home *** CD-ROM | disk | FTP | other *** search
/ PC World 1997 November / PCWorld_1997-11_cd.bin / hardware / ovladace / Sit / 3com / edisk / 3c562x.exe / AUTOLINK / AUTOLINK.CFG next >
Text File  |  1996-10-12  |  8KB  |  161 lines
  1. ;                               
  2. ;                             3Com Corporation
  3. ;                     Configuring the AUTOLINK.CFG File
  4. ;
  5. ; The AutoLink configuration file (AUTOLINK.CFG) lets you customize your 
  6. ; AutoLink installations.  Each of the parameters are defined below.
  7. ; Read the option description for each parameter.
  8.  
  9.  
  10. ;    KEYWORD        DEFAULT  VALUE                  DESCRIPTION
  11. ; =============     ==============       =============================    
  12.  
  13. WINDOWS_VERSION                          ; Option: [WFW311|WIN31X]
  14.                                    ;
  15.                                    ; Installs windows support for Netware
  16.                                    ; networks on either Windows for 
  17.                                    ; Workgroups (if WFW311) or Windows 3.1x 
  18.                                    ; (if WIN31X). If this option is set then
  19.                                    ; the WINDOWS_DIRECTORY option must also 
  20.                                    ; be set.  If this option is not set then
  21.                                    ; Autolink will setup a DOS client only.
  22.                                    
  23.                                    
  24. WINDOWS_DIRECTORY                  ; Option: Full path, including drive, of
  25.                                    ; the windows system that Autolink will
  26.                                    ; set up Netware support for.  To us this
  27.                                    ; option you MUST specify what type of 
  28.                                    ; windows you are running in that directory
  29.                                    ; in the WINDOWS_VERSION option above. 
  30.  
  31.  
  32. CREATE_LOG_FILE          YES       ; Option: [Yes|No]  
  33.                                    ;
  34.                                    ; Creates the file C:\AUTOLINK.LOG
  35.                                    ; which contains information generated 
  36.                                    ; by AutoLink.
  37.  
  38.  
  39. RUN_DIAGNOSTICS          NO        ; Option: [Yes|No]  
  40.                                    ;
  41.                                    ; The Group 1 Diagnostic tests check 
  42.                                    ; the adapter's physical components
  43.                                    ; and circuitry during the AutoLink
  44.                                    ; installation.
  45.  
  46.  
  47. AUTO_CONFIGURE           YES       ; Option: [Yes|No]  
  48.                                    ;                       
  49.                                    ; Automatically configures the Media  
  50.                                    ; Type Setting.
  51.  
  52.  
  53. CONFIGURATION_FILE                 ; Option: Path & Name of a configuration  
  54.                                    ; file.
  55.                                    ; This optional file configures the
  56.                                    ; adapter with the parameters saved in a
  57.                                    ; configuration file.  
  58.                                    ; (ex. C:\3C59X.SET).  
  59.                                    ; For more information or to create 
  60.                                    ; the configuration file, refer to the 
  61.                                    ; Configuration and Diagnostic Program.
  62.                                    ; Note: For this option to be activated,
  63.                                    ; type in the configuration file path &
  64.                                    ; name, and set AUTO_CONFIGURE to YES.
  65.  
  66.  
  67. EDIT_CONFIG.SYS          YES       ; Option: [Yes|No]
  68.                                    ;
  69.                                    ; YES edits C:\CONFIG.SYS and saves
  70.                                    ; the original file to C:\CONFIG.3CM. 
  71.                                    ;
  72.                                    ; NO does not change C:\CONFIG.SYS. 
  73.                                    ; You need to manually edit the file.
  74.  
  75.  
  76. EDIT_AUTOEXEC.BAT        YES       ; Option: [Yes|No]  
  77.                                    ;
  78.                                    ; YES edits C:\AUTOEXEC.BAT and saves 
  79.                                    ; the original file to C:\AUTOEXEC.3CM.
  80.                                    ;
  81.                                    ; NO does not change C:\AUTOEXEC.BAT.
  82.                                    ; You need to manually edit the file.
  83.  
  84.  
  85. EDIT_NET.CFG             YES       ; Option: [Yes|No] 
  86.                                    ;
  87.                                    ; YES edits NET.CFG and saves the 
  88.                                    ; original file to NET.3CM.  
  89.                                    ;
  90.                                    ; NO does not change NET.CFG.  You
  91.                                    ; need to manually edit the file.
  92.  
  93.  
  94. SMARTAGENT_INFO          YES       ; Option: [Yes|No] 
  95.                                    ;
  96.                                    ; Adds the Transcend SmartAgent section 
  97.                                    ; into the NET.CFG file.  The Transcend 
  98.                                    ; SmartAgent software is already 
  99.                                    ; incorporated into the NetWare ODI
  100.                                    ; driver.  Adding the SmartAgent section
  101.                                    ; into NET.CFG lets the management
  102.                                    ; information be customized for 
  103.                                    ; each user.
  104.  
  105.  
  106. 3INSTALL_FRAME_TYPE                ; Options:  Ethernet_802.2
  107.                                    ;           Ethernet_802.3
  108.                                    ;           Ethernet_II
  109.                                    ;           Ethernet_SNAP
  110.                                    ;     
  111.                                    ; Default = AutoDetects 802.2 & 802.3
  112.                                    ;
  113.                                    ; This parameter defines the frame 
  114.                                    ; type that AutoLink will use to connect
  115.                                    ; to the 3INSTALL account on the server.
  116.                                    ; If no value is specified, Autolink
  117.                                    ; will first attempt to connect using
  118.                                    ; Ethernet_802.2 and then Ethernet_802.3.
  119.  
  120.  
  121. TARGET_DIRECTORY    C:\NWCLIENT    ; Options:  Any designated directory.
  122.                                    ;
  123.                                    ; AutoLink searches C:\AUTOEXEC.BAT for
  124.                                    ; an existing NetWare installation.
  125.                                    ; If no existing NetWare installation is 
  126.                                    ; detected, AutoLink copies the NetWare  
  127.                                    ; client software to the target
  128.                                    ; directory.  If AutoLink finds an    
  129.                                    ; existing NetWare client installation, 
  130.                                    ; AutoLink will install to that directory 
  131.                                    ; and this path will NOT be used.  
  132.  
  133.  
  134. CONNECT_TO_SERVER        YES       ; Option: [Yes|No]
  135.                                    ;
  136.                                    ; YES connects AutoLink to a server, and 
  137.                                    ; allows AutoLink to detect the frame type.
  138.                                    ; If AutoLink finds a server, it looks for
  139.                                    ; the file 3INSTALL.BAT in the LOGIN 
  140.                                    ; directory of the server.  If AutoLink finds 
  141.                                    ; the file 3INSTALL.BAT it spawns it.
  142.                                    ;
  143.                                    ; NO installs the NetWare client software from
  144.                                    ; this diskette and does NOT look for a server. 
  145.                                    ; For information on the 3INSTALL.BAT file 
  146.                                    ; read: 
  147.                                    ; A:\AUTOLINK\AUTOLINK.TXT.
  148.  
  149.  
  150. PREFERRED_SERVER                   ; No Default
  151.                                    ;
  152.                                    ; Preferred server identifies which NetWare
  153.                                    ; Server (2.x, 3.x or 4.x) has the 
  154.                                    ; 3INSTALL.BAT file. 
  155.  
  156.  
  157. LOCATE_NIC               NO        ; DO NOT CHANGE THIS OPTION
  158.                                    
  159. ; %VER ETHER autolink.cfg v1.0b
  160.  
  161.