home *** CD-ROM | disk | FTP | other *** search
- #=============================================================================
- # STATUS MESSAGE [NOT ERROR] (GROUP = 0)
- #=============================================================================
- # No. Handler
- #-----------------------------------------------------------------------------
- # 0 IDI_READY
- # 1 IDI_WARMUP
- # 2 IDI_PWROFF
- # 3 IDI_IDLE
- # 4 IDI_JAM
- # 5 IDI_CHANGE
- # 6 IDI_COVEROPEN
- # 7 IDI_MISSING
- # 8 IDI_OVERRUN
- # 9 IDI_PAPEROUT
- # 10 IDI_SERVICE
- #=============================================================================
- <CODE> 10001
- <GROP> 0
- <ICON> 0
- <STAT> Ready for printing.
- <RCVR>
-
- <CODE> 10002
- <GROP> 0
- <ICON> 0
- <STAT> Printing remaining data.
- <RCVR>
-
- <CODE> 10003
- <GROP> 0
- <ICON> 1
- <STAT> Warming up.
- <RCVR>
-
- <CODE> 10014
- <GROP> 0
- <ICON> 0
- <STAT> Printer is printing SELFTEST PAGE.
- <RCVR>
-
- <CODE> 10017
- <GROP> 0
- <ICON> 0
- <STAT> Printer is printing DEMONSTRATION PAGE.
- <RCVR>
-
- <CODE> 40000
- <GROP> 0
- <ICON> 3
- <STAT> POWER SAVE MODE.
- <RCVR>
-
- #=============================================================================
- # USER ERROR (GROUP = 1)
- #=============================================================================
-
- <CODE> 40022
- <GROP> 1
- <ICON> 4
- <STAT> Output Tray Not Open or Paper Jam
- <RCVR> 1. Open the Top Cover, if Top Cover is closed.
- 2. Open the Left cover and remove the jammed \
- paper in the paper ejection area or transfer area.
-
- (!) Don't touch the green surface of Drum.
-
- <CODE> 41000
- <GROP> 1
- <ICON> 9
- <STAT> Paper Out or Misfeed
- <RCVR> 1. Add paper with the front side up, if paper out.
- 2. Put it right, if misfeed.
- 3. Push PRINT/RESET key on the printer.
-
- <CODE> 40010
- <GROP> 1
- <ICON> 7
- <STAT> Process Unit is not installed.
- <RCVR> Install the Process Unit.
-
- <CODE> 40558
- <GROP> 1
- <ICON> 5
- <STAT> The life cycle of the Process Unit has expired.
- <RCVR> Install a new Process Unit when the toner supply is depleted.
- ( See Manual of Process Unit. )
-
- <CODE> 40021
- <GROP> 1
- <ICON> 6
- <STAT> Left Cover Open
- <RCVR> Close Left Cover.
-
- <CODE> 30016
- <GROP> 1
- <ICON> 8
- <STAT> RAM Overflow has occurred.
- <RCVR> Press PRINT/RESET key on the printer.
-
- If you want to get right print, install option RAM board:
-
- <CODE> 30017
- <GROP> 1
- <ICON> 8
- <STAT> Overrun has occurred.
- <RCVR> Press PRINT/RESET key on the printer.
-
- #=============================================================================
- # SERVICE ERROR (GROUP = 2)
- #=============================================================================
-
- <CODE> 50001
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E54)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 50551
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E56)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 50002
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E50)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 50550
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E51)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 50003
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E30)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 50553
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E31)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 50007
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E62)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 50005
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E20)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 50554
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E35)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 30036
- <GROP> 2
- <ICON> 10
- <STAT> Call Service (Code:E71)
- <RCVR> 1. Turn the power off for a few second then on again.
- 2. If the error continues, service by an Panasonic \
- Service Centre is required.
-
- <CODE> 0
- # CODE 0 means the end of status.msg
- ##############################################################################
- # for KX-P6150 - English
- ##############################################################################
-