$node337 setLabel "name" "ActionMarkLine"
$node337 setProp "is_folded" "1"
$node337 setScope "name" "cl" "scopePhase"

set node338 [$diag addNode cad_class 2894.0 200.0 187.0 36.0]
$node338 setLabel "name" "ActionChangeFieldValue"
$node338 setProp "is_folded" "1"
$node338 setScope "name" "cl" "scopePhase"

set node339 [$diag addNode cad_class 2685.0 200.0 177.0 36.0]
$node339 setLabel "name" "ActionAdjustArrayField"
$node339 setProp "is_folded" "1"
$node339 setScope "name" "cl" "scopePhase"

set node340 [$diag addNode cad_class 2508.0 200.0 145.0 36.0]
$node340 setLabel "name" "ActionStretchField"
$node340 setProp "is_folded" "1"
$node340 setScope "name" "cl" "scopePhase"

set node341 [$diag addNode cad_class 2289.0 200.0 187.0 36.0]
$node341 setLabel "name" "ActionSetPropertyString"
$node341 setProp "is_folded" "1"
$node341 setScope "name" "cl" "scopePhase"

set node342 [$diag addNode cad_class 2067.0 200.0 190.0 36.0]
$node342 setLabel "name" "ActionSetPropertyObject"
$node342 setProp "is_folded" "1"
$node342 setScope "name" "cl" "scopePhase"

set node343 [$diag addNode cad_class 1865.0 200.0 170.0 36.0]
$node343 setLabel "name" "ActionSetProperty4Int"
$node343 setProp "is_folded" "1"
$node343 setScope "name" "cl" "scopePhase"

set node344 [$diag addNode cad_class 1663.0 200.0 170.0 36.0]
$node344 setLabel "name" "ActionSetProperty2Int"
$node344 setProp "is_folded" "1"
$node344 setScope "name" "cl" "scopePhase"

set node345 [$diag addNode cad_class 1461.0 200.0 170.0 36.0]
$node345 setLabel "name" "ActionSetProperty1Int"
$node345 setProp "is_folded" "1"
$node345 setScope "name" "cl" "scopePhase"

set node346 [$diag addNode cad_class 1250.0 200.0 179.0 36.0]
$node346 setLabel "name" "ActionSelectionChange"
$node346 setProp "is_folded" "1"
$node346 setScope "name" "cl" "scopePhase"

set node347 [$diag addNode cad_class 1088.0 200.0 130.0 36.0]
$node347 setLabel "name" "ActionShutdown"
$node347 setProp "is_folded" "1"
$node347 setScope "name" "cl" "scopePhase"

set node348 [$diag addNode cad_class 917.0 200.0 139.0 36.0]
$node348 setLabel "name" "ActionResizeField"
$node348 setProp "is_folded" "1"
$node348 setScope "name" "cl" "scopePhase"

set node349 [$diag addNode cad_class 753.0 200.0 132.0 36.0]
$node349 setLabel "name" "ActionMoveField"
$node349 setProp "is_folded" "1"
$node349 setScope "name" "cl" "scopePhase"

set node350 [$diag addNode cad_class 552.0 200.0 169.0 36.0]
$node350 setLabel "name" "ActionMenuCommand"
$node350 setProp "is_folded" "1"
$node350 setScope "name" "cl" "scopePhase"

set node351 [$diag addNode cad_class 355.0 200.0 165.0 36.0]
$node351 setLabel "name" "ActionMarkRectangle"
$node351 setProp "is_folded" "1"
$node351 setScope "name" "cl" "scopePhase"

set node352 [$diag addNode cad_class 191.0 200.0 132.0 36.0]
$node352 setLabel "name" "ActionMarkPoint"
$node352 setProp "is_folded" "1"
$node352 setScope "name" "cl" "scopePhase"

set node354 [$diag addNode cad_class 0.0 200.0 159.0 36.0]
$node354 setLabel "name" "ActionAdjustRowCol"
$node354 setProp "is_folded" "1"
$node354 setScope "name" "cl" "scopePhase"

set node356 [$diag addNode cad_class 2807.5 100.0 120.0 36.0]
$node356 setLabel "name" "Action"
$node356 setProp "is_folded" "1"
$node356 setScope "name" "cl" "scopePhase"

set node357 [$diag addNode cad_class 2791.5 0.0 152.0 36.0]
$node357 setLabel "name" "DispatchableObject"
$node357 setProp "is_folded" "1"
$node357 setScope "name" "cl" "scopePhase"

set node353 [$diag addRake generalization $node356 $node324 2867.5 136.0 5660.0 200.0 168.0]

set conn358 [$node353 getInConn]
set segm359 [$conn358 getFirstSegm]

set conn360 [$node353 getFirstOutConn]
set segm361 [$conn360 getFirstSegm]

set conn362 [$diag addConn generalization_conn $node353 $node325 5471.5 168.0 5471.5 200.0]
set segm363 [$conn362 getFirstSegm]

set conn364 [$diag addConn generalization_conn $node353 $node326 5257.0 168.0 5257.0 200.0]
set segm365 [$conn364 getFirstSegm]

set conn366 [$diag addConn generalization_conn $node353 $node327 5028.0 168.0 5028.0 200.0]
set segm367 [$conn366 getFirstSegm]

set conn368 [$diag addConn generalization_conn $node353 $node328 4808.5 168.0 4808.5 200.0]
set segm369 [$conn368 getFirstSegm]

set conn370 [$diag addConn generalization_conn $node353 $node329 4614.5 168.0 4614.5 200.0]
set segm371 [$conn370 getFirstSegm]

set conn372 [$diag addConn generalization_conn $node353 $node330 4415.0 168.0 4415.0 200.0]
set segm373 [$conn372 getFirstSegm]

set conn374 [$diag addConn generalization_conn $node353 $node331 4217.5 168.0 4217.5 200.0]
set segm375 [$conn374 getFirstSegm]

set conn376 [$diag addConn generalization_conn $node353 $node332 4049.5 168.0 4049.5 200.0]
set segm377 [$conn376 getFirstSegm]

set conn378 [$diag addConn generalization_conn $node353 $node333 3882.0 168.0 3882.0 200.0]
set segm379 [$conn378 getFirstSegm]

set conn380 [$diag addConn generalization_conn $node353 $node334 3696.0 168.0 3696.0 200.0]
set segm381 [$conn380 getFirstSegm]

set conn382 [$diag addConn generalization_conn $node353 $node335 3499.5 168.0 3499.5 200.0]
set segm383 [$conn382 getFirstSegm]

set conn384 [$diag addConn generalization_conn $node353 $node336 3329.0 168.0 3329.0 200.0]
set segm385 [$conn384 getFirstSegm]

set conn386 [$diag addConn generalization_conn $node353 $node337 3175.0 168.0 3175.0 200.0]
set segm387 [$conn386 getFirstSegm]

set conn388 [$diag addConn generalization_conn $node353 $node338 2987.5 168.0 2987.5 200.0]
set segm389 [$conn388 getFirstSegm]

set conn390 [$diag addConn generalization_conn $node353 $node339 2773.5 168.0 2773.5 200.0]
set segm391 [$conn390 getFirstSegm]

set conn392 [$diag addConn generalization_conn $node353 $node340 2580.5 168.0 2580.5 200.0]
set segm393 [$conn392 getFirstSegm]

set conn394 [$diag addConn generalization_conn $node353 $node341 2382.5 168.0 2382.5 200.0]
set segm395 [$conn394 getFirstSegm]

set conn396 [$diag addConn generalization_conn $node353 $node342 2162.0 168.0 2162.0 200.0]
set segm397 [$conn396 getFirstSegm]

set conn398 [$diag addConn generalization_conn $node353 $node343 1950.0 168.0 1950.0 200.0]
set segm399 [$conn398 getFirstSegm]

set conn400 [$diag addConn generalization_conn $node353 $node344 1748.0 168.0 1748.0 200.0]
set segm401 [$conn400 getFirstSegm]

set conn402 [$diag addConn generalization_conn $node353 $node345 1546.0 168.0 1546.0 200.0]
set segm403 [$conn402 getFirstSegm]

set conn404 [$diag addConn generalization_conn $node353 $node346 1339.5 168.0 1339.5 200.0]
set segm405 [$conn404 getFirstSegm]

set conn406 [$diag addConn generalization_conn $node353 $node347 1153.0 168.0 1153.0 200.0]
set segm407 [$conn406 getFirstSegm]

set conn408 [$diag addConn generalization_conn $node353 $node348 986.5 168.0 986.5 200.0]
set segm409 [$conn408 getFirstSegm]

set conn410 [$diag addConn generalization_conn $node353 $node349 819.0 168.0 819.0 200.0]
set segm411 [$conn410 getFirstSegm]

set conn412 [$diag addConn generalization_conn $node353 $node350 636.5 168.0 636.5 200.0]
set segm413 [$conn412 getFirstSegm]

set conn414 [$diag addConn generalization_conn $node353 $node351 437.5 168.0 437.5 200.0]
set segm415 [$conn414 getFirstSegm]

set conn416 [$diag addConn generalization_conn $node353 $node352 257.0 168.0 257.0 200.0]
set segm417 [$conn416 getFirstSegm]

set conn418 [$diag addConn generalization_conn $node353 $node354 79.5 168.0 79.5 200.0]
set segm419 [$conn418 getFirstSegm]

set node355 [$diag addRake generalization $node357 $node356 2867.5 36.0 2867.5 100.0 68.0]

set conn420 [$node355 getInConn]
set segm421 [$conn420 getFirstSegm]

set conn422 [$node355 getFirstOutConn]
set segm423 [$conn422 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new GenericMapTree "DisplayProject" "" "" "" "" "" 1 1]

set node1012 [$diag addNode cad_class 162.0 200.0 120.0 36.0]
$node1012 setLabel "name" "EmptyPage"
$node1012 setProp "is_folded" "1"
$node1012 setScope "name" "cl" "scopePhase"

set node1014 [$diag addNode cad_class 0.0 200.0 130.0 36.0]
$node1014 setLabel "name" "4GLUserWindow"
$node1014 setProp "is_folded" "1"
$node1014 setScope "name" "cl" "scopePhase"

set node1016 [$diag addNode cad_class 81.0 100.0 120.0 36.0]
$node1016 setLabel "name" "UserWindow"
$node1016 setProp "is_folded" "1"
$node1016 setScope "name" "cl" "scopePhase"

set node1017 [$diag addNode cad_class 81.0 0.0 120.0 36.0]
$node1017 setLabel "name" "GenericMap"
$node1017 setProp "is_folded" "1"
$node1017 setScope "name" "cl" "scopePhase"

set node1013 [$diag addRake generalization $node1016 $node1012 141.0 136.0 222.0 200.0 168.0]

set conn1018 [$node1013 getInConn]
set segm1019 [$conn1018 getFirstSegm]

set conn1020 [$node1013 getFirstOutConn]
set segm1021 [$conn1020 getFirstSegm]

set conn1022 [$diag addConn generalization_conn $node1013 $node1014 65.0 168.0 65.0 200.0]
set segm1023 [$conn1022 getFirstSegm]

set node1015 [$diag addRake generalization $node1017 $node1016 141.0 36.0 141.0 100.0 68.0]

set conn1024 [$node1015 getInConn]
set segm1025 [$conn1024 getFirstSegm]

set conn1026 [$node1015 getFirstOutConn]
set segm1027 [$conn1026 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new GenericNodeTree "DisplayProject" "" "" "" "" "" 1 1]

set node768 [$diag addNode cad_class 1138.0 200.0 131.0 36.0]
$node768 setLabel "name" "4GLDisplayNode"
$node768 setProp "is_folded" "1"
$node768 setScope "name" "cl" "scopePhase"

set node769 [$diag addNode cad_class 971.0 200.0 135.0 36.0]
$node769 setLabel "name" "DescriptorObject"
$node769 setProp "is_folded" "1"
$node769 setScope "name" "cl" "scopePhase"

set node770 [$diag addNode cad_class 819.0 200.0 120.0 36.0]
$node770 setLabel "name" "SourceObject"
$node770 setProp "is_folded" "1"
$node770 setScope "name" "cl" "scopePhase"

set node771 [$diag addNode cad_class 667.0 200.0 120.0 36.0]
$node771 setLabel "name" "FileObject"
$node771 setProp "is_folded" "1"
$node771 setScope "name" "cl" "scopePhase"

set node772 [$diag addNode cad_class 515.0 200.0 120.0 36.0]
$node772 setLabel "name" "MenuObject"
$node772 setProp "is_folded" "1"
$node772 setScope "name" "cl" "scopePhase"

set node773 [$diag addNode cad_class 363.0 200.0 120.0 36.0]
$node773 setLabel "name" "ScopeObject"
$node773 setProp "is_folded" "1"
$node773 setScope "name" "cl" "scopePhase"

set node774 [$diag addNode cad_class 193.0 200.0 138.0 36.0]
$node774 setLabel "name" "RepositoryObject"
$node774 setProp "is_folded" "1"
$node774 setScope "name" "cl" "scopePhase"

set node776 [$diag addNode cad_class 0.0 200.0 161.0 36.0]
$node776 setLabel "name" "ClassPropertyObject"
$node776 setProp "is_folded" "1"
$node776 setScope "name" "cl" "scopePhase"

set node778 [$diag addNode cad_class 574.5 100.0 120.0 36.0]
$node778 setLabel "name" "DisplayNode"
$node778 setProp "is_folded" "1"
$node778 setScope "name" "cl" "scopePhase"

set node779 [$diag addNode cad_class 574.5 0.0 120.0 36.0]
$node779 setLabel "name" "GenericNode"
$node779 setProp "is_folded" "1"
$node779 setScope "name" "cl" "scopePhase"

set node775 [$diag addRake generalization $node778 $node768 634.5 136.0 1203.5 200.0 168.0]

set conn780 [$node775 getInConn]
set segm781 [$conn780 getFirstSegm]

set conn782 [$node775 getFirstOutConn]
set segm783 [$conn782 getFirstSegm]

set conn784 [$diag addConn generalization_conn $node775 $node769 1038.5 168.0 1038.5 200.0]
set segm785 [$conn784 getFirstSegm]

set conn786 [$diag addConn generalization_conn $node775 $node770 879.0 168.0 879.0 200.0]
set segm787 [$conn786 getFirstSegm]

set conn788 [$diag addConn generalization_conn $node775 $node771 727.0 168.0 727.0 200.0]
set segm789 [$conn788 getFirstSegm]

set conn790 [$diag addConn generalization_conn $node775 $node772 575.0 168.0 575.0 200.0]
set segm791 [$conn790 getFirstSegm]

set conn792 [$diag addConn generalization_conn $node775 $node773 423.0 168.0 423.0 200.0]
set segm793 [$conn792 getFirstSegm]

set conn794 [$diag addConn generalization_conn $node775 $node774 262.0 168.0 262.0 200.0]
set segm795 [$conn794 getFirstSegm]

set conn796 [$diag addConn generalization_conn $node775 $node776 80.5 168.0 80.5 200.0]
set segm797 [$conn796 getFirstSegm]

set node777 [$diag addRake generalization $node779 $node778 634.5 36.0 634.5 100.0 68.0]

set conn798 [$node777 getInConn]
set segm799 [$conn798 getFirstSegm]

set conn800 [$node777 getFirstOutConn]
set segm801 [$conn800 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new MappedAttributeTree "DisplayProject" "" "" "" "" "" 1 1]

set node447 [$diag addNode cad_class 2594.0 100.0 155.0 36.0]
$node447 setLabel "name" "OutlineColumnDesc"
$node447 setProp "is_folded" "1"
$node447 setScope "name" "cl" "scopePhase"

set node448 [$diag addNode cad_class 2442.0 500.0 120.0 36.0]
$node448 setLabel "name" "C_StaticField"
$node448 setProp "is_folded" "1"
$node448 setScope "name" "cl" "scopePhase"

set node449 [$diag addNode cad_class 2290.0 700.0 120.0 36.0]
$node449 setLabel "name" "C_SimpleField"
$node449 setProp "is_folded" "1"
$node449 setScope "name" "cl" "scopePhase"

set node450 [$diag addNode cad_class 2138.0 900.0 120.0 36.0]
$node450 setLabel "name" "C_Viewport"
$node450 setProp "is_folded" "1"
$node450 setScope "name" "cl" "scopePhase"

set node451 [$diag addNode cad_class 1986.0 900.0 120.0 36.0]
$node451 setLabel "name" "C_Window"
$node451 setProp "is_folded" "1"
$node451 setScope "name" "cl" "scopePhase"

set node453 [$diag addNode cad_class 1763.0 1200.0 172.0 36.0]
$node453 setLabel "name" "OldCompoundGraphic"
$node453 setProp "is_folded" "1"
$node453 setScope "name" "cl" "scopePhase"

set node455 [$diag addNode cad_class 1763.0 1100.0 191.0 36.0]
$node455 setLabel "name" "C_OldCompoundGraphic"
$node455 setProp "is_folded" "1"
$node455 setScope "name" "cl" "scopePhase"

set node457 [$diag addNode cad_class 1798.5 1000.0 120.0 36.0]
$node457 setLabel "name" "ElasticField"
$node457 setProp "is_folded" "1"
$node457 setScope "name" "cl" "scopePhase"

set node458 [$diag addNode cad_class 1798.5 900.0 120.0 36.0]
$node458 setLabel "name" "C_ElasticField"
$node458 setProp "is_folded" "1"
$node458 setScope "name" "cl" "scopePhase"

set node460 [$diag addNode cad_class 1611.0 1200.0 120.0 36.0]
$node460 setLabel "name" "ArrayField"
$node460 setProp "is_folded" "1"
$node460 setScope "name" "cl" "scopePhase"

set node461 [$diag addNode cad_class 1611.0 1100.0 120.0 36.0]
$node461 setLabel "name" "C_ArrayField"
$node461 setProp "is_folded" "1"
$node461 setScope "name" "cl" "scopePhase"

set node463 [$diag addNode cad_class 1459.0 1200.0 120.0 36.0]
$node463 setLabel "name" "GridField"
$node463 setProp "is_folded" "1"
$node463 setScope "name" "cl" "scopePhase"

set node465 [$diag addNode cad_class 1459.0 1100.0 120.0 36.0]
$node465 setLabel "name" "C_GridField"
$node465 setProp "is_folded" "1"
$node465 setScope "name" "cl" "scopePhase"

set node467 [$diag addNode cad_class 1535.0 1000.0 120.0 36.0]
$node467 setLabel "name" "MatrixField"
$node467 setProp "is_folded" "1"
$node467 setScope "name" "cl" "scopePhase"

set node468 [$diag addNode cad_class 1535.0 900.0 120.0 36.0]
$node468 setLabel "name" "C_MatrixField"
$node468 setProp "is_folded" "1"
$node468 setScope "name" "cl" "scopePhase"

set node470 [$diag addNode cad_class 1307.0 1200.0 120.0 36.0]
$node470 setLabel "name" "PrintPage"
$node470 setProp "is_folded" "1"
$node470 setScope "name" "cl" "scopePhase"

set node471 [$diag addNode cad_class 1307.0 1100.0 120.0 36.0]
$node471 setLabel "name" "C_PrintPage"
$node471 setProp "is_folded" "1"
$node471 setScope "name" "cl" "scopePhase"

set node473 [$diag addNode cad_class 1109.0 1200.0 147.0 36.0]
$node473 setLabel "name" "CompoundGraphic"
$node473 setProp "is_folded" "1"
$node473 setScope "name" "cl" "scopePhase"

set node475 [$diag addNode cad_class 1109.0 1100.0 166.0 36.0]
$node475 setLabel "name" "C_CompoundGraphic"
$node475 setProp "is_folded" "1"
$node475 setScope "name" "cl" "scopePhase"

set node477 [$diag addNode cad_class 1208.0 1000.0 120.0 36.0]
$node477 setLabel "name" "Panel"
$node477 setProp "is_folded" "1"
$node477 setScope "name" "cl" "scopePhase"

set node479 [$diag addNode cad_class 1208.0 900.0 120.0 36.0]
$node479 setLabel "name" "C_Panel"
$node479 setProp "is_folded" "1"
$node479 setScope "name" "cl" "scopePhase"

set node481 [$diag addNode cad_class 1620.5 800.0 126.0 36.0]
$node481 setLabel "name" "CompoundField"
$node481 setProp "is_folded" "1"
$node481 setScope "name" "cl" "scopePhase"

set node483 [$diag addNode cad_class 1611.0 700.0 145.0 36.0]
$node483 setLabel "name" "C_CompoundField"
$node483 setProp "is_folded" "1"
$node483 setScope "name" "cl" "scopePhase"

set node485 [$diag addNode cad_class 1699.5 600.0 120.0 36.0]
$node485 setLabel "name" "VariableField"
$node485 setProp "is_folded" "1"
$node485 setScope "name" "cl" "scopePhase"

set node487 [$diag addNode cad_class 1697.0 500.0 125.0 36.0]
$node487 setLabel "name" "C_VariableField"
$node487 setProp "is_folded" "1"
$node487 setScope "name" "cl" "scopePhase"

set node489 [$diag addNode cad_class 1775.5 400.0 120.0 36.0]
$node489 setLabel "name" "FieldWidget"
$node489 setProp "is_folded" "1"
$node489 setScope "name" "cl" "scopePhase"

set node490 [$diag addNode cad_class 1775.5 300.0 120.0 36.0]
$node490 setLabel "name" "C_FieldWidget"
$node490 setProp "is_folded" "1"
$node490 setScope "name" "cl" "scopePhase"

set node492 [$diag addNode cad_class 957.0 1000.0 120.0 36.0]
$node492 setLabel "name" "MenuList"
$node492 setProp "is_folded" "1"
$node492 setScope "name" "cl" "scopePhase"

set node493 [$diag addNode cad_class 957.0 900.0 120.0 36.0]
$node493 setLabel "name" "C_MenuList"
$node493 setProp "is_folded" "1"
$node493 setScope "name" "cl" "scopePhase"

set node495 [$diag addNode cad_class 805.0 1000.0 120.0 36.0]
$node495 setLabel "name" "MenuToggle"
$node495 setProp "is_folded" "1"
$node495 setScope "name" "cl" "scopePhase"

set node497 [$diag addNode cad_class 805.0 900.0 120.0 36.0]
$node497 setLabel "name" "C_MenuToggle"
$node497 setProp "is_folded" "1"
$node497 setScope "name" "cl" "scopePhase"

set node499 [$diag addNode cad_class 881.0 800.0 120.0 36.0]
$node499 setLabel "name" "SimpleMenu"
$node499 setProp "is_folded" "1"
$node499 setScope "name" "cl" "scopePhase"

set node500 [$diag addNode cad_class 881.0 700.0 120.0 36.0]
$node500 setLabel "name" "C_SimpleMenu"
$node500 setProp "is_folded" "1"
$node500 setScope "name" "cl" "scopePhase"

set node502 [$diag addNode cad_class 653.0 1000.0 120.0 36.0]
$node502 setLabel "name" "MenuBar"
$node502 setProp "is_folded" "1"
$node502 setScope "name" "cl" "scopePhase"

set node503 [$diag addNode cad_class 653.0 900.0 120.0 36.0]
$node503 setLabel "name" "C_MenuBar"
$node503 setProp "is_folded" "1"
$node503 setScope "name" "cl" "scopePhase"

set node505 [$diag addNode cad_class 501.0 1200.0 120.0 36.0]
$node505 setLabel "name" "PopupMenu"
$node505 setProp "is_folded" "1"
$node505 setScope "name" "cl" "scopePhase"

set node506 [$diag addNode cad_class 501.0 1100.0 120.0 36.0]
$node506 setLabel "name" "C_PopupMenu"
$node506 setProp "is_folded" "1"
$node506 setScope "name" "cl" "scopePhase"

set node508 [$diag addNode cad_class 349.0 1200.0 120.0 36.0]
$node508 setLabel "name" "Submenu"
$node508 setProp "is_folded" "1"
$node508 setScope "name" "cl" "scopePhase"

set node510 [$diag addNode cad_class 349.0 1100.0 120.0 36.0]
$node510 setLabel "name" "C_Submenu"
$node510 setProp "is_folded" "1"
$node510 setScope "name" "cl" "scopePhase"

set node512 [$diag addNode cad_class 425.0 1000.0 120.0 36.0]
$node512 setLabel "name" "MenuGroup"
$node512 setProp "is_folded" "1"
$node512 setScope "name" "cl" "scopePhase"

set node514 [$diag addNode cad_class 425.0 900.0 120.0 36.0]
$node514 setLabel "name" "C_MenuGroup"
$node514 setProp "is_folded" "1"
$node514 setScope "name" "cl" "scopePhase"

set node516 [$diag addNode cad_class 495.5 800.0 131.0 36.0]
$node516 setLabel "name" "CompoundMenu"
$node516 setProp "is_folded" "1"
$node516 setScope "name" "cl" "scopePhase"

set node518 [$diag addNode cad_class 486.0 700.0 150.0 36.0]
$node518 setLabel "name" "C_CompoundMenu"
$node518 setProp "is_folded" "1"
$node518 setScope "name" "cl" "scopePhase"

set node520 [$diag addNode cad_class 653.0 600.0 120.0 36.0]
$node520 setLabel "name" "VariableMenu"
$node520 setProp "is_folded" "1"
$node520 setScope "name" "cl" "scopePhase"

set node521 [$diag addNode cad_class 648.0 500.0 130.0 36.0]
$node521 setLabel "name" "C_VariableMenu"
$node521 setProp "is_folded" "1"
$node521 setScope "name" "cl" "scopePhase"

set node523 [$diag addNode cad_class 174.0 800.0 124.0 36.0]
$node523 setLabel "name" "MenuCommand"
$node523 setProp "is_folded" "1"
$node523 setScope "name" "cl" "scopePhase"

set node524 [$diag addNode cad_class 174.0 700.0 143.0 36.0]
$node524 setLabel "name" "C_MenuCommand"
$node524 setProp "is_folded" "1"
$node524 setScope "name" "cl" "scopePhase"

set node526 [$diag addNode cad_class 0.0 800.0 123.0 36.0]
$node526 setLabel "name" "MenuSeparator"
$node526 setProp "is_folded" "1"
$node526 setScope "name" "cl" "scopePhase"

set node528 [$diag addNode cad_class 0.0 700.0 142.0 36.0]
$node528 setLabel "name" "C_MenuSeparator"
$node528 setProp "is_folded" "1"
$node528 setScope "name" "cl" "scopePhase"

set node530 [$diag addNode cad_class 98.5 600.0 120.0 36.0]
$node530 setLabel "name" "StaticMenu"
$node530 setProp "is_folded" "1"
$node530 setScope "name" "cl" "scopePhase"

set node532 [$diag addNode cad_class 98.5 500.0 120.0 36.0]
$node532 setLabel "name" "C_StaticMenu"
$node532 setProp "is_folded" "1"
$node532 setScope "name" "cl" "scopePhase"

set node534 [$diag addNode cad_class 478.5 400.0 120.0 36.0]
$node534 setLabel "name" "MenuWidget"
$node534 setProp "is_folded" "1"
$node534 setScope "name" "cl" "scopePhase"

set node536 [$diag addNode cad_class 477.5 300.0 122.0 36.0]
$node536 setLabel "name" "C_MenuWidget"
$node536 setProp "is_folded" "1"
$node536 setScope "name" "cl" "scopePhase"

set node538 [$diag addNode cad_class 1221.0 200.0 120.0 36.0]
$node538 setLabel "name" "Widget"
$node538 setProp "is_folded" "1"
$node538 setScope "name" "cl" "scopePhase"

set node540 [$diag addNode cad_class 1221.0 100.0 120.0 36.0]
$node540 setLabel "name" "C_Widget"
$node540 setProp "is_folded" "1"
$node540 setScope "name" "cl" "scopePhase"

set node541 [$diag addNode cad_class 1308.5 0.0 132.0 36.0]
$node541 setLabel "name" "MappedAttribute"
$node541 setProp "is_folded" "1"
$node541 setScope "name" "cl" "scopePhase"

set node452 [$diag addRake generalization $node455 $node453 1858.5 1136.0 1849.0 1200.0 1168.0]

set conn542 [$node452 getInConn]
set segm543 [$conn542 getFirstSegm]

set conn544 [$node452 getFirstOutConn]
set segm545 [$conn544 getFirstSegm]

set node454 [$diag addRake generalization $node457 $node455 1858.5 1036.0 1858.5 1100.0 1068.0]

set conn546 [$node454 getInConn]
set segm547 [$conn546 getFirstSegm]

set conn548 [$node454 getFirstOutConn]
set segm549 [$conn548 getFirstSegm]

set node456 [$diag addRake generalization $node458 $node457 1858.5 936.0 1858.5 1000.0 968.0]

set conn550 [$node456 getInConn]
set segm551 [$conn550 getFirstSegm]

set conn552 [$node456 getFirstOutConn]
set segm553 [$conn552 getFirstSegm]

set node459 [$diag addRake generalization $node461 $node460 1671.0 1136.0 1671.0 1200.0 1168.0]

set conn554 [$node459 getInConn]
set segm555 [$conn554 getFirstSegm]

set conn556 [$node459 getFirstOutConn]
set segm557 [$conn556 getFirstSegm]

set node462 [$diag addRake generalization $node465 $node463 1519.0 1136.0 1519.0 1200.0 1168.0]

set conn558 [$node462 getInConn]
set segm559 [$conn558 getFirstSegm]

set conn560 [$node462 getFirstOutConn]
set segm561 [$conn560 getFirstSegm]

set node464 [$diag addRake generalization $node467 $node461 1595.0 1036.0 1671.0 1100.0 1068.0]

set conn562 [$node464 getInConn]
set segm563 [$conn562 getFirstSegm]

set conn564 [$node464 getFirstOutConn]
set segm565 [$conn564 getFirstSegm]

set conn566 [$diag addConn generalization_conn $node464 $node465 1519.0 1068.0 1519.0 1100.0]
set segm567 [$conn566 getFirstSegm]

set node466 [$diag addRake generalization $node468 $node467 1595.0 936.0 1595.0 1000.0 968.0]

set conn568 [$node466 getInConn]
set segm569 [$conn568 getFirstSegm]

set conn570 [$node466 getFirstOutConn]
set segm571 [$conn570 getFirstSegm]

set node469 [$diag addRake generalization $node471 $node470 1367.0 1136.0 1367.0 1200.0 1168.0]

set conn572 [$node469 getInConn]
set segm573 [$conn572 getFirstSegm]

set conn574 [$node469 getFirstOutConn]
set segm575 [$conn574 getFirstSegm]

set node472 [$diag addRake generalization $node475 $node473 1192.0 1136.0 1182.5 1200.0 1168.0]

set conn576 [$node472 getInConn]
set segm577 [$conn576 getFirstSegm]

set conn578 [$node472 getFirstOutConn]
set segm579 [$conn578 getFirstSegm]

set node474 [$diag addRake generalization $node477 $node471 1268.0 1036.0 1367.0 1100.0 1068.0]

set conn580 [$node474 getInConn]
set segm581 [$conn580 getFirstSegm]

set conn582 [$node474 getFirstOutConn]
set segm583 [$conn582 getFirstSegm]

set conn584 [$diag addConn generalization_conn $node474 $node475 1192.0 1068.0 1192.0 1100.0]
set segm585 [$conn584 getFirstSegm]

set node476 [$diag addRake generalization $node479 $node477 1268.0 936.0 1268.0 1000.0 968.0]

set conn586 [$node476 getInConn]
set segm587 [$conn586 getFirstSegm]

set conn588 [$node476 getFirstOutConn]
set segm589 [$conn588 getFirstSegm]

set node478 [$diag addRake generalization $node481 $node450 1683.5 836.0 2198.0 900.0 868.0]

set conn590 [$node478 getInConn]
set segm591 [$conn590 getFirstSegm]

set conn592 [$node478 getFirstOutConn]
set segm593 [$conn592 getFirstSegm]

set conn594 [$diag addConn generalization_conn $node478 $node451 2046.0 868.0 2046.0 900.0]
set segm595 [$conn594 getFirstSegm]

set conn596 [$diag addConn generalization_conn $node478 $node458 1858.5 868.0 1858.5 900.0]
set segm597 [$conn596 getFirstSegm]

set conn598 [$diag addConn generalization_conn $node478 $node468 1595.0 868.0 1595.0 900.0]
set segm599 [$conn598 getFirstSegm]

set conn600 [$diag addConn generalization_conn $node478 $node479 1268.0 868.0 1268.0 900.0]
set segm601 [$conn600 getFirstSegm]

set node480 [$diag addRake generalization $node483 $node481 1683.5 736.0 1683.5 800.0 768.0]

set conn602 [$node480 getInConn]
set segm603 [$conn602 getFirstSegm]

set conn604 [$node480 getFirstOutConn]
set segm605 [$conn604 getFirstSegm]

set node482 [$diag addRake generalization $node485 $node449 1759.5 636.0 2350.0 700.0 668.0]

set conn606 [$node482 getInConn]
set segm607 [$conn606 getFirstSegm]

set conn608 [$node482 getFirstOutConn]
set segm609 [$conn608 getFirstSegm]

set conn610 [$diag addConn generalization_conn $node482 $node483 1683.5 668.0 1683.5 700.0]
set segm611 [$conn610 getFirstSegm]

set node484 [$diag addRake generalization $node487 $node485 1759.5 536.0 1759.5 600.0 568.0]

set conn612 [$node484 getInConn]
set segm613 [$conn612 getFirstSegm]

set conn614 [$node484 getFirstOutConn]
set segm615 [$conn614 getFirstSegm]

set node486 [$diag addRake generalization $node489 $node448 1835.5 436.0 2502.0 500.0 468.0]

set conn616 [$node486 getInConn]
set segm617 [$conn616 getFirstSegm]

set conn618 [$node486 getFirstOutConn]
set segm619 [$conn618 getFirstSegm]

set conn620 [$diag addConn generalization_conn $node486 $node487 1759.5 468.0 1759.5 500.0]
set segm621 [$conn620 getFirstSegm]

set node488 [$diag addRake generalization $node490 $node489 1835.5 336.0 1835.5 400.0 368.0]

set conn622 [$node488 getInConn]
set segm623 [$conn622 getFirstSegm]

set conn624 [$node488 getFirstOutConn]
set segm625 [$conn624 getFirstSegm]

set node491 [$diag addRake generalization $node493 $node492 1017.0 936.0 1017.0 1000.0 968.0]

set conn626 [$node491 getInConn]
set segm627 [$conn626 getFirstSegm]

set conn628 [$node491 getFirstOutConn]
set segm629 [$conn628 getFirstSegm]

set node494 [$diag addRake generalization $node497 $node495 865.0 936.0 865.0 1000.0 968.0]

set conn630 [$node494 getInConn]
set segm631 [$conn630 getFirstSegm]

set conn632 [$node494 getFirstOutConn]
set segm633 [$conn632 getFirstSegm]

set node496 [$diag addRake generalization $node499 $node493 941.0 836.0 1017.0 900.0 868.0]

set conn634 [$node496 getInConn]
set segm635 [$conn634 getFirstSegm]

set conn636 [$node496 getFirstOutConn]
set segm637 [$conn636 getFirstSegm]

set conn638 [$diag addConn generalization_conn $node496 $node497 865.0 868.0 865.0 900.0]
set segm639 [$conn638 getFirstSegm]

set node498 [$diag addRake generalization $node500 $node499 941.0 736.0 941.0 800.0 768.0]

set conn640 [$node498 getInConn]
set segm641 [$conn640 getFirstSegm]

set conn642 [$node498 getFirstOutConn]
set segm643 [$conn642 getFirstSegm]

set node501 [$diag addRake generalization $node503 $node502 713.0 936.0 713.0 1000.0 968.0]

set conn644 [$node501 getInConn]
set segm645 [$conn644 getFirstSegm]

set conn646 [$node501 getFirstOutConn]
set segm647 [$conn646 getFirstSegm]

set node504 [$diag addRake generalization $node506 $node505 561.0 1136.0 561.0 1200.0 1168.0]

set conn648 [$node504 getInConn]
set segm649 [$conn648 getFirstSegm]

set conn650 [$node504 getFirstOutConn]
set segm651 [$conn650 getFirstSegm]

set node507 [$diag addRake generalization $node510 $node508 409.0 1136.0 409.0 1200.0 1168.0]

set conn652 [$node507 getInConn]
set segm653 [$conn652 getFirstSegm]

set conn654 [$node507 getFirstOutConn]
set segm655 [$conn654 getFirstSegm]

set node509 [$diag addRake generalization $node512 $node506 485.0 1036.0 561.0 1100.0 1068.0]

set conn656 [$node509 getInConn]
set segm657 [$conn656 getFirstSegm]

set conn658 [$node509 getFirstOutConn]
set segm659 [$conn658 getFirstSegm]

set conn660 [$diag addConn generalization_conn $node509 $node510 409.0 1068.0 409.0 1100.0]
set segm661 [$conn660 getFirstSegm]

set node511 [$diag addRake generalization $node514 $node512 485.0 936.0 485.0 1000.0 968.0]

set conn662 [$node511 getInConn]
set segm663 [$conn662 getFirstSegm]

set conn664 [$node511 getFirstOutConn]
set segm665 [$conn664 getFirstSegm]

set node513 [$diag addRake generalization $node516 $node503 561.0 836.0 713.0 900.0 868.0]

set conn666 [$node513 getInConn]
set segm667 [$conn666 getFirstSegm]

set conn668 [$node513 getFirstOutConn]
set segm669 [$conn668 getFirstSegm]

set conn670 [$diag addConn generalization_conn $node513 $node514 485.0 868.0 485.0 900.0]
set segm671 [$conn670 getFirstSegm]

set node515 [$diag addRake generalization $node518 $node516 561.0 736.0 561.0 800.0 768.0]

set conn672 [$node515 getInConn]
set segm673 [$conn672 getFirstSegm]

set conn674 [$node515 getFirstOutConn]
set segm675 [$conn674 getFirstSegm]

set node517 [$diag addRake generalization $node520 $node500 713.0 636.0 941.0 700.0 668.0]

set conn676 [$node517 getInConn]
set segm677 [$conn676 getFirstSegm]

set conn678 [$node517 getFirstOutConn]
set segm679 [$conn678 getFirstSegm]

set conn680 [$diag addConn generalization_conn $node517 $node518 561.0 668.0 561.0 700.0]
set segm681 [$conn680 getFirstSegm]

set node519 [$diag addRake generalization $node521 $node520 713.0 536.0 713.0 600.0 568.0]

set conn682 [$node519 getInConn]
set segm683 [$conn682 getFirstSegm]

set conn684 [$node519 getFirstOutConn]
set segm685 [$conn684 getFirstSegm]

set node522 [$diag addRake generalization $node524 $node523 245.5 736.0 236.0 800.0 768.0]

set conn686 [$node522 getInConn]
set segm687 [$conn686 getFirstSegm]

set conn688 [$node522 getFirstOutConn]
set segm689 [$conn688 getFirstSegm]

set node525 [$diag addRake generalization $node528 $node526 71.0 736.0 61.5 800.0 768.0]

set conn690 [$node525 getInConn]
set segm691 [$conn690 getFirstSegm]

set conn692 [$node525 getFirstOutConn]
set segm693 [$conn692 getFirstSegm]

set node527 [$diag addRake generalization $node530 $node524 158.5 636.0 245.5 700.0 668.0]

set conn694 [$node527 getInConn]
set segm695 [$conn694 getFirstSegm]

set conn696 [$node527 getFirstOutConn]
set segm697 [$conn696 getFirstSegm]

set conn698 [$diag addConn generalization_conn $node527 $node528 71.0 668.0 71.0 700.0]
set segm699 [$conn698 getFirstSegm]

set node529 [$diag addRake generalization $node532 $node530 158.5 536.0 158.5 600.0 568.0]

set conn700 [$node529 getInConn]
set segm701 [$conn700 getFirstSegm]

set conn702 [$node529 getFirstOutConn]
set segm703 [$conn702 getFirstSegm]

set node531 [$diag addRake generalization $node534 $node521 538.5 436.0 713.0 500.0 468.0]

set conn704 [$node531 getInConn]
set segm705 [$conn704 getFirstSegm]

set conn706 [$node531 getFirstOutConn]
set segm707 [$conn706 getFirstSegm]

set conn708 [$diag addConn generalization_conn $node531 $node532 158.5 468.0 158.5 500.0]
set segm709 [$conn708 getFirstSegm]

set node533 [$diag addRake generalization $node536 $node534 538.5 336.0 538.5 400.0 368.0]

set conn710 [$node533 getInConn]
set segm711 [$conn710 getFirstSegm]

set conn712 [$node533 getFirstOutConn]
set segm713 [$conn712 getFirstSegm]

set node535 [$diag addRake generalization $node538 $node490 1281.0 236.0 1835.5 300.0 268.0]

set conn714 [$node535 getInConn]
set segm715 [$conn714 getFirstSegm]

set conn716 [$node535 getFirstOutConn]
set segm717 [$conn716 getFirstSegm]

set conn718 [$diag addConn generalization_conn $node535 $node536 538.5 268.0 538.5 300.0]
set segm719 [$conn718 getFirstSegm]

set node537 [$diag addRake generalization $node540 $node538 1281.0 136.0 1281.0 200.0 168.0]

set conn720 [$node537 getInConn]
set segm721 [$conn720 getFirstSegm]

set conn722 [$node537 getFirstOutConn]
set segm723 [$conn722 getFirstSegm]

set node539 [$diag addRake generalization $node541 $node447 1374.5 36.0 2671.5 100.0 68.0]

set conn724 [$node539 getInConn]
set segm725 [$conn724 getFirstSegm]

set conn726 [$node539 getFirstOutConn]
set segm727 [$conn726 getFirstSegm]

set conn728 [$diag addConn generalization_conn $node539 $node540 1281.0 68.0 1281.0 100.0]
set segm729 [$conn728 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new dpObjectTree "DisplayProject" "" "" "" "" "" 1 1]

set node8 [$diag addNode cad_class 5095.0 100.0 120.0 36.0]
$node8 setLabel "name" "OleDLL"
$node8 setProp "is_folded" "1"
$node8 setScope "name" "cl" "scopePhase"

set node9 [$diag addNode cad_class 4904.0 100.0 159.0 36.0]
$node9 setLabel "name" "C_PrintOptionsDesc"
$node9 setProp "is_folded" "1"
$node9 setScope "name" "cl" "scopePhase"

set node10 [$diag addNode cad_class 4752.0 100.0 120.0 36.0]
$node10 setLabel "name" "PrintDocument"
$node10 setProp "is_folded" "1"
$node10 setScope "name" "cl" "scopePhase"

set node11 [$diag addNode cad_class 4590.0 100.0 130.0 36.0]
$node11 setLabel "name" "C_OutputDevice"
$node11 setProp "is_folded" "1"
$node11 setScope "name" "cl" "scopePhase"

set node12 [$diag addNode cad_class 4438.0 100.0 120.0 36.0]
$node12 setLabel "name" "Capture"
$node12 setProp "is_folded" "1"
$node12 setScope "name" "cl" "scopePhase"

set node13 [$diag addNode cad_class 4286.0 100.0 120.0 36.0]
$node13 setLabel "name" "Playback"
$node13 setProp "is_folded" "1"
$node13 setScope "name" "cl" "scopePhase"

set node14 [$diag addNode cad_class 4134.0 100.0 120.0 36.0]
$node14 setLabel "name" "AlternateInput"
$node14 setProp "is_folded" "1"
$node14 setScope "name" "cl" "scopePhase"

set node15 [$diag addNode cad_class 3946.0 100.0 156.0 36.0]
$node15 setLabel "name" "TextEngineRecorder"
$node15 setProp "is_folded" "1"
$node15 setScope "name" "cl" "scopePhase"

set node16 [$diag addNode cad_class 3791.0 100.0 123.0 36.0]
$node16 setLabel "name" "C_ImageEngine"
$node16 setProp "is_folded" "1"
$node16 setScope "name" "cl" "scopePhase"

set node17 [$diag addNode cad_class 3638.0 100.0 121.0 36.0]
$node17 setLabel "name" "C_ColorPalette"
$node17 setProp "is_folded" "1"
$node17 setScope "name" "cl" "scopePhase"

set node18 [$diag addNode cad_class 3486.0 100.0 120.0 36.0]
$node18 setLabel "name" "C_TextEngine"
$node18 setProp "is_folded" "1"
$node18 setScope "name" "cl" "scopePhase"

set node19 [$diag addNode cad_class 3334.0 100.0 120.0 36.0]
$node19 setLabel "name" "Capsule"
$node19 setProp "is_folded" "1"
$node19 setScope "name" "cl" "scopePhase"

set node20 [$diag addNode cad_class 3182.0 100.0 120.0 36.0]
$node20 setLabel "name" "Recorder"
$node20 setProp "is_folded" "1"
$node20 setScope "name" "cl" "scopePhase"

set node21 [$diag addNode cad_class 3030.0 100.0 120.0 36.0]
$node21 setLabel "name" "Event"
$node21 setProp "is_folded" "1"
$node21 setScope "name" "cl" "scopePhase"

set node22 [$diag addNode cad_class 2878.0 100.0 120.0 36.0]
$node22 setLabel "name" "DataPoint"
$node22 setProp "is_folded" "1"
$node22 setScope "name" "cl" "scopePhase"

set node23 [$diag addNode cad_class 2726.0 100.0 120.0 36.0]
$node23 setLabel "name" "C_ImageData"
$node23 setProp "is_folded" "1"
$node23 setScope "name" "cl" "scopePhase"

set node24 [$diag addNode cad_class 2574.0 100.0 120.0 36.0]
$node24 setLabel "name" "C_SnapShot"
$node24 setProp "is_folded" "1"
$node24 setScope "name" "cl" "scopePhase"

set node25 [$diag addNode cad_class 2338.0 300.0 204.0 36.0]
$node25 setLabel "name" "C_ExtendedFontDescriptor"
$node25 setProp "is_folded" "1"
$node25 setScope "name" "cl" "scopePhase"

set node26 [$diag addNode cad_class 2115.0 300.0 191.0 36.0]
$node26 setLabel "name" "C_SystemFontDescriptor"
$node26 setProp "is_folded" "1"
$node26 setScope "name" "cl" "scopePhase"

set node28 [$diag addNode cad_class 1884.0 300.0 199.0 36.0]
$node28 setLabel "name" "C_PortableFontDescriptor"
$node28 setProp "is_folded" "1"
$node28 setScope "name" "cl" "scopePhase"

set node30 [$diag addNode cad_class 2152.5 200.0 121.0 36.0]
$node30 setLabel "name" "FontDescriptor"
$node30 setProp "is_folded" "1"
$node30 setScope "name" "cl" "scopePhase"

set node31 [$diag addNode cad_class 2143.0 100.0 140.0 36.0]
$node31 setLabel "name" "C_FontDescriptor"
$node31 setProp "is_folded" "1"
$node31 setScope "name" "cl" "scopePhase"

set node33 [$diag addNode cad_class 1732.0 200.0 120.0 36.0]
$node33 setLabel "name" "Font"
$node33 setProp "is_folded" "1"
$node33 setScope "name" "cl" "scopePhase"

set node34 [$diag addNode cad_class 1732.0 100.0 120.0 36.0]
$node34 setLabel "name" "C_Font"
$node34 setProp "is_folded" "1"
$node34 setScope "name" "cl" "scopePhase"

set node36 [$diag addNode cad_class 1559.0 400.0 122.0 36.0]
$node36 setLabel "name" "MessageDialog"
$node36 setProp "is_folded" "1"
$node36 setScope "name" "cl" "scopePhase"

set node37 [$diag addNode cad_class 1559.0 300.0 141.0 36.0]
$node37 setLabel "name" "C_MessageDialog"
$node37 setProp "is_folded" "1"
$node37 setScope "name" "cl" "scopePhase"

set node39 [$diag addNode cad_class 1358.0 600.0 150.0 36.0]
$node39 setLabel "name" "FileSelectionDialog"
$node39 setProp "is_folded" "1"
$node39 setScope "name" "cl" "scopePhase"

set node40 [$diag addNode cad_class 1358.0 500.0 169.0 36.0]
$node40 setLabel "name" "C_FileSelectionDialog"
$node40 setProp "is_folded" "1"
$node40 setScope "name" "cl" "scopePhase"

set node42 [$diag addNode cad_class 1183.0 600.0 124.0 36.0]
$node42 setLabel "name" "QuestionDialog"
$node42 setProp "is_folded" "1"
$node42 setScope "name" "cl" "scopePhase"

set node44 [$diag addNode cad_class 1183.0 500.0 143.0 36.0]
$node44 setLabel "name" "C_QuestionDialog"
$node44 setProp "is_folded" "1"
$node44 setScope "name" "cl" "scopePhase"

set node46 [$diag addNode cad_class 1295.0 400.0 120.0 36.0]
$node46 setLabel "name" "PromptDialog"
$node46 setProp "is_folded" "1"
$node46 setScope "name" "cl" "scopePhase"

set node48 [$diag addNode cad_class 1290.0 300.0 130.0 36.0]
$node48 setLabel "name" "C_PromptDialog"
$node48 setProp "is_folded" "1"
$node48 setScope "name" "cl" "scopePhase"

set node50 [$diag addNode cad_class 1381.5 200.0 120.0 36.0]
$node50 setLabel "name" "DialogWindow"
$node50 setProp "is_folded" "1"
$node50 setScope "name" "cl" "scopePhase"

set node51 [$diag addNode cad_class 1374.5 100.0 134.0 36.0]
$node51 setLabel "name" "C_DialogWindow"
$node51 setProp "is_folded" "1"
$node51 setScope "name" "cl" "scopePhase"

set node53 [$diag addNode cad_class 1031.0 400.0 120.0 36.0]
$node53 setLabel "name" "GhostLine"
$node53 setProp "is_folded" "1"
$node53 setScope "name" "cl" "scopePhase"

set node54 [$diag addNode cad_class 1031.0 300.0 120.0 36.0]
$node54 setLabel "name" "C_GhostLine"
$node54 setProp "is_folded" "1"
$node54 setScope "name" "cl" "scopePhase"

set node56 [$diag addNode cad_class 853.0 400.0 127.0 36.0]
$node56 setLabel "name" "GhostRectangle"
$node56 setProp "is_folded" "1"
$node56 setScope "name" "cl" "scopePhase"

set node58 [$diag addNode cad_class 853.0 300.0 146.0 36.0]
$node58 setLabel "name" "C_GhostRectangle"
$node58 setProp "is_folded" "1"
$node58 setScope "name" "cl" "scopePhase"

set node60 [$diag addNode cad_class 942.0 200.0 120.0 36.0]
$node60 setLabel "name" "Ghost"
$node60 setProp "is_folded" "1"
$node60 setScope "name" "cl" "scopePhase"

set node61 [$diag addNode cad_class 942.0 100.0 120.0 36.0]
$node61 setLabel "name" "C_Ghost"
$node61 setProp "is_folded" "1"
$node61 setScope "name" "cl" "scopePhase"

set node62 [$diag addNode cad_class 678.0 100.0 143.0 36.0]
$node62 setLabel "name" "ColumnDescriptor"
$node62 setProp "is_folded" "1"
$node62 setScope "name" "cl" "scopePhase"

set node63 [$diag addNode cad_class 503.0 100.0 143.0 36.0]
$node63 setLabel "name" "RowColDescriptor"
$node63 setProp "is_folded" "1"
$node63 setScope "name" "cl" "scopePhase"

set node64 [$diag addNode cad_class 304.0 100.0 167.0 36.0]
$node64 setLabel "name" "WindowManagerHints"
$node64 setProp "is_folded" "1"
$node64 setScope "name" "cl" "scopePhase"

set node65 [$diag addNode cad_class 152.0 100.0 120.0 36.0]
$node65 setLabel "name" "Image"
$node65 setProp "is_folded" "1"
$node65 setScope "name" "cl" "scopePhase"

set node67 [$diag addNode cad_class 0.0 100.0 120.0 36.0]
$node67 setLabel "name" "EditScope"
$node67 setProp "is_folded" "1"
$node67 setScope "name" "cl" "scopePhase"

set node68 [$diag addNode cad_class 2547.5 0.0 120.0 36.0]
$node68 setLabel "name" "Object"
$node68 setProp "is_folded" "1"
$node68 setScope "name" "cl" "scopePhase"

set node27 [$diag addRake generalization $node30 $node25 2213.0 236.0 2440.0 300.0 268.0]

set conn69 [$node27 getInConn]
set segm70 [$conn69 getFirstSegm]

set conn71 [$node27 getFirstOutConn]
set segm72 [$conn71 getFirstSegm]

set conn73 [$diag addConn generalization_conn $node27 $node26 2210.5 268.0 2210.5 300.0]
set segm74 [$conn73 getFirstSegm]

set conn75 [$diag addConn generalization_conn $node27 $node28 1983.5 268.0 1983.5 300.0]
set segm76 [$conn75 getFirstSegm]

set node29 [$diag addRake generalization $node31 $node30 2213.0 136.0 2213.0 200.0 168.0]

set conn77 [$node29 getInConn]
set segm78 [$conn77 getFirstSegm]

set conn79 [$node29 getFirstOutConn]
set segm80 [$conn79 getFirstSegm]

set node32 [$diag addRake generalization $node34 $node33 1792.0 136.0 1792.0 200.0 168.0]

set conn81 [$node32 getInConn]
set segm82 [$conn81 getFirstSegm]

set conn83 [$node32 getFirstOutConn]
set segm84 [$conn83 getFirstSegm]

set node35 [$diag addRake generalization $node37 $node36 1629.5 336.0 1620.0 400.0 368.0]

set conn85 [$node35 getInConn]
set segm86 [$conn85 getFirstSegm]

set conn87 [$node35 getFirstOutConn]
set segm88 [$conn87 getFirstSegm]

set node38 [$diag addRake generalization $node40 $node39 1442.5 536.0 1433.0 600.0 568.0]

set conn89 [$node38 getInConn]
set segm90 [$conn89 getFirstSegm]

set conn91 [$node38 getFirstOutConn]
set segm92 [$conn91 getFirstSegm]

set node41 [$diag addRake generalization $node44 $node42 1254.5 536.0 1245.0 600.0 568.0]

set conn93 [$node41 getInConn]
set segm94 [$conn93 getFirstSegm]

set conn95 [$node41 getFirstOutConn]
set segm96 [$conn95 getFirstSegm]

set node43 [$diag addRake generalization $node46 $node40 1355.0 436.0 1442.5 500.0 468.0]

set conn97 [$node43 getInConn]
set segm98 [$conn97 getFirstSegm]

set conn99 [$node43 getFirstOutConn]
set segm100 [$conn99 getFirstSegm]

set conn101 [$diag addConn generalization_conn $node43 $node44 1254.5 468.0 1254.5 500.0]
set segm102 [$conn101 getFirstSegm]

set node45 [$diag addRake generalization $node48 $node46 1355.0 336.0 1355.0 400.0 368.0]

set conn103 [$node45 getInConn]
set segm104 [$conn103 getFirstSegm]

set conn105 [$node45 getFirstOutConn]
set segm106 [$conn105 getFirstSegm]

set node47 [$diag addRake generalization $node50 $node37 1441.5 236.0 1629.5 300.0 268.0]

set conn107 [$node47 getInConn]
set segm108 [$conn107 getFirstSegm]

set conn109 [$node47 getFirstOutConn]
set segm110 [$conn109 getFirstSegm]

set conn111 [$diag addConn generalization_conn $node47 $node48 1355.0 268.0 1355.0 300.0]
set segm112 [$conn111 getFirstSegm]

set node49 [$diag addRake generalization $node51 $node50 1441.5 136.0 1441.5 200.0 168.0]

set conn113 [$node49 getInConn]
set segm114 [$conn113 getFirstSegm]

set conn115 [$node49 getFirstOutConn]
set segm116 [$conn115 getFirstSegm]

set node52 [$diag addRake generalization $node54 $node53 1091.0 336.0 1091.0 400.0 368.0]

set conn117 [$node52 getInConn]
set segm118 [$conn117 getFirstSegm]

set conn119 [$node52 getFirstOutConn]
set segm120 [$conn119 getFirstSegm]

set node55 [$diag addRake generalization $node58 $node56 926.0 336.0 916.5 400.0 368.0]

set conn121 [$node55 getInConn]
set segm122 [$conn121 getFirstSegm]

set conn123 [$node55 getFirstOutConn]
set segm124 [$conn123 getFirstSegm]

set node57 [$diag addRake generalization $node60 $node54 1002.0 236.0 1091.0 300.0 268.0]

set conn125 [$node57 getInConn]
set segm126 [$conn125 getFirstSegm]

set conn127 [$node57 getFirstOutConn]
set segm128 [$conn127 getFirstSegm]

set conn129 [$diag addConn generalization_conn $node57 $node58 926.0 268.0 926.0 300.0]
set segm130 [$conn129 getFirstSegm]

set node59 [$diag addRake generalization $node61 $node60 1002.0 136.0 1002.0 200.0 168.0]

set conn131 [$node59 getInConn]
set segm132 [$conn131 getFirstSegm]

set conn133 [$node59 getFirstOutConn]
set segm134 [$conn133 getFirstSegm]

set node66 [$diag addRake generalization $node68 $node8 2607.5 36.0 5155.0 100.0 68.0]

set conn135 [$node66 getInConn]
set segm136 [$conn135 getFirstSegm]

set conn137 [$node66 getFirstOutConn]
set segm138 [$conn137 getFirstSegm]

set conn139 [$diag addConn generalization_conn $node66 $node9 4983.5 68.0 4983.5 100.0]
set segm140 [$conn139 getFirstSegm]

set conn141 [$diag addConn generalization_conn $node66 $node10 4812.0 68.0 4812.0 100.0]
set segm142 [$conn141 getFirstSegm]

set conn143 [$diag addConn generalization_conn $node66 $node11 4655.0 68.0 4655.0 100.0]
set segm144 [$conn143 getFirstSegm]

set conn145 [$diag addConn generalization_conn $node66 $node12 4498.0 68.0 4498.0 100.0]
set segm146 [$conn145 getFirstSegm]

set conn147 [$diag addConn generalization_conn $node66 $node13 4346.0 68.0 4346.0 100.0]
set segm148 [$conn147 getFirstSegm]

set conn149 [$diag addConn generalization_conn $node66 $node14 4194.0 68.0 4194.0 100.0]
set segm150 [$conn149 getFirstSegm]

set conn151 [$diag addConn generalization_conn $node66 $node15 4024.0 68.0 4024.0 100.0]
set segm152 [$conn151 getFirstSegm]

set conn153 [$diag addConn generalization_conn $node66 $node16 3852.5 68.0 3852.5 100.0]
set segm154 [$conn153 getFirstSegm]

set conn155 [$diag addConn generalization_conn $node66 $node17 3698.5 68.0 3698.5 100.0]
set segm156 [$conn155 getFirstSegm]

set conn157 [$diag addConn generalization_conn $node66 $node18 3546.0 68.0 3546.0 100.0]
set segm158 [$conn157 getFirstSegm]

set conn159 [$diag addConn generalization_conn $node66 $node19 3394.0 68.0 3394.0 100.0]
set segm160 [$conn159 getFirstSegm]

set conn161 [$diag addConn generalization_conn $node66 $node20 3242.0 68.0 3242.0 100.0]
set segm162 [$conn161 getFirstSegm]

set conn163 [$diag addConn generalization_conn $node66 $node21 3090.0 68.0 3090.0 100.0]
set segm164 [$conn163 getFirstSegm]

set conn165 [$diag addConn generalization_conn $node66 $node22 2938.0 68.0 2938.0 100.0]
set segm166 [$conn165 getFirstSegm]

set conn167 [$diag addConn generalization_conn $node66 $node23 2786.0 68.0 2786.0 100.0]
set segm168 [$conn167 getFirstSegm]

set conn169 [$diag addConn generalization_conn $node66 $node24 2634.0 68.0 2634.0 100.0]
set segm170 [$conn169 getFirstSegm]

set conn171 [$diag addConn generalization_conn $node66 $node31 2213.0 68.0 2213.0 100.0]
set segm172 [$conn171 getFirstSegm]

set conn173 [$diag addConn generalization_conn $node66 $node34 1792.0 68.0 1792.0 100.0]
set segm174 [$conn173 getFirstSegm]

set conn175 [$diag addConn generalization_conn $node66 $node51 1441.5 68.0 1441.5 100.0]
set segm176 [$conn175 getFirstSegm]

set conn177 [$diag addConn generalization_conn $node66 $node61 1002.0 68.0 1002.0 100.0]
set segm178 [$conn177 getFirstSegm]

set conn179 [$diag addConn generalization_conn $node66 $node62 749.5 68.0 749.5 100.0]
set segm180 [$conn179 getFirstSegm]

set conn181 [$diag addConn generalization_conn $node66 $node63 574.5 68.0 574.5 100.0]
set segm182 [$conn181 getFirstSegm]

set conn183 [$diag addConn generalization_conn $node66 $node64 387.5 68.0 387.5 100.0]
set segm184 [$conn183 getFirstSegm]

set conn185 [$diag addConn generalization_conn $node66 $node65 212.0 68.0 212.0 100.0]
set segm186 [$conn185 getFirstSegm]

set conn187 [$diag addConn generalization_conn $node66 $node67 60.0 68.0 60.0 100.0]
set segm188 [$conn187 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new OperatingEnvironmentTree "DisplayProject" "" "" "" "" "" 1 1]

set node1029 [$diag addNode cad_class 0.0 200.0 121.0 36.0]
$node1029 setLabel "name" "WindowSystem"
$node1029 setProp "is_folded" "1"
$node1029 setScope "name" "cl" "scopePhase"

set node1031 [$diag addNode cad_class 0.0 100.0 140.0 36.0]
$node1031 setLabel "name" "C_WindowSystem"
$node1031 setProp "is_folded" "1"
$node1031 setScope "name" "cl" "scopePhase"

set node1032 [$diag addNode cad_class 0.0 0.0 173.0 36.0]
$node1032 setLabel "name" "OperatingEnvironment"
$node1032 setProp "is_folded" "1"
$node1032 setScope "name" "cl" "scopePhase"

set node1028 [$diag addRake generalization $node1031 $node1029 70.0 136.0 60.5 200.0 168.0]

set conn1033 [$node1028 getInConn]
set segm1034 [$conn1033 getFirstSegm]

set conn1035 [$node1028 getFirstOutConn]
set segm1036 [$conn1035 getFirstSegm]

set node1030 [$diag addRake generalization $node1032 $node1031 86.5 36.0 70.0 100.0 68.0]

set conn1037 [$node1030 getInConn]
set segm1038 [$conn1037 getFirstSegm]

set conn1039 [$node1030 getFirstOutConn]
set segm1040 [$conn1039 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}


set msg ""
if {[catch {
set diag ""
set diag [CAD new dpSystemResourceTree "DisplayProject" "" "" "" "" "" 1 1]

set node1365 [$diag addNode cad_class 0.0 100.0 159.0 36.0]
$node1365 setLabel "name" "C_PrintOptionsDesc"
$node1365 setProp "is_folded" "1"
$node1365 setScope "name" "cl" "scopePhase"

set node1366 [$diag addNode cad_class 13.0 0.0 133.0 36.0]
$node1366 setLabel "name" "SystemResource"
$node1366 setProp "is_folded" "1"
$node1366 setScope "name" "cl" "scopePhase"

set node1364 [$diag addRake generalization $node1366 $node1365 79.5 36.0 79.5 100.0 68.0]

set conn1367 [$node1364 getInConn]
set segm1368 [$conn1367 getFirstSegm]

set conn1369 [$node1364 getFirstOutConn]
set segm1370 [$conn1369 getFirstSegm]

$diag save
} msg]} {
    puts stderr "\nAn error occurred while importing"
    puts stderr $msg
}