104 Cannot simulate with this type of disc.\nPlease use the Create Data Disc function to measure the write performance.
105 Error erasing disc.
106 Error formatting disc.
107 &Start
108 &Stop
109 Error initializing test.
110 Error
111 not tested
112 (with this recorder)
113 Seek times
114 Access times
115 Unable to initialize WNASPI32.DLL
116 No CD-ROM drives found.
117 Current
118 Creating Data Disc
119 Verifying Data Disc
120 Starting write transfer rate test
121 Overburning enabled
122 Starting transfer rate test
123 Starting DAE quality test
124 Starting seek times test
125 Starting access times test
126 Starting CPU usage test
127 Starting burst rate test
128 Starting spin-up/down test
129 Starting load/eject test
130 Total errors
131 DAE Quality
132 Accurate Stream
133 Yes
134 No
135 Seek
136 Access
137 CPU usage at
138 Interface burst rate
139 Spin-up time
140 Spin-down time
141 Eject time
142 Load time
143 Recognition time
144 Incorrect disc inserted
145 Canceled by user
146 Average
147 average
148 Speed
149 errors detected
150 No errors found
151 Elapsed Time
152 No Audio CD inserted
153 Error saving file
154 Invalid file
155 Test results loaded
156 Error creating file
157 Error writing file
158 Read error
159 Incorrect CRC
160 Extraction completed successfully
161 no test disc inserted
162 Warning!\nThe Test Capacity is less than the official capacity.\nDo you want to continue?
163 Warning!\nMost recorders are unable to write more than 90 minutes.\nDo you want to continue?
164 Writing stopped.\nMaximum capacity: %s (+%s)\nDo you want to add the results to the CD-R(W) list?
165 Entry already exists.\nOverwrite?
166 This drive does not seem capable of writing CD Text\nContinue?
167 Writing stopped without an error.\nUse a larger value of the maximum capacity.
168 DAE Test disc creation successfully simulated
169 DAE Test disc successfully created
170 Are you sure you want to delete this entry?
171 audio
172 data
173 Good
174 Damaged
175 Unreadable
176 Not tested
177 Not used
178 Error opening %s
179 Error reading %s
180 Warning!\nThe drive is unable to report damaged sectors.
181 Starting surface scan
182 Errors
183 Directories
184 Size
185 File test completed
186 Surface scan completed
187 Starting file test
188 Files
189 Test
190 Track
191 Relative position
192 Absolute position
193 Index
194 Offset
195 %d bytes (%d samples)
196 Sequential Read Test
197 Random Read Test
198 On The Fly Copying Simulation
199 Copying at %d x
200 too slow
201 Sync errors
202 Data errors
203 OK
204 CD Text
205 Subchannel Data
206 Lead-out
207 Lead-in
208 Sync error at %s (%s%d)
209 Average Speed
210 Average Access Time
211 Total Data Errors
212 Total Sync Errors
213 Quality Score
214 Drive cannot read data from the Lead-in
215 Drive can read max. %d sectors (-%s) from the Lead-in
216 Drive cannot read data from the Lead-out
217 Drive can read max. %d sectors (-%s) from the Lead-out
218 Drive is capable of reading CD Text information
219 Drive cannot read CD Text information
220 Drive cannot read Subchannel Data directly
221 Test completed
222 compare errors
223 C2 errors
224 unknown
225 Error opening file
226 Error reading file
227 Drive %s is locked by %s.
228 No blank disc inserted.
229 No defect management will be performed which may cause playback problems.
230 Disc capacity too small.
231 Advanced Disc Quality
232 Drive Info
233 TA Jitter
28416 The help file cannot be opened: %1!s!
28417 No Help topic is associated with this item.
28418 The license you are currently using does not allow you to start this application
28419 Your demo version has expired!
28420 This version of the application cannot be run in this language. Please visit our Web site at www.nero.com to purchase an unlimited serial number.
28421 Nero has detected an attempt at non-licensed usage. Please purchase a license from us for full and unrestricted access of Nero and its components. Your purchase contributes to the development of more exciting and innovative products and we thank you for your continued support.\n\nYou can buy Nero directly from our online shop or from an appointed reseller.
28423 No help file is available in the current language. The English help file will be used instead.\n\nNote:\nAlthough the user interface of this application is available in many languages, we cannot provide help files for all of them.\nVisit <a weblinkid=19>our support pages</a> for more information about manuals and help files.
57344 CDSpeed
57345 Standard Tests
57346 Transfer Rate
57347 Access/Seek Times
57348 Save
57349 Autorun
57350 Manufacturer
57351 Type
57352 Capacity
57353 Maximum
57354 Extra
57355 Erasing Disc
57356 Synchronization error. Please select a lower speed and run the test again.
57357 Extra Tests
57358 Disc Quality
57359 Software\ahead\Nero Toolkit\DriveSpeed\
57360 Capture
57361 File %s saved.
57362 Error saving file %s.
57363 gdiplus.dll not found.\npng, jpeg and tiff output formats are unavaillable.
57364 Unable to load manual.\nPlease visit http://www.cdspeed2000.com or http://www.nero.com for the latest manual.
57365 Release failed.\n
57366 Releasing drive %s\n
57367 Do you want to try to release the drive?
57368 Disc Info
57369 C1 Errors
57370 C2 Errors
57371 PI Errors
57372 PI Failures
57373 WARNING! Simulation is not possible with this type of disc.
57374 You will not be able to write data on the disc after the test.
57375 Do you want to continue?
57376 CD Speed - DAE Test Disc
57377 This may take a few minutes.
57378 Jitter
57379 PO failures:
57380 The drive does not support overburning with this type of disc.
57381 Drive does not support this function.
57382 Disc type:
57383 Manufacturer:
57384 Code:
57385 Capacity:
57386 Book Type
57387 User Interface
57388 Unsupported image file
57389 Invalid disc type inserted.
57390 Image size too large for this disc.
57391 Writing image file
57392 Basic Information
57393 Write speeds:
57394 Blank Capacity
57395 Extended Information
57396 Layers
57397 Write strategies
57398 Layer break
57399 Raw Data
57400 Usage
57401 Recorder information
57402 Disc Status
57403 Empty
57404 Closed
57405 Open
57406 Copyright protection
57407 Track path
57408 Region(s)
57409 All
57410 Tracks
57411 Sessions
57412 Total
57413 File
57414 Position
57415 Length
57416 Quality
57417 Bad
57418 Title
57419 Chapter
57420 Track
57421 No disc inserted
57422 recorded with
57423 General Information
57424 Drive
57425 Firmware
57426 Disc
57427 Selected speed
57428 Scanning Statistics
57429 Elapsed time
57430 Number of samples
57431 Average scanning interval
57432 Glitches removed
57433 Benchmark
57434 ScanDisc
57435 seconds
57436 custom
57437 Legacy
57438 Neon
57439 Bright
57440 High Contrast
57441 Create Disc
57442 Realtime
57443 High
57444 Normal
57445 Low
57446 Image file too small
57447 Warning! Simulation may not be possible with this type of disc.
57448 Not enough memory
57449 Starting extra read tests
57450 Unsupported file system
57451 Write and verify disabled.
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61477 An invalid argument was encountered.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61722 Please enter a GUID.
61723 Please enter a time.
61724 Please enter a date.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61744 %1: %2\nContinue running script?
61745 Dispatch exception: %1
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
